Supply of Furniture for the use of Director of Provident Fund and Group Insurance at Purta Bhavan, Salt Lake during the year 2017 2018. WBPWD/EE/BNWD/NIQ-44e/2017 2018

Amount

Supply and placement godrej make or equivalent of ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001,AIOTA,Greenguard certified manufacturer's Table Model NUMERO UNO 2 layers of 18 mm thick MFC with 3 mm PVC edging.Edging of 2 colour tone MFC covered with 45 mm MDF profile at verticaledges. Connected to the top panel by minifix &wooden dowels. Adjustable Stud.18 mm thick MFC with curved shape. Connected toTop & Side panels with minifix fitting & Woodendowels, Pedestal :4 Drawers with central lock.Top drawer is pencil tray280 x 280 mm. Carcass 18 mm thick MFC and 25mm thick top panel. Black Metallic handles 128 mmdistance. 450 mm L runner. 55 diameter x 25 mm HPlastic adjustable glide. Connected to Top with 2 nos. of metallic support 109 mm H x 75 diameter.

Supplying & installation of Godrej Make or equivalent Leoma High Back Chair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, AIOTA, Greenguard Certified Manufacturers and as per approved drawing & design/secification of Engineer-in-charge. The cushioned seat assembly shall consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric. the insert moulded foam is assembeled over a load bearing plastic seat cover. The back shallmade up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-48.5cm, (H)-62.0cm & size of seat shall be (W)-52.5cm x (D)-51.0cm.Spine bracket shall made of Aluminium diecast piece connecting back with mechanism. The sled base leg frame welded assembly shall made from MSERW round tube with base plate for seat fixing. Overall dimensions of Chair shall be, Width of Chair - 71.0cm, Depth of Chair - 71.0 cm as measured from pedestal below. Height from ground - 98.0 cm. Seat height - 45.0cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Supplying & installation of Godrej Make or equivalent Gallop Mesh Back CHair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA, AIOTA, Greenguard Certified Manufacturers and as per approved drawing & design/ secification of Engineer-in-charge. The seat shall be made of Injection molded Plastic outer & inner. Plastic Inner shall be upholstered with fabric and moulded Polyurethane foam. The back shall be made of 1.2 ±0.1em. hot-pressed plywood measured & upholstered with fabric and moulded Polyurethane foam and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. Dimensions of Back shall be: (W)46.0 cm x (H)50.5 Cm, and of Seat : (W)46.0cm x (D) 48.0 cm. The HR polyurethane foam shall be moulded with Density= 45 ±2 kg/m3 and back hardness load 12 ± 2 kgf and seat hardness load 16 ±2 as per IS:7888 for 25% compression. spine cap shall be made up of Polypropylene which covers the back frame and spine junction. The armrests shall have only Up-Down adjustment- 8.0±0.5cm (8 positions) which shall be provided in armrest structure. Armrest Top is made up of PU with metal insert fitted on the armrest structure. The adjustable tilting mechanismshall be designed with the following features: • 360° revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Side tilt tension adjustment can be operated in seating position. • 4-position Tilt limiter giving options of variable tilt angle to the chair (5 steps: oo to 20° ±2° tilting). • Seat/back tilting ratio of 1:2., Seat depth adjustmentshall be integrated in the seat through a sliding mechanism. The pneumatic height adjustment shall have an adjustment of 10.0 ±0.3cm. The pedestal shall be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.1 ±0.5cm.pitch-center dia (76.1 ±1.0cm with castors). The twin wheel castors shall be injection moulded in black Polypropylene. overall dimwesions shall be as Seat Height - min 45.2 to max 55.2cm, Height - min96.3 to max 106.3cm.

Supplying & installation of godrej make or equivalent Helix Coffee table 10 mm tampered glass top8 mm tampered bottomglass for storage optionChrome plated understructure Passed 48 hours saltspray test Glass glass attached tothe understructure via UV disc Load bearing capacity :30Kg.

