COMPREHENSIVE REPAIR AND MAINTENANCE IN THE AOR OF AGE B/R-II AS PER CPP FY 2024-25 (SER NO 10) UNDER GE (ARMY) NO 2 JODHPUR

Amount

Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismanteling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L 25 mm thick plain cement concrete (1:2:4) type B-1, (20mm graded aggregate) as levelling course/undulation of floor etc complete all as specified and as directed.

M&L for Vitrified ceramic (Coloured) tiles Dark shade/double charged 10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed.

M&L for Vitrified ceramic (coloured) tiles Dark shade/double charged 10mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size not exceeding 0.36 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for non skid ceramic(Coloued)tiles 7-8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and as directed.

M&L for non skid ceramic(Coloured)tiles 7-8mm thick (square/ rectangular) as in skirting / dado, cut out of ceramic tiles of size exceeding 0.11 sqm but not exceeding 0.18 sqm, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for non skid ceramic (coloured) tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic (coloured) tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) as in backing coat of tiles complete all as specified and as directed.

M&L for 16 -18mm thick granite (colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-20 mm (+ 2mm) thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for mirror polished machine cut kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in cement mortar (1:4) and jointed complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc complete all as specified and as directed.

Providing and laying 60mm thick factory made table vibratory, PU mould, chamfered edge cement concrete coloured paver block of M-35 grade with approved design & pattern as in footpath, drive ways or parking etc; over and including 50mm thick compacted bed of fine sand and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with sand and cutting of paver blocks as required complete all as specified and as directed.

Providing and laying factory made kerbs stone any size of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, embedded in position including all necessary excavation, tamping ground around blocks and removal of rubbish/ surplus soil etc; making joints with or without grooves, drainage opening wherever required complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified and as directed.

Dismantling of stone/ brick work masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work, serviceable stone aside for reuse and removing unserviceable material in low laying area complete all as specified and as directed.

M&L for squared rubble walling jodhpur type, brought upto course, well bonded bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

-ditto- all as per above item but, except stone complete all as specified and as directed.

Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, brought upto courses all as specified and as directed.

M&L Old size brick work using fly ash bricks conforming to IS-12894:2002, non Modular,class designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4) complete all as specified and as directed.

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed

M&L for rendering 15 mm thick in cement mortar (1:6) over stone masonary, concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for 15 mm thick rendering on stone masonary wall surfaces in cement mortar (1:4) finished fair and even complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar (1:3) on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for dubbing out average 20mm thick in cement plaster (1:4) on uneven/ irregular surface such as walls / ceilling / chajjas etc complete all as specified and as directed.

S&F low carbon annealed wire in hexagonal shape 1.0mm diametre chicken wire mesh of size 25mm (distance between the faces of the hexagon), durable twisted woven mesh for mounting on curved and angled surfaces including 15cm lap at junction fixed with nails and properly stapled complete all as specified and as directed.

Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each and refixing the shutter in same opening after easing and adjusting complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified and as directed.

Dismantling structural steel work in?cluding doors, gates but excluding framed truss etc complete all as specified and as directed.

S&F of framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) complete all as specified and as directed.

S&F Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel, flat or MS hollow square/ rectangular any type, size/ sections), including distance pieces, cleats etc conforming to FE- 290 (Gde-E- 165) including fabrication, erraction and fixing complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated/ Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling boarding of any description fixed in any position with nails complete all as specified and as directed.

S&F in repair PVC hollow wall lining interlocking type 5-7mm thick plain/ coloured, fitted into the wall with PVC rawal plugs and steel screws including fillets on joints as per manufacturers instruction complete all as specified and as directed. (Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing.)

S&F in repair PVC hollow false ceiling interlocking type 5-7mm thick plain/ coloured, fitted with MS hollow grid (light weight) section 25mmx25mmx1mm thick including fillets on joints, with hanging arrangements and including maintain levels with adjustable clips complete all as specified and as directed. (Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing.)

