SEOP 15/2021-22

Amount

11 KV H T line

Prov.Steel Tubular pole 9 mtr.long w/L 200 Kg.

Prov.RCC Muff with concerete feeling

Prov A.I.Knee bracing set 2x(750x50x50)mm for single pole

Prov. C.I.X-arm 1500 x 100x50 mm single pole

Prov. C.I.X-arm 2400 x 100x50 mm for Double pole

Prov. C.I.X-arm 1800 x 100x50 mm for guarding

Prov A.I.Knee bracing set for double pole (1500x50x50) (2700x50x50) 2 nos. for each set

Prov. Pin Insulator with pin hellically formed fitting (set of 3 No.)

Disc Insulator set cleaves and tongue helically formed fitting

Prov. H.T.Stay set Complete

Prov. Stay wire 7/3.15 mm ( @ 8.0 kg Per Stay set )

Prov. Coil earthing for steel pole

Prov G.I.wire 8 SWG for guarding Across the road

Danger Plate ( 203x200x1.6mm)

Prov. Nut & Bolt ( off sizes )

Prov. Pole Top Clamp

Barbed wire

Aluminum Paint

Prov. Back Clamp (MS Flate 50x6) mm

Prov.AAAC 7/3.81mm ( 80mm2 )

Earth Hook HT 8" Long

100 KVA Sub-station

11/0.4 KV 100 KVA Distribution Transformer

C.I. X-Arm (2800X100X50 mm) for X-Arm Transformer base Main Channel (4 Pole Structure)

C.I (460X100X50 mm) for supporting Main Channel of Trransformer

Transformer Belting

I) Angle for (2800X50X50 mm)

II) Angle for (460X35X35 mm)

LT Distribution Panel Box with MCCB 100 Amp.

M.S. Nuts and Bolts (Off Sizes)

LT Cable (3.5 Core)95 mm2

Metering Equipment

S/T Pole 9Mtr. W/L 200 kg

RCC Muff

C.I. X-Arm (2800X100X50 mm) for X-Arm Transformer base Main Channel (4 Pole Structure)

C.I (460X100X50 mm) for supporting Main Channel of Trransformer

Transformer Belting

I) Angle for (2800X50X50 mm)

II) Angle for (460X35X35 mm)

Transformer Bed (1.2x1.5x1.5)mm

C.I. for GO Switch (2800X75X40 mm)

C.I. for Fuse Unit/AB Switch (2800X75X40 mm)

A.I X Arm for Lightning Arrestor (2800X50X50 mm)

G.O.Switch 400 Amp.

D.O.Fuse

Lightning Arrestors

Disc Insulator with Fitting

Stay Set complete

Stay Wire 7/3.15 mm ( @ 8.0 kg Per Stay Set)

Pipe Earthing

Half Clamp (M.S. Flat 50X6 mm)

Full Clamp (M.S. Flat 50X6 mm)

M.S. Nuts and Bolts (Off Sizes)

PVC wire 4mm flexible

G.I. Thimble

G.I. pipe 1.5 mm dia

G.I. pipe band

G.I. glands

Danger Plate

Barbed Wire

LT Cable (3.5 Core)120 mm2

Prov. CT/PT unit of ratio 100/5 amp

HT Electronic Meter 100/5Amp.

Aluminium Paint.

Prov. AAAC 7/3.81 mm2

LT line

Steel Tubular Pole 8 Mtr. Long

RCC Muff for 8 Mtr.Long Poles.

Shackle Insulator with D-Iron

Prov. Egg Insulator

Prov. Eye Hook Bolt

LT Stay Set Complete

Stay Wire 7/3.15mm @ 6.0Kg.Per Stay Set

GI Wire 8 SWG

M.S Nuts & Bolts (off sizes)

Prov. Aluminium paint

AAAC 7/3.15mm (50mm2)

Civil work

Excavation in foundation and trenches etc. in earth work lift upto 1.5 mtrs stacking the excavated soil not more than 3 mtrs clear from the edge of excavation and then disposing of all surplus excavated soil within a lead of 20mtrs in pick & jumper work (50% each).

P/L cement concrete 1 : 6 : 12 ( 1 cement, 6 sand, 12 graded stone aggregate 40 mm NS) and curing complete in foundation and plinth.

Providing and laying cement concrete 1:2:4( 1 cement, 2 sand, 4 graded stone aggregate 20mm NS) and curing complete

Form work with steel plates 3.15mm thick welded in frame 30*30*5mm angle iron for foundation, footings basis of columns etc. and mass concrete.

Providing Tor/Mild steel reinforcemnt i/c bending, binding and placing in postion complete.

P/L R.C.C. 1 : 2 : 4( 1 cement, 2 sand, 4 graded stone aggregate 20 mm NS) and curing complete, excluding cost of form work and reinforcement.

Boulder filling dry hand packed tightly as in wire crate under floors

Steel work welded in built up sections, trusses, angles, frame work i/c cutting, hosting & fixing in position and applying priming coat of red lead oxide. In beams joists channels ,angles, tee ,flats with connecting plates or angle cleats as in main andcross beams,hip and jack rafters,purlins connected to common rafters and the like.

Supplying and fixing expended metal to wood or steel members in partitions etc..Weight not exceeding 3kg.per square metre.

Painting (two coats) on new steel or steel based metal surface.

20mm thick cement plaster in single coat in cement mortar 1:5 (1 cement, 5 sand).

Cement concrete flooring 1 : 2 : 4( 1 cement, 2 sand, 4 graded stone aggregate 20 mm NS) (50mm thick).

P/F oxidised M.S. Sliding door bolt with nuts and screws etc. complete (250*16mm)

P/F oxidised M.S. handle with necessary screws etc. complete (125mm)

Novelty Enterprises

DEEPANSHU GAUTAM GOVT. CONTRACTOR

M/S DEVARYA ENGINEERING