Supply and placement godrej make or equivalent of ISO 9001:2015, BIFMA, OHSAS 18000, ISO 14001, AIOTA, Greenguard certified manufacturer's Table model Finesse Set , top, side panel and modesty are made with 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING. 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDE. EDGE SEALED WITH 2MM THICK PVC BEADING. Extended Return Unit (ERU)top, side panel and modesty are made with 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING. 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDE. EDGE SEALED WITH 2MM THICK PVC BEADING.PEDESTAL SPECS: Configuration: Box + Box + File. Dimension: 390mm W X 435mm D X 720mm H (Including Leveler). Construction & Material: 0.8mm Thick CRCA for Body Shell, Drawer Front, Front Side Stiffener, Rear Side Stiffener & Bottom. 1.2mm Thick CRCA Top Stiffener * Bottom Stiffener. 0.6mm Thick CRCA Drawer Tray. The CRCA Should be Grade D as per IS-513. Drawer Specs: All Drawers with double extension precision ball slide. For Drawer Pulling, Side wise tapered recess should be provided in shell behind drawer front. Locking: a 10 lever Cam Lock & Central RH locking with actuator should be provided. Leveler: Plastic M8 Leveler should be mounted below the Body Shell. Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/- 10).

The seat is made up of 1.2±0.1cm thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded Polyurethane foam.the back is made up 1.2±0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and mouldedp polyurethane foam.The back ply and foam is designed with contoured lumber support for comfortable seating posture.Back size:48cm(W) x 76 cm(H),seat size : 51cm(W) x 48cm(D).The high resilience polyurethane foam for seat and back is moulded with density 5±2kg/m³ and hardness load16±2 kgf as per IS:7888 for 25% compression.The armrest top is made of moulded polyurethane and mounted on to a fixed type M.S. Tubular armrest support chrome plated.The arm support has static vertical adjustment of ±1.5±0.05cm.The mechanism is front pivot synchro mechanism with following features:360° revolving type,single point control,front pivot for tilt with feet resting on ground ensuring more comfort,tilt tension adjustment,4 position locking with anti-shock feature and seat/back tilting ratio of 1:2.The backrest has fixed type mechanism i.e.no back up/down adjustment.It should have pneumatic height adjustment of 9.0±0.3cm.The pedestal is fabricated from 0.2±0.02cm thick high resilience sheet(IS:DD 1079/HR skin pass),chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. Twin wheel castors.The pedestal is 66.0±0.05cm.Pitch center dia (76.0±1.0cm with castors).The twin wheel castors are injection moulded in black nylon.The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007 and should have Green Guard Certification for few of its products.

Supply and placement of ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001, Greenguard certified Godrej Make or equivalent desk Unit comprisesof (a) Main Desk , (b) ERU, (c) Back storage Unit and (d) Mobile pedestal. Main Desk is 1350w X 750d X 750h,The table top is in white cedar, side panels are in black, while the modesty panel is a combination of black & white cedar.The ERU is an independent standing unit.ERU sizeis:1200mm W x 450mm D x 750mm HThe ERU top is in white cedar, side panels are in black, whle the modesty panel is a combination of black & white cedar.The two drawer (1 box drawer & 1 filing drawer) Mobiles Pedestalwouldbeone size: 390 x 435 x529mm. The top & drawer fronts are in white cedar while theother components are in black.Tops / Worksurfaces : (White Cedar)Made from 18mm thick PLB with PVC lipping.Side Panels : (Black)Made form 18mm thick PLT with PVC lipping.Modesty Panel :Made form 18mm thick PLT with PVC lipping. Bigger upper panel in Black andsmaller lower panel in white Cedar. Shelf Storage units and Open shelf ERU : (Black)Made form 18mm thick PLT with PVC lipping. Mobile Pedestal :One Box and one Filing drawer with 18mm thick PLB fronts and top.

The seat is made up of 1.2±0.1cm thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded Polyurethane foam godrej make or equivalent.the back is made up 1.2±0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and mouldedp polyurethane foam.The back ply and foam is designed with contoured lumber support for comfortable seating posture.Back size:48cm(W) x 64.5 cm(H),seat size : 51cm(W) x 48cm(D).The high resilience polyurethane foam for seat and back is moulded with density 5±2kg/m³ and hardness load16±2 kgf as per IS:7888 for 25% compression.The armrest top is made of moulded polyurethane and mounted on to a fixed type M.S. Tubular armrest support chrome plated.The arm support has static vertical adjustment of ±1.5±0.05cm.The mechanism is front pivot synchro mechanism with following features:360° revolving type,single point control,front pivot for tilt with feet resting on ground ensuring more comfort,tilt tension adjustment,4 position locking with anti-shock feature and seat/back tilting ratio of 1:2.The backrest has fixed type mechanism i.e.no back up/down adjustment.It should have pneumatic height adjustment of 9.0±0.3cm.The pedestal is fabricated from 0.2±0.02cm thick high resilience sheet(IS:DD 1079/HR skin pass),chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. Twin wheel castors.The pedestal is 66.0±0.05cm.Pitch center dia (76.0±1.0cm with castors).The twin wheel castors are injection moulded in black nylon.The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007 and should have Green Guard Certification for few of its products.

