Deposit Work - Urgent restoration works to Thodupuzha Puliyanmala road Km. 2/050 to 2/600 and reconstruction of damaged culvert

Amount

Appendix - A Road Formation

3.6 : Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

55.4 : Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

od12452/2020_2021 : Supplying and stacking 24mm hard blue granite broken stone in standard heaps for measurement

55.2 : Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.3 : Supplying and stacking 6mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.8.a : Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

4.1.B.1 : Construction of granular sub-base by providing graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. <br> Grading-V - For sub base cum drainage layer - Mix in Place Method

5.1.a : Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

od12455/2020_2021 : Providing 40mm pre mix chipping carpet over existing black topped surface with departmental broken stones after thoroughly cleaning the existing surface with wire brushes, brass brooms and applying a tack coat of 2.5kg/10m2 and spreading the hot premix (formed of 0.32m3 of 24mm broken stone, 0.22m3 of 12mm broken stones and 22.08kg bitumen per 10m2) to template rolling to dense compact surface, then spreading the seal coat (comprising of hot premix of 0.09m3 of 6mm broken stones and 8.64kg of bitumen per 10m2) rolling again to smooth finish including cost of bitumen, oil and fuels, hire for boiler, sprayer, roller and brushes, lighting and watching etc, complete (Total usage of bitumen 33.22kg/10m2)

Appendix B- CD works

12.1.B.1 : Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. <br> Ordinary Soil - Depth upto 3m - Mechanical Means <br>

12.4 : Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.1.C : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications <br> RCC Grade M20 - Using Concrete Mixer - (Without formwork) <br>

12.8.A.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. <br> PCC Grade M15 <br>

12.8.1.C.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications <br> RCC Grade M20 - Using Concrete Mixer <br>

12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

55.16 : Providing and fixing guard post<br>Providing and fixing guard post of size 200mmx200mm, 1400mm long, 800mm above ground level and 600mm below GL. casted in M20 Grade concrete reinforced with 4 nos of 8mm dia longitudinal bars and 6mm dia stirrups @ 100mm c/c, firmly fixed in position by means of foundation of size 0.5mx0.5mx0.7m in M15 grade concrete below ground level including painting 2 coats on exposed surface with synthetic enamel paint in alternate white & black band 20cm wide

13.3 : Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications

8.8 : Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

od14765/2020_2021 : Engaging Mazdoor

M V Balakrishnan

NISHAD K.A

Bidder Name

NISHAD K.A

M V Balakrishnan

ITHIEL CONSTRUCTION