S&F in repair Gypsum board 6-8mm thick in ceilling fixed with screw as per manufacturer's instructions, plain/ colour fixed with steel snap grid (powder coated bottom side) with 'T' and 'L' (25mmx30mmx1.00mm thick) section of size 600mm x 600mm placed in ceiling 'L' section fixed to wall with PVC rawal plugs and steel screws @ 600mm centre to center, including provided 5.0 mm dia galvanised bars/ wire suspended @ 1.80 mtr centre to center both sides proper hanging arrangements and maintain levels with adjustable clips complete all as specified and as directed. (Note:- If any minor electricial fittings and fixtures disturbed their-in will be match and fixed as existing).

M&L for removing any type of Grass/plants/bushes (girth n.exc 15cm of trunk of any of plants 100mm) grown along the pipes or walls chajjas, parapets and roof of building and making good the surface as per existing surfaceand pouring acid not less than 100ml for each plant in the roof to avoid further growth and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using waterproofing compound as per manufacturer's instruction and making the patch finished with painting as per surroundings complete all as specified and as directed. (Note:- Rate quoted is deemed to be included for scaffolding, saftey, measured required for working on or upto height of 20 m vertical slopes.)

Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint over red oxide primer complete all as specified and as directed.

Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and two coats of Distemper oil Emulsion on new plastered surfaces complete all as specified and as directed.

Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and two coats of cement base paint on new plastered surfaces complete all as specified and as directed.

Preparation of new plastered surfaces of walls etc. & applying three coats of lime white wash complete all as specified and as directed.

Preparation of new plastered surfaces of ceiling etc. & applying three coats of lime white wash complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each and removing from site or to store complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store complete all as specified and as directed.

Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each and removing from site or to store complete all as specified and as directed.

S&F of pressed steel framed made out of 1.25mm thick MS sheet, of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate including cement concrete (1:3:6) type C-1 as in fillings and mass concrete, filling backs of chowkats and hold fasts etc necessary form work etc complete all as specified and directed.

Ditto all as per item no 51 but of size 105x60mm Ditto-

S&F of factory made 35 mm thick plain framed, panelled shutters (two panel) with 2nd class hard wood rail and style with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F of factory made 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F of Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8/10mm square bars as directed by Engineer incharge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. (with provision of fixing for cooler if required) all as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 fixed and applying two coats of synthetic enamel paint over red oxide primer including taking down and removal of old steel windows from site or to store complete all as specified and directed. Note:- Guard bar/ grill shall be measured and paid separately under respective item of Sch 'A'.

M&L for fabrication of aluminium powder coated window any pattern & design (openable with hinges, sliding, tilt and turn, casement , fixed type, villa type, ventilators) fabricated with anodized aluminium rectangular or any type section in frame with approved design & patterns including provn of fixing galvanised mild steel wire cloth on the outer side of frame etc fixed in position complete all as specified and as directed. Note:- Glass pane & galvanised mild steel wire cloth shall be measured and paid separately under respective Items of Sch 'A'.

S&F for figured glass, pin head type ordinary quality, 4mm thick, area of each pane not exceeding 0.5Sqm and glazing with aluminium beading in aluminium frame all as specified and as directed.

S&F of sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads or fixed with rubber gasket in squares any size of pane complete all as specified & as directed.

S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed.

Mild steel round bars welded to steel windows or ventilators as in guard bars framed or unframed complete all as specified and as directed. Note:- Guard bars shall be factory welded & given one shop coat of red oxide or zinc chromate primer. Cost of factory welding & Shop coat of primer is deemed to be included in quoted rates.

S&F of factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F 150 mm long aluminium handles, cast type,anodised fixed with steel screws complete all as specified and as directed.

S&F 150 mm long aluminium anodised,barrel tower bolts of extruded section and fixed with steel screws complete all as specified and as directed.

S&F of 250 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F of mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding complete all as specified and as directed.

M&L in repair S & F 18/19mm thick factory made 100% solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 Kg/cum, manufacturer by an ISO 9001/2015 certified company complete all as specified and as directed.

