Providing LWSS to NCPC habitation Roda Nallah Satahan in GP Lagdhar in Tehsil Sadar Distt Mandi HP

Amount

Providing and fixing aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shadeaccording to IS 1868. (Minimum anodiccoating of grade AC 15) fixed withrawlplugs and screws or with fixing clips,or with expansion hold fastners includingnecessary filling up of gaps at junctions, at top,bottom and sides with required PVC/neoprenefelt etc. Aluminium sections shall be smooth,rustfree, straight, mitred and jointed mechanicallywhere ever required including cleat angle,where ever required including cleat angle,aluminium, snap beading for glazing/panellingC.P. brass/stainless steel screws. All completeas per architectural drawings and the directionsas per architectural drawings and the directionsof Engineer-In-Charge.For fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron)

For Shutters of doors, windows & ventilators including providing and Fixing Hingies/ pivots and making rovision for fixing of fittings whereever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for seperatly)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge : Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing glazing in aluminium door window ventilator shutters and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawings and the directions of engineer in- charge (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5.50 mm thickness weight not less than 10.00 kg/sqm in all leads and lifts.

Providing and Fixing aluminium round shape of outer dia 100mm dia with SS screw etc. complete as per direction of Enginner-in- charge Powder coated minimum thickness 50 micron .

Steel work welded in built up sections/ framed work, including cutting, hoisting, Fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. within all leads and lifts.

Vikram Guleria (BID ID -502904)

Bhadur Singh (BID ID -502931)