Supply & placement of ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA & GREENGUARD Certified Table Model Godrej ENterprise 1500. Dimension of the table 1200x750x728. Main Table Desk Laminate with Edge Band & with Metal Under structure power coated. Top Worksurface 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding Under Modesty Panel 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges Structure are duly sealed with 2mm thick PVC Edgebanding Rectangular Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder Frame coat (Epoxy polyester) Leg Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) CPU Modesty 0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).

Supplying & installation of Godrej Make Ventillo Mid Back CHair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,Greenguard Certified Manufacturers and as per approved drawing & design/secification of Engineer-in-charge. .The seat shall be made of Injection molded Plastic outer & inner. Plastic Inner shall be upholstered with fabric and moulded Polyurethane foam. The back shall be made of 1.2 ±0.1em. hot-pressed plywood measured & upholstered with fabric and moulded Polyurethane foam and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. Dimensions of Back shall be: (W)46.0 cm x (H)50.5 Cm, and of Seat : (W)46.0cm x (D) 48.0 cm. The HR polyurethane foam shall be moulded with Density= 45 ±2 kg/m3 and back hardness load 12 ± 2 kgf and seat hardness load 16 ±2 as per IS:7888 for 25% compression. spine cap shall be made up of Polypropylene which covers the back frame and spine junction. The armrests shall have only Up-Down adjustment- 8.0±0.5cm (8 positions) which shall be provided in armrest structure. Armrest Top is made up of PU with metal insert fitted on the armrest structure. The adjustable tilting mechanismshall be designed with the following features: • 360° revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Side tilt tension adjustment can be operated in seating position. • 4-position Tilt limiter giving options of variable tilt angle to the chair (5 steps: oo to 20° ±2° tilting). • Seat/back tilting ratio of 1:2., Seat depth adjustmentshall be integrated in the seat through a sliding mechanism. The pneumatic height adjustment shall have an adjustment of 10.0 ±0.3cm. The pedestal shall be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.1 ±0.5cm.pitch-center dia (76.1 ±1.0cm with castors). The twin wheel castors shall be injection moulded in black Polypropylene. overall dimwesions shall be as Seat Height - min 45.2 to max 55.2cm, Height - min96.3 to max 106.3cm.

Welded Storwel Plain made with 2nos. Of adjustable full shelf. Its welded construction made with 0.7 mm thk.(+ 0.07mm)crca*for shelf, 0.8mm(+ 0.08mm)hight yierd srrength CRCA*8 for doors and back and 0.9mm thk. (+ 8mm) CRCA* for all other components. The *CRCA'D' grade as per IS:513 and *CRCA'D' grade high yield strength as per IS:513. Mazak handle and three way locking mechanism with shooting bolt. Height wise adjustable shelf mounting and for uniformly distributed load capacity per each full shelf is 40 Kg maximum. It has 2nos. Of adjustable full shelf and Box file A4 size (Height - 1270mmmm x Width - 765mm x Depth - 440mm) can be stored vertically on three shelves and the clear space above fourthn shelf is 240mm. The M10 screw type leveler with hex plastic base and epoxy powder coated to the thickness of 50 microns (+10).The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007.

Welded Storwel Plain made with 4nos. Of adjustable full shelf. Its welded construction made godrej make or equivalent with 0.7 mm thk.(+ 0.07mm)crca*for shelf, 0.8mm(+ 0.08mm)hight yierd srrength CRCA*8 for doors and back and 0.9mm thk. (+ 8mm) CRCA* for all other components. The *CRCA'D' grade as per IS:513 and *CRCA'D' grade high yield strength as per IS:513. Mazak handle and three way locking mechanism with shooting bolt. Height wise adjustable shelf mounting and for uniformly distributed load capacity per each full shelf is 40 Kg maximum. It has 4nos. Of adjustable full shelf and Box file A4 size (85W X 345HX285D) can be stored vertically on three shelves and the clear space above fourthn shelf is 240mm. The M10 screw type leveler with hex plastic base and epoxy powder coated to the thickness of 50 microns (+10).The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007.