S & F 45 x 70mm single rebated factory made, 100% solid WPC (wood polymer composite) Paintable door frame made from 100% lead free (Single Extruded Process) material with density not less than 780 kg/Cum complete all as specified and as directed. (a) Door frame shall be water proof, termite proof, fire retardant and having excellent screws holding capacity. (b) Rate for this item includes material and labour for fixing of frame with minimum 06 nos of hold fasts / dash through bolts of suitable size as directed.

S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised 30mm thick width of flaps (when open) complete all as specified and as directed.

S&F of hydraulic hings for kitchen cabin door shutter of mild steel bright finish or elecrogalvanised, fixede with screw etc complete all as specified and as directed.

S&F of mild steel butt hinges 100mm long, medium weight cold rolled fixed with steel chowakats etc complete all as specified and as directed.

S&F of mild steel single action helical hinges 150-200mm long, suitable for 1000-1250mm wide wooden door fixed with steel chowakats etc complete all as specified and as directed.

S&F of ball catches with 8mm dia steel ball and brass body and stiking plate incluing letting and fixed in repairs complete all as specified and as directed.

S&F of ball bearing single extension drawer slide (runner) 300-450mm clear slide and 25-30mm wide,fixed with screws etc complete all as specified and as directed.

S&F of aluminium anodised handles 100 mm long fixed to windows complete all as specified and as directed.

S&F of 50mm dia polished hard wood knobs fixed with screw complete fixed in repairs complete all as specified and as directed.

S&F in repair 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed.

Supply and fixing in repair 150mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.

Supply and fixing in repair aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified and directed.

Supply and Fixing in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing in repairs Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make : Jaguar Cat No 7771 or equivalent of Marc/ESS

Supply and fixing in repairs Mild steel window handle left/right including neccesary welding complete all as specified and directed.

Supply and fixing in repairs Mild Steel window peg stay for supporting window glass etc complete all as specified and directed.

Material and Labour for 3mm thick plain sheet glass ordinary quality including glazing with putty area n.exc 0.5 sqm in each pane including hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing complete all as specified and directed.

Supply and fixing in repair Aluminium (Die cast) body Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

Supply and fixin in repair for aluminium section of size 38x65x1.3mm thick partition wall/wall panelling fixed to wall on aluminium frame work fixed panel with 5mm thick plain glass and fixed with glazing clips rubber beading including suitable section complete all as specified and directed.

Taking down anodised aluminium door shutters, side hung or fixed type exc 1.5 sqm and n. exc 4 sqm and refixing in same opening after repairing including necessary jointing cleats, glazing clips, rubber packing, screws etc and with existing anodised aluminium snap beading, screws anodised aluminium fittings such as hinges type B-21, 125mm long anodised section complete including overhauling of floor door spring hydaulically regulated complete all as specified and directed.

S&F for decorative mild steel curtain rods 25 mm dia (powder coated) light including fixing brackets & side cups complete fixed including taking down the existing unserviceable curtain rods complete all as specified and directed

S&F of powder coated aluminium anodised deco grill weighing not less than 1.40 kg/ sqm and fixing necessary joining cleats/ frame etc complete all as specified and as directed.

Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and as directed.

Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and as directed.

Taking down 25mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and as directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

Fixing only 15mm bore steel water tubing any grade with all new fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

Fixing only 20mm bore steel water tubing any grade with all new fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

Fixing only 25mm bore steel water tubing any grade with all new fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

S&F in repair vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etccomplete all as specified and as directed.

M&L in repair vitreous china wash down water closet pan (pedestal pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube (Make of Jet 'Praayag' Cat Part No 5211 or Equivalent) incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap fixed complete and making good the disturbed portion etc complete all as specified and as directed.

S&F in repair PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc complete all as specified and as directed.

S&F in repair vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, Capacity exc 250 Ltr & n.exc 500 Ltrs etc complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, Capacity exc 500 Ltr & n.exc 1000 Ltrs etc complete all as specified and directed.

S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer in white color hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and as directed.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer in white color hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified.

S&F in repair 15mm bore chromium plated bib taps (ISI Marked), fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair pillar tap, brass, 15mm dia, with capston heads, chromium plated (ISI Marked), fancy type screwed down, high pressure, with or without lettered hot or cold, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin all as specified and as directed.

