Execution of preliminary work to fulfil the requirement of newly implementation of standard operating procedure SOP in respect of operation and maintenance of road/rail weighbridge in CCL command Area at Tapin North OCP, Hazaribagh Area

Steel work welded in built up sections/framed work, including cutting, hoisting, fixingin position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works for top and bottom fabrication work.

Supply & fixing of 110 W street light

Providing and fixing 63 A capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubical panel , making connections etc as required

Earthing with copper earth plate 600 mm x 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Erection of metallic pole of Above 10.00 metre and upto 12.00 metre length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Supply & fixing of 35 sq mm , 1100 V , single core Aluminium Condictor unarmoured cable

Supply & fixingof 35 sq mm Aluminium Lug

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 8.0 metre and upto 10.0 metre

Dismantling of over head lines comprising of copper/ aluminium over head conductor, Cl. wire, cross arms, insulators etc. as required.

Supplying & fixing AB Cable size 3X50+1X16+1X35 SQMM

Supplying & fixing of tension clamp (dead end) required attachment for single core cable in air with clamp,

Supplying & fixing of suspension clamp i/c required attachment for single core cable on pole with clamp, (28 x 2 nos=56)

Supplying & fixing of waterproof insulation piercing connector for aerial bunch cable i/c required attachment for single core cable in air with required size as mentioned below – Main:50-150sq.mm, tap:6-50sq.mm

Supply and fixing of Single door AB cable SMC distribution box

Supplying and erection of bow stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and also with 0.6 m long brace of size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulley fixed at one end of the brace as required.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixingin position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works for top and bottom fabrication work.

Earthing with copper earth plate 600 mm x 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required

Supply and installation of 5KVA three phase Isolation Transformer air cooled indoor type

Supply & fixing of 35 sq mm , 1100 V , single core Aluminium Condictor unarmoured cable

Supply & fixingof 35 sq mm Aluminium Lug

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information