Supplying & installation of Godrej Make or equivalent ENterprise 1200 Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,Greenguard Certified Manufacturers and as per approved drawing & design/secification of Engineer-in-charge. . Dimension of the table 1200x750x728. Main Table Desk Laminate with Edge Band & with Metal Under structure power coated. Top Worksurface 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding Under Modesty Panel 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges Structure are duly sealed with 2mm thick PVC Edgebanding Rectangular Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder Frame coat (Epoxy polyester) Leg Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) CPU Modesty 0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).

Supply and placement of ISO 9001:2008, BIFMA, OHSAS 18000, ISO 14001, certified lounge chair model Nano Perch of Godrej make or equivalent. Cross beam shall be made up of black powder coated rectangular M.S.ERW tube having 8 ± 0.03 cm x 4 ± 0.03 cm x 0.2 ± 0.016 cm size. Leg and armrest shall be chrome plated made of cold rolled steelwith 0.12 ± 0.013 cm thinkness. Seat back shell shall be 1.6 mm thk powder-coated perforated shell made from cold rolled M.S. sheet 0.16 ± 0.013 em thickness. The Side Bar shall be made of Chrome plated solid steel 3 ± 0.03 cm x 1.2 ± 0.3 cm (DIN174)with fluting and plastic inserts.The Shell shall be assembled on the Cross Beam with help of M8 Bolts (Per Seat- 8 nos. Seat to Bracket and 4nos. Bracket to Cross Beam). The seat & back cushion shall be made up of PU foam upholstered with leather cloth or fabric with plywood. Overall Dimensions shall be Seat Height - 41.0cm, Height - 71.0cm, Width & Depth of Chair as measured from pedestal - Width-160.0cm and Depth-56.0 cm. Bidders must have Greengurd & green assurance certificate for few of its product for environment friendly practice, 3 Seater.

Supplying and placement of Godrej make or equivalent drive type 2 Bay optimizer ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturer as per approved drawing & design / secification of Engineer-in-chargeMain Body: (a) Construction: Body is made of CRCA Steel conforming to IS:513 Gr.D in Knock Down construction. The sheet thickness for the back & the shelves is 0.8mm while that of the sides & top is 0.9mm. For model 2 there shall be 6 loading levels formed by 5 nos. of adjustable shelves. Body units are bolted to undercarriage.. (b) Size : Depth-457( mm) Width-1830(mm) Height-1980 (mm) (Body). Height with Undercarriage & Rails (mm ) Model 2 - 1980 + 65 + 35 = 2080. Finish: The body including shelves are given antirust surface treatment & are powder coated with epoxy polyester powder. It involves an 8 step treatment consisting of Hot water rinse, Knock of degreasing, degreasing, Cold water rinse, phosphating, cold water rinse, passivation & dry off oven treatment. Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns. The testing of paint is done for various physical & chemical properties as per IS:101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Shelf: (a) Construction: It is made of 0.8 thk CRCA steel conforming to IS:513 Gr.D or DD. It’s max load bearing capacity is 80 Kg uniformly distributed per shelf but depending on configuration it changes. Please refer to the chart mentioned below giving breakup of allowable UDL per Shelf as per different configurations. Shelves are mounted on support brackets & shelf level can be adjusted at approx. 25.4 pitch. There are 5 adj. Shelves making 6 loading levels. (b) Size: Shelf Depth: Where unit Depth 457 mm Shelf Depth 415 mm.Undercarriage: (a) Construction: The Undercarriage is a Knock Down frame made of HR sheet 3.15 mm thk conforming to IS:10748 suitably fabricated to take the loads based on configuration. (b) Size: Sizes of Undercarriage : Single Static – 1830 X 457 (Depth) X 1980 (Height).

