RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Mobile Toilet ( 4 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Mode of Supply Assembled Ready To Use Assembled Ready To Use Number of Compartments 10-seater mobile toilet 10-seater mobile toilet Type of WC Indian with steel base Indian with steel base 1/7 Number of WC 10 10 Number of Bathrooms 0 0 Number of Urinals 0 0 Water facility By mean of overhead tank(Capacity 1200Ltrs) By mean of overhead tank(Capacity 1200Ltrs) Wash basin 2 Nos. outside the Unit with common facility 2 Nos. outside the Unit with common facility Sewage facility Sludge tank (capacity-2000ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 10-seater) Sludge tank (capacity-2000ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 10-seater) ventilation Full size cross ventilation Full size cross ventilation Top(roof) shape Slanting/tapper * Projection of Roof 50mm projection on all the four sides(slanting shape) 50mm projection on all the four sides(slanting shape) Installation and commissioning To be done by seller To be done by seller Plumbing and Sanitation fitting connections To be done by seller To be done by seller Electrical connections To be done by Consignee himself To be done by Consignee himself Waste extraction fitting To be done by Consignee himself To be done by seller
RequiredTo be done by Consignee himself Civil foundation No foundation required No foundation required TRAILER STRUCTURAL MATERIAL Trailer frame(Chassis) material with support material including pathway 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) MS angle for 4-seater/6 -seater/8-seater and 10-seater 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) MS angle for 4-seater/6 -seater/8-seater and 10-seater Railing material 38mm X 25mm MS pipe of thickness 1.2-1.5mm (for 4-seater
Required6-seater
Required38mm X 25mm MS pipe of thickness 1.2-1.5mm (for 4-seater
Required6-seater
Required2/7 8-seater & 10-seater) 8-seater & 10-seater) Trailer understructure Spring leaves 914mm with 13 leaves for 8-seater and 10-seater Spring leaves 914mm with 13 leaves for 8-seater and 10-seater Turn table/rotor 100mm X 50mm MS channel and 10mm thick MS plate plus spring ply 40mm X 5mm * Pathway passage/slide platform Sliding type made of 35 X 35 X 5mm angle iron with cross support of 25mm flat iron and top of 1.6mm aluminum chequered sheet * Stairs frame material 35mm x 35mm X 5mm MS angle and 25mm x 25mm x 3mm MS angle with 25mm x 3mm MS Flat * Stairs size 710mm X 230mm having 4-step for 1420mm Height and 735mm width stair * Locking Locking pins to be provided for lock the platform * Tow bar Made of 100 X 50 mm channel section with easy detachable and connect with turn table Made of 100 X 50 mm channel section with easy detachable and connect with turn table FRAME MATERIAL Side panel frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 6-seater/8-seater & 10-seater) 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 6-seater/8-seater & 10-seater) Top(roof) frame material 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle Top(roof) support frame structure NO top(roof) support frame NO top(roof) support frame Partition frame material NO partition frame material NO partition frame material Ventilation frame material 25mm X 25mm X 3mm(thick) flat MS * Door frame material 50mm X 25mm of 50mm X 25mm of 3/7 14-16gauge rectangular MS hollow pipe 14-16gauge rectangular MS hollow pipe Support material for Door panel fixing No support material No support material Door hinges(two numbers) 75mm size with 1.2-1.5mm thickness MS * Tank holder frame material 1125mm X 820mm outer ring(tubular structure)-MS 1125mm X 820mm outer ring(tubular structure)-MS PANEL MATERIAL Side panel material corrugated steel sheet corrugated steel sheet Top(Roof) panel material 2mm thick FRP translucent sheet 2mm thick FRP translucent sheet Door panel material Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated with necessary stiffeners (steel sheet thickness 0.6mm 275MPA) Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated with necessary stiffeners (steel sheet thickness 0.6mm 275MPA) partition panel material Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) Floor material Anti skid tile finish floor inside toilet Anti skid tile finish floor inside toilet DIMENSION Size of each cubical(LXWXH) ± 25mm 890mm X 840mm X 1980mm 890mm X 840mm X 1980mm Door size(WxH) ± 20mm 610mm X 1750mm * Ventilation size(WXH) ± 10mm 650mm X 40mm * Partition height ± 20mm 1830mm * Single pan size ± 10mm 580mm X 440mm with built in platform/footrest * Overall Length(mm) ± 25mm 5200mm for 10(5+5) seater 5200mm for 10(5+5) seater Overall Width including pathway(mm) ± 2700mm for 4/6/8 and 10-seater 2700mm for 4/6/8 and 10-seater 4/7 25mm Total height ± 25mm 3040mm * SEWAGE SUCTION UNIT Capacity of sewage suction unit N.A * Length of sewage suction unit ± 25mm N.A * Width of sewage suction unit ± 15mm N.A * Capsule Diameter N.A * Capsule Thickness N.A * Chassis size of sewage suction unit N.A * Suction pump N.A * Valve for sewage suction unit N.A * Axle for sewage suction unit N.A * Tyres for sewage suction unit N.A * Spring leaves for sewage suction unit N.A * MISC Door locking bolts Size 100mm of MS * Tower bolt locking Tower bolt of MS size 75mm * Overhead Tank material made of three layer HDPE sheet * Wash basin material made of SS 304 * WC material made of SS 304 * Towel rail/ring made of SS * Cloth hook NO cloth hook * P-trap material made of HDPE(75mm) * Footrest(WC) material made of SS 304 integrated with Indian WC and floor made of SS 304 integrated with Indian WC and floor Sewage tank material Sludge tank made of FRP 4mm(for 4-seater/6 -seater/8-seater & 10-seater) * Mirror size NO mirror NO mirror Electric provision By mean of connection from external supply * Sewage provision Connected to bio- digester * 5/7 Level indicator provision N.A * Water supply connection UPVC pipe connection with all toilet interconnecting * Seat cistern fitting NO cistern NO cistern Soap stand SS 304 made Size:125 X 75 mm * Tap material PVC push cock * Base floor surface To be suitably slanted towards WC for proper drainage(for Indian WC) * Trailer Movement facility Two axle of 57mm X 57mm X 2133mm with 4-tyres of size 7.50 X 16 with hubs and bearings for 8-seater and 10-seater Two axle of 57mm X 57mm X 2133mm with 4-tyres of size 7.50 X 16 with hubs and bearings for 8-seater and 10-seater Provision for vent pipe From sludge/Septic tank * Water mug(standard size) N.A * Electric point N.A * Stand provision to keep mobile toilet in static position To keep safe Tyre
RequiredTube
Requiredrim and their maintenance * COLOUR & FINISH Colour of cabin As per buyer's choice * Finish With Primer and Paint * CERTIFICATION Test reports to be furnished to buyer's on demand YES * OEM of offered product is ISO 9001:2015 certified YES * WARRANTY Warranty period in number of years 1 1 * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
