Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC H NO 03 TULSI BAGH SRINAGAR J K 190001 | SRINAGAR | JAMMU AND KASHMIR | 190001 | ₹28.5 L Quoted ₹29.2 L | L1 | Accepted-AOC Lowest Bidder and quoted reasonable rates |
| 2 | L2₹30.1 LRejected-Finance | ₹30.1 L | L2 | Rejected-Finance Other than lowest bidder |
| 3 | L3₹30.3 LRejected-Finance H NO 01 MADINA BAGH MEHJOOR NAGAR NEAR HOTEL RAFADA SRINAGAR 190015 J K | BUDGAM | JAMMU AND KASHMIR | 190015 | ₹30.3 L | L3 | Rejected-Finance Other than lowest bidder |
| 4 | L4₹31.4 LRejected-Finance | ₹31.4 L | L4 | Rejected-Finance Other than lowest bidder |
| 5 | L5₹32.8 LRejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | ₹32.8 L | L5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | BALVINDER SINGH AND SONS L6 | M/S RAVINDER SINGH L2 | M/s Aman Enterprises L5 | GAGAN ASSOCIATES L7 | HARMEET TRADERS L1 | SONAM ANGCHOK L6 | M/S BALI CONSTRUCTIONS L3 | M/s B R Constructions L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge. | 549 | Sqm | 65 ₹35,685 | 55 ₹30,195 | 30 ₹16,470 | 50 ₹27,450 | 50 ₹27,450 | 65 ₹35,685 | 65 ₹35,685 | 70 ₹38,430 |
| 2.00 | Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge. | 1,220 | Rm | 45 ₹54,900 | 45 ₹54,900 | 20 ₹24,400 | 50 ₹61,000 | 15 ₹18,300 | 45 ₹54,900 | 10 ₹12,200 | 15 ₹18,300 |
| 3.00 | S&F second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or breads complete all as specified and directed by Engr-in-Charge. | 1,220 | Rm | 45 ₹54,900 | 45 ₹54,900 | 150 ₹1.8 L | 150 ₹1.8 L | 65 ₹79,300 | 45 ₹54,900 | 55 ₹67,100 | 65 ₹79,300 |
| 4.00 | S&F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in walls complete all as specified and directed by Engr-in-Charge. | 330 | Sqm | 1,250 ₹4.1 L | 1,000 ₹3.3 L | 1,000 ₹3.3 L | 1,100 ₹3.6 L | 1,100 ₹3.6 L | 1,250 ₹4.1 L | 1,150 ₹3.8 L | 1,020 ₹3.4 L |
| 5.00 | S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in ceiling or sloping portion complete all as specified and directed by Engr-in-Charge. | 219 | Sqm | 1,150 ₹2.5 L | 1,000 ₹2.2 L | 950 ₹2.1 L | 1,000 ₹2.2 L | 1,025 ₹2.2 L | 1,150 ₹2.5 L | 1,100 ₹2.4 L | 1,020 ₹2.2 L |
| 6.00 | S&F second class softwood moulding as in cornices, picture rails and the like sectional area exceeding 3 Sqcm and n.exc 6 sqcm fixed with nails complete all as specified and directed by Engr-in-Charge. | 180 | RM | 45 ₹8,100 | 45 ₹8,100 | 120 ₹21,600 | 100 ₹18,000 | 75 ₹13,500 | 45 ₹8,100 | 75 ₹13,500 | 45 ₹8,100 |
| 7.00 | M&L for Plain fillets of second class soft wood, sectional area not exceeding 3 Sqcm square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed by Engr-in-Charge. | 470 | RM | 45 ₹21,150 | 45 ₹21,150 | 100 ₹47,000 | 100 ₹47,000 | 55 ₹25,850 | 45 ₹21,150 | 55 ₹25,850 | 45 ₹21,150 |
| 8.00 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed by Engr-in-Charge. | 322 | Sqm | 10 ₹3,220 | 10 ₹3,220 | 100 ₹32,200 | 50 ₹16,100 | 10 ₹3,220 | 10 ₹3,220 | 10 ₹3,220 | 10 ₹3,220 |
| 9.00 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. | 302 | Sqm | 950 ₹2.9 L | 900 ₹2.7 L | 1,000 ₹3.0 L | 1,200 ₹3.6 L | 1,050 ₹3.2 L | 950 ₹2.9 L | 1,050 ₹3.2 L | 1,000 ₹3.0 L |
| 10.00 | S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | 20 | Sqm | 950 ₹19,000 | 900 ₹18,000 | 1,000 ₹20,000 | 1,300 ₹26,000 | 1,025 ₹20,500 | 950 ₹19,000 | 1,025 ₹20,500 | 1,000 ₹20,000 |
Tender Value
₹27.5 L
EMD Value
₹55,000
Closing Date
27 Nov 2025, 6:00 pmClosed
Garrison Engineer Kargil
Garrison Engineer Karg
SPL REPAIR TO BLDG NO P11 NCC LINE T556 T557 T-572 T573B T574B OF 22 KUMAON AND T86 AT KHARBU UNDER GE KARGIL
2025_MES_738584_1
CA NO. GE/K-55/2025-26
Open Tender
Civil Works
180 days
Kargil
AS PER NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Karg
₹55,000
Yes
25 Feb 2026
6 Nov 2025
28 Nov 2025
6 Nov 2025
27 Nov 2025
20 Nov 2025
Amount
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.
Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge.
S&F second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or breads complete all as specified and directed by Engr-in-Charge.
S&F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in walls complete all as specified and directed by Engr-in-Charge.
S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in ceiling or sloping portion complete all as specified and directed by Engr-in-Charge.
S&F second class softwood moulding as in cornices, picture rails and the like sectional area exceeding 3 Sqcm and n.exc 6 sqcm fixed with nails complete all as specified and directed by Engr-in-Charge.
M&L for Plain fillets of second class soft wood, sectional area not exceeding 3 Sqcm square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed by Engr-in-Charge.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed by Engr-in-Charge.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 20mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
Taking down Chowkhats or frames exc 1.5 sqm but n exc 4 sq. m each without taking off shutters from the frames complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames not exc. 1.5 sqm complete all as specified and directed by Engr-in-Charge.
S&F plain solid straight chowkats and framed wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints in 2nd class soft wood KAIL complete all as specified and directed by Engr-in-Charge.
S&F 30 mm thick 2nd class soft wood (KAIL) plain framed panelled shutter (any number of panels) with panels of timber flat on both sides (Feather edge) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat complete all as specified and directed by Engr-in-Charge.
S&F 30 mm thick 2nd class soft wood (KAIL) glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers complete all as specified and directed by Engr-in-Charge.
M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface complete all as specified and directed by Engr-in-Charge.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr-in-Charge.
S&F 150mm long alluminium anodized, barrel tower bolts extruded section & fixed complete all as specified and directed by Engr-in-Charge.
S&F anodised aluminium barrel tower bolt extruded sections 100 mm size complete all as specified and directed.
S&F mild steel 100 mm long Butt hinges medium weight,cold rolled all as specified with galvanised mild steel screws complete all as specified and directed by Engr-in-Charge.
S&F 75 mm butt higes medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed by Engr-in-Charge.
S&F Aluminium anodised handles, cast type anodised 125 mm long fixed with screws complete all as specified and directed by Engr-in-Charge.
S& F aluminium handles cast type anodised size 100mm fixed with screws complete all as specified and directed by Engr-in-Charge.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300mm long complete all as specified and directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde-E-250) quality- A complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new untreated steel / iron surfaces of any description over 10cm in width or girth not otherwise described and painting two coat of synthetic enamel paint over a coat of red oxide zinc chrome complete all as specified and directed by Engr-in-Charge.
S&F Aluminum Anodised barrel tower bolts of extruded section, 200mm long fixed with screws complete all as specified and directed by Engr-in-Charge.
S&F anodised aluminium handle, cast type anodised section 150mm size fixed with screws complete all as specified and directed by Engr-in-Charge.
S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by Engr-in-Charge.
S&F 300 mm long brass body ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.
Excavation over areas n.exc 1.5 m depth in hard/dense soil and getting out complete and all as specified and as directed by the Engr-in-charge
M&L PCC type D-2 1:4:8 (40mm graded agg) in foundation, filling and mass concrete incl sub base or similar works complete all as specified and directed by Engr-in-Charge.
M&L for stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete all as specified and directed by Engr-in-charge.
M&L for Boulder pitching laid dry, hand packed tightly complete all as specified and directed by Engr-in-charge.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.
M&L for Hard core of broken stone of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.
M&L for 75 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in plinth protection and subbase to floors complete all as specified and directed by Engr-in-Charge.
Demolition of precast concrete articles and precast concrete block walling including all quoins, arches, pillars, etc built in cement mortar of any description not other specifically provided for etc complete all as specified and directed by Engr-in-Charge.
M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finishing of surface even and smooth with out using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed by Engr-in-Charge.
M&L for prepration of old plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square / rectangle) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work including 15 thick screed bed in CM ( 1:6) complete all as specified and directed.
M&L for coloured glazed ceremic tiles in vertical surfaces 450x350x7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15mm thick rendering in CM (1:4) complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed by Engr-in-Charge.
M&L for 25 mm thick PCC 1:2:4. type B-0 (using 12.5 mm graded aggregate) as subbase to flooring or similar works complete all as specified and directed by Engr-in-Charge.
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20mm dia pipes complete all as specified and directed by Engr-in-Charge.
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 25 mm dia pipes complete all as specified and directed by Engr-in-Charge.
S&F 20mm outer diameter 3-layer PP-R (polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge.
All as per Srl Item No.54 above but 25mm outer diameter complete all as specified and directed by Engr-in-Charge.
S&F in repair 25mm dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed by Engr-in-Charge.
Dismantling PVC water tanks of capacity exc 500 but n exc 1000 ltr and removing to store complete all as specified and directed by Engr-in-Charge.
S&F 1000 ltr capacity rotationally moulded polythene water storage tanks (cylindrical vertical with closed top) multilayers layers of approved make hoisted & fixed at position complete all as specified and directed by Engr-in-Charge.
