Manufacturing and Supply of (i) Bolt and Nut of size 25 x 290 mm to RDSO Drg No. T-11524 , (ii) M.S. Bolts & Nuts of size 25 X 100 mm as per RDSO drawing No. T- 11505 (iii) Bolt and Nut of size 25 x 410 mm to RDSO Drg No. T-11536

Special Eligibility Criteria

1. 1

   i). Bulk order will be placed on the manufacturer or its authorized agent. The manufacturer firm must have satisfactorily executed at least one single purchase order for a minimum of 20 percent of the total tender quantity or multiple orders totaling to 20% or more of the tender quantity of Zonal Railways/ PUs/CORE for the tendered item [OR] for the items having same description, but of different sizes/ratings/capacities during 5 previous financial years and current financial year up to date of tender closing.Purchase Officers can consider such firms for bulk order duly keeping in view the overall performance of the firm. ii)The onus of submission of requisite documents (such as copies of Receipt note/IC for stock items, or receipt & acceptance/IC for Non- stock items, or Capacity & capability credential, M&P required for manufacturing tendered item, T&P, Technical manpower, in house testing facilities, MSE credentials etc.) along with their e-offer regarding Bulk order lies with the tenderers.

   Document requiredConfirmation required
2. 2

   iii). Only Manufacturers or their authorized dealers/ distributors need to quote with tender specfic authorization from the manufacturers failing which offer will be summarily rejected. iv). In case tenderers participates as an authorized agent, then the performance as required above shall be that of the Principal make, authorizing the agent. It may so happen that the agent has credentials of past supply for a different Principal make but this will not be considered as performance for placing bulk order in case of change of Principal make.

   Document requiredConfirmation required

Commercial-Compliance

1. 1

   In terms of clause as per Para 2.4.3 of Instructions to Tenderers for Electronic tenders ITT_Rev_1.21_April_2024 along with Correction Slip No.01 regarding Restrictions on procurement from a bidders of a country which shares a land border with India, I, hereby confirm that I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and I certify that I am not from such a country.

   Confirmation required
2. 2

   In keeping with the Public Procurement (Preference to Make in India) Order, 2017, as amended, the procurement is restricted from Class- I & Class-II sources as per Para 2.4.2 of Instructions to Tenderers for Electronic tenders ITT_Rev_1.21_April_2024 along with Correction Slip No.01. Please enter the percentage of local content in the material being offered, enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy.

   Confirmation required
3. 3

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

Other Conditions

1. 1

   Inspection by consignee.
2. 2

   Vendor must get approval for atleast one sample from ADEN/Track/FZR through consignee before supplying the bulk material.

   Confirmation required
3. 3

   [i] In terms of clause 3.0 of the Instructions to Tenderers for e-tenders, ITT_Rev_1.21_April_2024 along with Correction Slip No.01, Bidders not falling in the exempt category for furnishing EMD, are required to Mandatorily furnish the requisite EMD along with their offer, Failing which their offer will be summarily rejected. [ii] In terms of Clause 12.0 of Instructions to Tenderers for e-tenders ITT_Rev_1.21_April_2024 along with Correction Slip No.01, successful bidders unless falling in the exempt category for submission of S.D. are mandatorily required to submit Security Deposit at the rates prescribed in Para 12.4 of Instructions to Tenderers for e-tenders, ITT_Rev_1.21_April_2024 along with Correction Slip No.01.

   Confirmation required
4. 4

   Marking of Store Contractor/Manufacturer must inscribe/engrave/screen- print/emboss vendor's name/identification marks as well as month and year of manufacture on item supplied to Northern Railway as per the relevant drawing/specification/description. In case it is not stipulated in the drawing/specification/description, then the location of these identification should be such that they do not affect the functional utility and structural stability of the components/ materials, and also do not get obliterated on wear and tear. For very small items where marking on individual item is not possible, the vendor will arrange to print Vendor's name/identification marks as well as month and year of manufacture on standard packing, after obtaining specific approval from the purchaser in each case. The decision of the purchaser on whether such approval is to be granted or not shall be final and binding.

   Confirmation required
5. 5

   i]Bank Account details for the purpose of payment shall be taken as appearing in the profile of the vendor in IREPS. In case, there is any change in the bank account details, vendors are advised to update their bank account details in their IREPS profile. ii] EMD & SD to be submitted in favor of SrDFM/FZR, Northern Railway, Firozpur, Punjab, 152001.
6. 6

   GENERAL DAMAGE: In case of failure to execute the order, Action will be taken as per para 16.0 of instruction to tenderers for Electronic tenders 1.21of April 2024 along with correction slip No.01.
7. 7

   Packing Instruction: [i]Notwithstanding any packing condition stipulated in the tender documents or in the tendered drawings/specifications, it shall be the responsibility of the Contractor to appropriately pack the stores so that they are received by the consignee at destination without any loss, destruction, damage or deterioration due to any cause whatsoever. [ii]The supplier will submit the packing list for each consignment truck-wise and paste/print/paint labels on individual items mentioning the item description and reference as mentioned in packing list to facilitate ease of receipt and accountal at depot. [iii] Wherever feasible, supplier will pack items set-wise to facilitate receipt and accountal of materials. As far as possible, packing should be done in such a way that it will facilitate easy stacking and vertical space utilization. [iv] All suppliers shall ensure that the supplies including packing materials must comply Plastic Waste Management Rules 2016 and amendments thereof.

   Confirmation required
8. 8

   Warranty/Guarantee Warranty clauses as per IRS Conditions of Contract or as specified in tender schedule will be applicable. In case, there is a discrepancy regarding warranty period mentioned in specification/description and standard warranty clause as per IRS condition of contract, then warranty period mentioned in specification/description shall prevail.

   Confirmation required

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.