REPAIR TO ROOF SHEET WOODEN FLOORING PANELING CABINET CUP BOARD AND ROOF REPAIR OF CERTAIN BUILDINGS AT SOUTH COMPLEX AT IMA DEHRADUN

Amount

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 including demolition of brick work/stone masonary built in cement mortar complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed Note- WPC will be measured paid as supply only under respective items separetely.

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified & directed.

S&F in repair tongue & groove pine wood false ceiling using top quality pine planks with profile section 12x102mm fixed on pine wood grid of size 450mmx 450mm using section 40mmx65mm hanged with suspender from MS truss including finishing the ceiling with high gloss PU polish (Asian/berger/ICI) with gun spray after preparation of surface as per manufacturer’s specification and to the satisfaction of Engineer-in- charge complete all as specifiedd and directed. Note :- 1. MS truss & suspender shall be measured & paid in relevant item. 2. The work shall be carried out above 7.5m height.

S&F in repair tongue & groove pine wood wall panelling using top quality pine planks with profile section 12x102mm fixed on pine wood grid of size 450mmx 450mm using section 40mmx65mm fixed over wall/beam with fastner including finishing the panelling with high gloss PU polish (Asian/berger/ICI) with gun spray after preparation of surface as per manufacturer’s specification and satisfaction of Engineer-in- charge.complete all as specifiedd and directed Note :- The rate is inclusive of scaffolding upto required height and all T&P required to complete the work. 2. The work shall be carried out above 7.5m height.

Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates complete all as specified and directed.

2nd class hard as in wooden scantling clean swan fixed with nails complete including dismantling existing timber scantlings 40 sqcm and over in section in any position etc complete all as specified and directed

4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1:6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as specified and directed

Providing & fixing plain gypsum board false ceiling made out of 12.5mm thick paper reinforced gypsum board sheets fixed with main frame channel 80mmx 26mm x 0.5mm thick at every 450mm center to center, intermediate channel of size (15mm x 45mm x 0.9mm) at every 1220mm center to center with perimeter channel 20mm x 26mm x0.5mm all along the wall shall be provided. The frame work to be suspended with strap hangers 25mm x 0.5mm from intermediate channels using GI cleat & steel expansion fastnor at slab soffit Arrangements are to be made to accommodate light fixtures by forming recessed channel etc wherever directed. Depression, nails & screws, jointing & finishing shall be done with jointing compound including applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed

Pre- painted colour galvalume aluminium Zinc coating GI based corrugated tile profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed including dismantling existing sheet.

Sand witched 5mm thick PVC sheet any colour/print in wall lining/paneling fixed to wall with nail complete all as specified & directed.

Sand witched 5mm thick PVC sheet any colour/print in ceiling fixed to MS or timber frame work with nail or screws complete all as specified & directed. Note : Frame work shall be measured & paid under relevant item.

S&F sandwitched Polycarbonate coloured roof sheet of 10mm thick, including aluminium strips and rubber packing etc, fixing with screws with washers in metal frames in domes of anti rooms including dismantling of existing sheets etc, all complete all as directed.

Granite stone ( Lakha red) (table rubbed & polished) for wall lining (veneering to wall) 12-15mm thick with and including 15 mm thick rendering in CM (1:3) and jointed with grey cement slurry, and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including dismantling of existing stone slabs & cement mortar bedding and rubbish off the premises complete all as directed. Note : Any additional fittings such as clamps, screws required to hold the granite on vertical position deemed to be included in the rate.

PCC 1;4;8 type D-2, using 40 mm graded stone agg as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed.

Rubberised chequered cement concrete coloured tiles 30 cm X 30cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over & including 15 mm thick screed bed in CM 1:6 complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

Rubberised precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed.

Rubberised polished precast coloured concrete Interlocking paver block any shape,size & with grey cement & pigment colour confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed.

16 to 18mm thick “ Udaipur green” stone, as in flooring,steps, cooking platforms and like set in and including 15 mm thick screed bed in cement mortar (1:4) including pointing in colour cement 1:2 using marble dust with admixture of pigment to match with shade of stone including rounding of exposed edges of udaipur green stone and demolition of existing stone slabs including cement mortar bedding and rubbish off the premises complete all as directed.

PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, coping, benching, kneelers, apex stone, bed plates, kerbs, etc. including weathering, slightly rounded or chamfered angles and throating, including necessary from work etc including demolition of existing cement concrete complete all as directed.

25mm thick block board, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work as in shelves fix in repair complete all as specified & directed.

0.90mm thick decorative laminates type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions fix in repair complete all as specified & directed.

Teak wood lipping 6mm thick, fixed with nails to block board complete all as specified and directed.

Preparation of new wooden surfaces of any description not exc 10 Cm width or girth when unconnected with other work applying two coat of synthetic varnish over wood filler complete all as specified & directed.

MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed

12 mm thick colored pre laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in partitions, cup board shutter / shelves, pelmet box and similar items fixed in repair complete all as directed.

A coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) manufactured by authorised manufacturer specified in particular spicification, laid as per the manufacturer instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm complete including taking down existing roof treatment from RCC slab, cleaning off all foreign material by wire brushing, cleaning off surface and removal of spoil to a distance n.exc 500m complete all as directed. Note:- The work shall be executed through authorised applicator approved by GE.

Screed bed 20mm thick in CM 1:4 finished even and smooth without using extra cement on roof mixed with water proofing compound as per manufacture instruction including taking down existing screed bed (WPC shall be measure and paid separaterly) etc complete all as directed.

Preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of white wash on walls complete all as specified and directed.

Preparation of old existing varnished wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic clear varnish complete all as specified.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed

Preparation of new plastered surfaces of wall and applying two coats of weather exterior emulsion paint (Apex of Asian/Weather proof of Berger) all as specified and directed

Preparation of new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed

Preparation of new plastered surfaces of wall and applying two coats of oil bound emulsion over a coat of alkali resistant primer complete all as specified and directed

Preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) on walls complete all as directed.

Preparation of old plastered surfaces of wall/ including old corrugated sheets by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescence salts and trading oil and one coat of cement base paint (snowcem) complete all as specified.

Preparation of new steel/iron surfaces of any description, over 10 cm in width or girth and applying two coat of synthetic enamel paint with approved shade over a coat of red oxide primer complete all as specified and directed

Preparation of new wood or wood based surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint with approved shade over a coat of pink primer complete all as specified and directed

M/s caspur construction company

DHARAMVIR CONTRACTOR

Meher enterprises

Aron Water Proofing and Pest Control