Supply, Installation, Testing and commissioning of LT Panels duly Replacement / upgradation for improvement of power distribution system at Harbour park quarters, PCR Junction, NH Yard and Mindi junction, Officers Club h /park, Dy.Chairman Bungalow,

Amount

Supply, fixing connecting and commissioning of LT 3 phase and neutral, floor mounted, outdoor type Double door feeder pillar panel of size 1.0mtr. x 1.5 mtr x 0.6 mtr.(approx), made of 14 SWG sheet steel, with dust and various proof IP 55 protection with 2 coats of approved shade of enamel paint over one coat of red-oxide, thickness of 14 SWG comprising of following switch gear and metering devices of approved brands with suitable bus bar arrangement for 3 phase and neutral (400A rating for each phase and 200A for neutral) complete as directed by Engineer in charge including all labour tools and material. 1) Incomer: 4 pole 415 V, 50 KA, 250 A, MCCB with Thermostatic setting-1 no 2) Out goings: a) 4 pole, 415 V, 35 KA 125A,MCCB-8Nos 3 a) Panel mounted Digital Voltmeter, Ammeter 3b) LED pilot lamps 230V, 5 Nos SWITCH GEAR BRANDS : ABB/SIEMENS/ HAVELLS/ L&T / C&S/ GE/ (1162)

Supply, connecting testing and commissioning LT section Distribution box for double feeder ie., 3phase and neutral comprising 1 No- 200A incoming & 2 Nos out goings with knife switching type tin coated copper contracts for both male and female incoming & outgoing contacts duly fitted in polycarbonate box and necessary locking arrangement and fixing of the same on the wall / plinth with suitable hardware complete with all labour tools tackles and material as directed by Engineer-in-charge.(1149)

Disconnecting and removal of LT 3 phase and neutral, floor mounted, outdoor type panel and to hand over the same to General store / E/M store including transportation loading & unloading as directed by engineer in charge with all labour, tools and tackles.

Excavation of pit/trench of required width and depth in Soft / loose soil for laying of LT cable/pipe, erection of pole/strut, earth pit/stay set etc. Refilling and making the surface good to match the surroundings including removal of debris complete with all labour, tools, tackles and materials, as directed by Engineer in charge.

Excavation of pit/trench of required width and depth in Hard / Dense soil for laying of LT cable/pipe, erection of pole/strut, earth pit/stay set etc. Refilling and making the surface good to match the surroundings including removal of debris complete with all labour, tools, tackles and materials, as directed by Engineer in charge.

Supply and fabrication of steel by using suitable flats, angles, channels of required sizes to provide required cross arms, back clamps, support clamps frames for clamping of cable to existing wall cutting, bolting, riveting, drilling, welding etc. including providing one coat of zinc rich epoxy paint primer complete as directed by Engineer in charge.

Providing random rubble masonry in CM 1:5 for Construction plinth and foundations including curing, for erection of a transformers / panels as directed by Engineer in charge with all material, tools tackles

Plastering with CM 1:6, 12mm thick including racking out joints cleaning the surface curing etc., as directed by Engineer in charge with all material, tools tackles.

QUALITY ENGINEERING SERVICES

MEPF INFRA