Construction of badminton court, tensile roofing of existing sitting tier of volleyball court and tensile roofing of existing wrestling Akhara, construction of toilet complex and RCC water sump tank at Satrayan Suchetgarh

Design, Supply, Fabrication and Erection Architectural Membrane System for custom designed to withstand the design wind pressure of 180 kg/sqmtr confirming to IS-875 part-III. (The system must pass the proof test at 1.5 times design wind pressure i.e. 285 kg/sqmtr PVDF coated fabric of the teaching width of 60mm with high frequency 20kw machine. The fabric structure shall be frame supported tensioned membrane Structure. The weight of fabric shall be Crosslinked Pvdf & Precontrant for tensile fabric work of European/ American make only 1050 GSM .The fabric shall have low elongation not more than 1.25% Characteristics under tension and shall assume an Anticiastic configuration. Structure that have designs incorporating. The fabric shall be polyester based with PVDF coating and Precontrant. The fabric shall be solvent resistant, UV resistant with 15 year warranty. The said work is to be got Executed only through specialized Agencies with Authorization Letter Specially for Said job as per instructions of engineer-in-charge, STRUCTURAL STEEL WORK Providing, Fabricating, Assembling, Hoisting, erecting and placing in position MSBuilt-up section/Tubular Structure (MS built-up section:- Rolled section & plates confirming to IS 2062, TubularStructure:- made from steel hollow section (CHS/ RHS/SHS), ISI marked conforming to IS 1161/4923, (fromTATA/ JINDAL/ Apollo OR equivalent ) in the profile shape as per conceptual drawings with special plate connector, joints,Plates, hollow sections etc. for obtaining smooth - dimensional curvature.lding process with special plate connectors, pinion joints, plates, hollow sections, including Preparation ofdetailed fabrication and erection drawings of Structural steel work from design drawings, transportation fromfabrication yard, cutting , threading, machining, leads and lifts up to all heights, tools & plants and necessary.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering . All works upto plinth level 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregates) 40 mm nominal size (crushed)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C work including straightening, cutting, bending , placing in position and binding all complete. Fe 500D or more

Supply & fixing of 40mm wide PVC strips for joints

Providing & laying PP (polypropylene ) tile approved by FIBA with minimum thickness of 15.5 mm and weight not less than 320 gm/ tile and other specification like Ball Rebound, slip resistance, force reduction as per parameters approved by FIBA. The contractor shall have to provide the unconditional warrenty of 8 years from the OEM or its Authorised Distributor in India and get the sample of tile Tested from NABL Accrediated before payment

Providing of fixing of fixed height adjustable poles (minimum 3inch) with net with line marking

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :

Centring and shuttering including strutting, propping etc. and removal of form work for Lintel, beams, plinth beams, girders, bressumers and cantilevers