S&F in repair 15mm bore stop valve/ angle stop cock chromium plated (ISI Marked), fancy type cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe with long shank and cup complete all as specified and as directed.

S&F in repair chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union suitable for 15mm bore pipe etc complete all as specified and as directed.

S&F in repair CP greating doom 100-125mm dia complete all as specified and as directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (minimum weight for 25mm ball valves-455gms) complete all as specified and as directed.

M&L for carrying out water proofing treatment for sunken portion in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions) on top surfaces of sunken slab after preprations as mentioned above. Method of application for acrylic cementitious water proofing coating achieved as per manufacturers instruction complete all as specified and directed.

Dismantling cast iron work of any description and in any position complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc complete all as specified and as directed.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc complete all as specified and as directed.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc complete all as specified and as directed.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc complete all as specified and as directed.

S&F 100mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 75mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 100mm bore pipe cast iron cowls, complete all as specified.

S&F 75mm bore pipe cast iron cowls, complete all as specified.

M&L cast iron up to 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, 'Y' junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc complete all as specified and as directed.

M&L 100mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions complete all as specified and as directed.

M&L 75mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions complete all as specified and as directed.

S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc complete all as specified and as directed.

S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc complete all as specified and as directed.

Supply and fix Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and as directed.

S&F in repair providing precast cement concrete type B-0 1:2:4 (12.50 mm graded stone aggregate) as in louvres and jallies, 25mm thick (measured solid), including all mouldings set in CM 1:4 complete all as specified and as directed.

M &L Running welding in repairs thickness of metal to be welded exc 6mm but n.exc 9 mm thick complete all as specified and directed.

M & L Spot welding in repairs exc 2.5 cm but n. exc 5mm thickness of metal to be welded in length complete all as specified and directed.

M&L for carrying out repair dammaged RCC projections,chajja facia, roof projection facia, etc in the following stages - (i) Demolition of existings dammaged RCC projection,chajja facia, roof projection facia and similar suspended work and (reinforcement cut as required to facilitate demolition). (ii) Preparation of existing demolised portion by scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with low carbon annealed wire in hexagonal shape 1.0mm diametre chicken wire mesh of size 25mm complete. (iii) Applying 1st coat rendering of 10mm thick in CM (1:3) over demolished concrete facia/projection surfaces and allow to dry 6-8 Hrs and cured with gunny jute bag. (iv) Applying finished coat of 10mm thick rendering in CM 1:4 using 100% coarse sand over 1st coat rendered surfaces and finished surface even and smooth with using extra cement and mixed with 3% integral water proofing compound and making drip mouldings as reqiured and cured with jute gunny bag for 7 days,complete all as directed by Engr-in-Charge.. (v) Preparation of surface and applying two coats of weather coat paint over a coat of exterior wall care putty to match existing surfaces complete all as specified and as directed. The rates quoted by the bidders/Contractor shall include the following:- (a) Work carried out up to 12 Mtr in height. (b) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and all protective measures responsibilty. (c) Removal of excavated material n exc. 50m and depositing where directed by Engr-in Charge.

Taking down carefully aluminium/copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match to the existing surfaces complete all as specified and as directed.

M&L for point wiring One light/Fan/bell point/Exhaust Fan controlled by one switch one way complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FRLSH cable 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 Volts grade as earth continuity wire including sunken type pressed steel terminal boxes of suitable size with 3mm thick bakelite sheet white/coloured top cover complete all as specified and as directed.

All as per items srl No 137 above but for One socket out let 5 Amps 5 Pin on same board with other switch

All as per items srl No 137 above but for One socket out let 5 Amps 5 pin on independent board

All as per item No 137 here in before but with single core multistranded cable of size 4.0 Sqmm for one 15 Amps socket outlet on independent board and multistanded insulated copper earth continuity conductor of size 4.0 Sq mm all as specified and directed by Engr-in-Charge.

M&L for modular point wiring One light/Fan/bell point controlled by one switch one way complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, fan regulators complete all as specified and as directed.