Supplying and placement of Godrej make or equivalent drive type 2 bay optimizer ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturer as per approved drawing & design / secification of Engineer-in-chargeMain Body: (a) Construction: Body is made of CRCA Steel conforming to IS:513 Gr.D in Knock Down construction. The sheet thickness for the back & the shelves is 0.8mm while that of the sides & top is 0.9mm. For model 2 there shall be 6 loading levels formed by 5 nos. of adjustable shelves. Body units are bolted to undercarriage.. Also, each body is bolted back to back for Twin mobile & side to side for multiple bays. (b) Size : Depth-457( mm) Width-1830(mm) Height-1980 (mm) (Body). Height with Undercarriage & Rails (mm ) Model 2 - 1980 + 65 + 35 = 2080. Finish: The body including shelves are given antirust surface treatment & are powder coated with epoxy polyester powder. It involves an 8 step treatment consisting of Hot water rinse, Knock of degreasing, degreasing, Cold water rinse, phosphating, cold water rinse, passivation & dry off oven treatment. Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns. The testing of paint is done for various physical & chemical properties as per IS:101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Shelf: (a) Construction: It is made of 0.8 thk CRCA steel conforming to IS:513 Gr.D or DD. It’s max load bearing capacity is 80 Kg uniformly distributed per shelf but depending on configuration it changes. Shelves are mounted on support brackets & shelf level can be adjusted at approx. 25.4 pitch. There are 5 adj. Shelves making 6 loading levels. (b) Size: Shelf Depth: Where unit Depth 457 mm Shelf Depth 415 mm..Undercarriage: (a) Construction: The Undercarriage is a Knock Down frame made of HR sheet 3.15 mm thk conforming to IS:10748 suitably fabricated to take the loads based on configuration. (b) Size: Sizes of Undercarriage : Twin Mobile -1830 (Width) X 915 (Depth) X 1980 (Height) External Load carrying capacity per understructure DRIVE TYPE (Configuration - TYPE D3)-1200 Kg. Maximum. (c) Finish: The undercarriage, after pre-treatment, is coated with final finish consisting of epoxy polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 40 microns.

Supplying and placement of Godrej make or equivalent drive type 2 Bay optimizer ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturer as per approved drawing & design / secification of Engineer-in-chargeMain Body: (a) Construction: Body is made of CRCA Steel conforming to IS:513 Gr.D in Knock Down construction. The sheet thickness for the back & the shelves is 0.8mm while that of the sides & top is 0.9mm. For model 2 there shall be 6 loading levels formed by 5 nos. of adjustable shelves. Body units are bolted to undercarriage. Also, each body is bolted back to back for Twin mobile & side to side for multiple bays. (b) Size : Depth-457( mm) Width-1830(mm) Height-1980 (mm) (Body). Height with Undercarriage & Rails (mm ) Model 2 - 1980 + 65 + 35 = 2080. Finish: The body including shelves are given antirust surface treatment & are powder coated with epoxy polyester powder. It involves an 8 step treatment consisting of Hot water rinse, Knock of degreasing, degreasing, Cold water rinse, phosphating, cold water rinse, passivation & dry off oven treatment. Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns. The testing of paint is done for various physical & chemical properties as per IS:101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Shelf: (a) Construction: It is made of 0.8 thk CRCA steel conforming to IS:513 Gr.D or DD. It’s max load bearing capacity is 80 Kg uniformly distributed per shelf but depending on configuration it changes. Please refer to the chart mentioned below giving breakup of allowable UDL per Shelf as per different configurations. Shelves are mounted on support brackets & shelf level can be adjusted at approx. 25.4 pitch. There are 5 adj. Shelves making 6 loading levels. (b) Size: Shelf Depth: Where unit Depth 457 mm Shelf Depth 415 mm.Undercarriage: (a) Construction: The Undercarriage is a Knock Down frame made of HR sheet 3.15 mm thk conforming to IS:10748 suitably fabricated to take the loads based on configuration. (b) Size: Sizes of Undercarriage : Single last – 1830 X 457 (Depth) X 1980 (Height).External Load carrying capacity per understructure DRIVE TYPE (Configuration - TYPE D3)-1200 Kg. Maximum. DRIVE TYPE . (c) Finish: The undercarriage, after pre-treatment, is coated with final finish consisting of epoxy polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 40 microns.

Supplying and placement of Godrej make or equivalent channel for optimizer ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturer as per approved drawing & design / secification of Engineer-in-charge. Channel 9' For 2 Bay Optimizer.Movement of units is achieved mechanically through a Drive wheel and ‘SprocketChain-Tensioner’ arrangement mounted rigidly onto body side. Each movable understructure is provided with 2 Rollers on shaft for driving,2 antifriction ball bearings for rolling and 4 antifriction ball bearings for guiding between rails & ‘J’ section. The Drive wheel is rigidly fixed at suitable height on body side & projects out of cover by another 110 mm. Fixed unit also have Cover but without wheel.

JYOTI COMMERCIAL CORPORATION

WELL DECOR