e tender for Interior works, supply and Installation of Electrical items at Thiruvananthapuram

Amount

Flase ceiling with Perforated board and GI pipe

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanised with zinc coating of 120gms/sqm(both side inclusive ) as per IS: 277 and consisting of angle cleates of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm , at 1200 mm centre to centre , one flange fixed to the angle hangers of 25x10x.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45x15x0.9 mm running at the rate of 1200 mm centre , to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5 mm , at 600 mm centre to centre ,shall be fixed in a direction perpendicular to G.I Intermediate channel with connecting clips made out of 2.64 mm dia x230 mm long G.I wire at every junction , including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long , perimeter of ceiling fixed to wall partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacture's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I.

1.5 TR Inverter 3 star split AC

Stabilizer

Installation, testing & commissioning of Split Unit (Setting Up External Unit)

Drain Piping

Copper Piping

Communication Cable

Electrical Work for light points - 8 Light points controlled by one switches 2 run wire.

Electrical Work forAC points - 2 AC points controlled by one switch each

Short throw Projector -

Moulding Kit for projector

PA System Ahuja make - Mic 5 Nos , Speaker 10W - 2 Nos, Amplifier with wiring and Electrical Connection

Painting with one primer and Two cot Paint ,applying additional one coat putty for false ceiling

LED Lights

Vertical Blinds

U Shape Table (Conference Table) frame with 18 mm Prelaminated board Size : 15'/15 D x 26'' W x 30'' H

L' Shaped Cupboard having two compartments with lock and key Size -90/60x70x35 cm

ROOPA WOOD STEEL FURNITURE MART