All as per items srl No 141 above but for One socket out let 5 Amps 5 Pin on same board with other switch

All as per items srl No 141 above but for One socket out let 5 Amps 5 pin on independent board

All as per items srl No 141 above but for One light point controlled by two switch two way

All as per item No 141 here in before but with FRLS multistranded cable of size 4.0 Sqmm and multistanded insulated copper earth continuity conductor of size 4.0 Sq mm all as specified and directed by Engr-in-Charge for:- One socket outlet 15 Amp power point on Independent board.

Material and labour for Elect bell AC 230 Volts single phase musical type complete all as specified and as directed.

M&L for bell push flush type 5 Amps .

M&L for switch piano flush type 5 Amps single pole one way.

M&L for socket out let 2 in 1 multi pin 5 Amps flush type universal

M&L for switch piano15/16 Amps one way 240 volts

M&L for socket outlet 2 in 1, 3 pin, 5 and 15 Amps socket outlet 240 volts.

M&L for modular bell push 6 Amps single module

M&L for modular switch 6 Amps single module one way.

M&L for modular switch 6 Amps single module two way.

M&L for modular socket 6 Amps 5 pin double module.

M&L for modular switch 16 Amps single module

M&L for modular socket 6&16 Amps 5 pin double module.

M&L for modular Fan step regulator 120W, two module

M&L for stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as reqd complete all as specified and as directed

M&L for Ceiling rose on PVC FRLS board size 65 X 50 mm three terminal complete all as specified and as directed

M&L for Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal

M&L for Switch socket combination 2 in 1, 5 A flush type

M&L for Modular Switch socket outlet combination 3 pin 5 amp' flush type

M&L for Modular Switch socket outlet combination 3 pin, 15 amp, flush type

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps B curve type ,230 volts, 10 KA complete all as specified and as directed

Supply and fixing in repair Lamp Holder, PVC FRLS/polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in replacement of old unsv LED Tube light1 X 20 watt (04 feet), decorative ultra slim type, with integral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal complete all as specified and directed.

S&F in replacement of old unsv LED Tube light1 X 10 watt (02 feet), decorative ultra slim type, with integral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal complete all as specified and directed

S&F in replacement of old unsv LED 15 watt Environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head LED luminaire comprising of high brightness LEDs, IP54 protection complete all as specified and as directed.

S&F in replacement of old unsv LED Decorative wall light fixture made up of Polycarbonate, suitable for LED Bulb 09/12W(B-22 base) complete all as specified and as directed.

M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc complete all as specified and as directed. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length.

M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 4 Sqmm and one run of 4 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etccomplete all as specified and as directed. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length.

S&F in replacement of old unsv LED Tube light 20 watt batten emergency type with high quality materials polycarbonate and tranlucent serrated milky white diffuser to get glare free, smooth light distribution, thermoplastic aluminium housing enhance safety and luminaire is pre-wired with high effiency electronic driver and LED lamp power backup of 3 to 4 hrs including up with three core flexible copper conductor cable suitable size complete with all accessories and necessary connection complete all as specified and as directed.

S&F in replacement of old unsv LED Tube light 10 watt batten emergency type with high quality materials polycarbonate and tranlucent serrated milky white diffuser to get glare free, smooth light distribution, thermoplastic aluminium housing enhance safety and luminaire is pre-wired with high effiency electronic driver and LED lamp power backup of 3 to 4 hrs including up with three core flexible copper conductor cable suitable size complete with all accessories and necessary connection complete all as specified and as directed.

Supply, fixing, connecting & testing sheet metal enclosures double door, single pole and neutral, 08 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete including taking down existing all as specified and directed. Note : Rates are deemed to be included for flushing in wall concealed complete making good and matching existing surface.

Supply, fixing, connecting & testing sheet metal enclosures double door, single pole and neutral, 12 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating with IP-42 protection complete including taking down existing complete all as specified and as directed. Note : Rates are deemed to be included for flushing in wall concealed complete making good and matching existing surface.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

BHAKAR RAM AND SONS

M/s Ajay kumar Garge

M/S Dharam Chand Lal Chand Jain