S&F 3mm thick figured glass ordinary quality and glazing fixed with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces complete all as specified and directed by Engr-in-Charge.
M&L for two coats of oil bound distemper on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
M&L for two coats of oil bound distemper on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-Charge.
Taking down PVC pipe, eaves and gutters (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends with oval access door complete all as specified and directed by Engr-in-Charge.
S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval acess door complete all as specified and directed by Engr-in-Charge.
S&F in repairs 10 ltrs capacity PVC valveless syphonic action type low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed by Engr-in-Charge.
S&F in repair Vitreous china wash down water closet pan orissa pattern size 580x440mm (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed by Engr-in-Charge.
S&F in repair 15mm bore dia angle valves of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed by Engr-in-Charge.
S&F in repair 15mm bore PVC connection 600mm long both ends screwed with brass cap complete all as specified and directed by Engr-in-Charge.
S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.
S&F in repair brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge.
M&L for preparing old wooden surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
M&L for preparing old steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash on ceiling complete all as specified and directed by Engr-in-Charge.
M&L for Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc complete all as specified and directed by Engr-in-Charge.
M&L for Point wiring for light/fan/bell with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate,flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch.
All as per Srl item No. 78.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board.
All as per Srl item No. 78.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board.
S&F Switch piano flush type 5 Amps, single pole one way complete all as specified and directed by Engr-in-Charge.
S&F Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type complete all as specified and directed by Engr-in-Charge.
S&F Switch socket combination 2 in 1, 5 and 15 Amps flush type complete all as specified and directed by Engr-in-Charge.
M&L of ceiling rose on PVC square blocks surface bakelite 3 terminal complete all as specified and directed by Engr-in-Charge.
S&F LED lights fitting, surface mounting general purpose ultra slim economical LED batten of 1x 18W/20W, lumen out put 100lm/wattt, CCT:6500K/3000K , PF>0.9, in extruded PC housing and round/square shaped diffuser including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.
S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 12 way with 200 Amp rated bus bar including blanking plates where required complete all as specified and directed by Engr-in-Charge.
S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required complete all as specified and directed by Engr-in-Charge.
S&F in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing complete all as specified and directed by Engr-in-Charge.
S&F in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 32 Amp in the MCB DB complete with connection testing complete all as specified and directed by Engr-in-Charge.
S&F in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing Complete all as specified and directed.
S&F LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant with driver and lamp complete all as specified and directed by Engr-in-Charge.
M&L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm×6.0mm thick, buried directly in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel and connected to main switch board or equipment, including watering arrangement with GI medium grade 20mm bore watering pipe with funnel and wire mesh with PCC chamber CI cover with frame including 15mm dia GI pipe light grade for protection of earthing lead etc including necessary excavation in any type of strata, returning, filling, removal of soil outside MD land, filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I, connected to earthing test point all as specified or indicated including testing on completion. Notes : (i) Earth continuity conductor including protection pipe upto 7.5 meters from earth electrode will be include in unit rate, (ii) Arrangement for earth resistance test should be carried out by the contractor. No extra payment shall be provided for the same.
M&L for submain wiring comprising single core, 2 Runs of 6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including min 2mm thick PVC Casing Caping ISI Marked(heavy duty) and its fittings on surface/recessed complete including 1X6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS including taking down old UNSV submain wiring and making good the disturbed surface complete all as specified and directed by Engr-in-charge. (Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)
S&F in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm including making arrangement for fixing complete all as specified and directed by Engr-in-Charge.
S&F in replacement1100 volts grade heavy duty 16 Sqmm 2 core flat cable PVC insulated aluminium standard conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed by Engr-in-Charge.
S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 4 way with 200 Amp rated bus bar including blanking plates where required complete all as specified and directed by Engr-in-Charge.
M&L for Submain wiring comprising single core, 2 Runs of 4.0 Sqmm nominal cross sectional area multi stranded FRLS copper coonductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including min 25mm dia. PVC conduit/ PVC Casing Caping ISI Marked (heavy duty) and its fittings on surface/recessed complete including 1x4.0 Sqmm nominal cross sectional area mutli stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 volts grade as earth wire and using color code as per IS including taking down UNSV submain wiring and making good the disturbed surface complete all as specified and directed by Engr-in-charge. (Note: Extra length of cables/ wire required for connection to MCBs shall not be paid seperately and the rate quoted by contractor for per unit shall be deemed accordingly)
S&F in replacement 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified.
Note : Deduction for amount of Rs. 61,583.00 as listed in Schedule 'A' Part-II (Schedule of Credit) shall be made while awarding of contract.
M/S RAVINDER SINGH (BID ID -3483440)
M/S BALI CONSTRUCTIONS (BID ID -3483415)
M/s B R Constructions (BID ID -3483448)
M/s Aman Enterprises (BID ID -3483759)
BALVINDER SINGH AND SONS (BID ID -3483433)
SONAM ANGCHOK (BID ID -3484017)
GAGAN ASSOCIATES (BID ID -3483797)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
T55.pdf
Tender Documents • 1.15 MB
BOQ_827006.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid