15th FC Untied

Drilling of 165 mm dia bore well with power rig in all strata using PVC casing of 180 mm dia as per specification upto hard strata, flushing of bore well with 100 os @ 5 m interval for 15 minutes time to the vertical including C/C of all the materials etc., complete and concluding yield test at 5 m interval and collection of samples at 5 m interval to the required depth as recommended by the Geologists site plan and DTH Rig etc complete as directed by Engineer in Charge

Supply and delivery of 180 mm dia PVC casing pipe 6 kg/sqcm

Supply, Transportation and installation of 1.00 HP 15 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well.Makes: Flowell / Waterman / Ellen /Kirlosker / Narayani / Sai Varsha /Sterling / Duke / Samudra / Ajantha of 1.00 HP 15 Stage

Supply, Transportation and installation of controlpanel for single phase submersiblemotors up to 3 HP @ 220V 50Hzoperating range between 80 to 240Vincluding supply and fixing of Direct -on - Line LK / SIEMENS / CROMPTONmake Volt meter and Ammeter withstarting and running capacitorsassembled with ISI mark contactors andfitted with ISI mark MCB etc.,complete. of 1 HP

Supply, Transportation and installation of 3 Core 1.5 Sqmm Flat Copper cable of ISI for Submersible Motors. Makes : Finolex / RR Kabel / Havells / KEI / LK / Pawancab of 1.50 sqmm

BLD-CSTN-2-1 : Excavation in ordinary soils, up to 3.00 m depth below GL by Manual means: Earthwork excavation in all kinds of soil for structures as per drawings and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material , dressing of sides and bottom as per Technical Specification 305 MoRD / 304 MoRTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for constructing structures including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for Structures by manual means.

Manufacture, Supply, delivery & Installation of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc.,complete(Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 Metres.) of OD 32 mm (12.5 kg/ sqcm) (SDR 11)

Manufacture, Supply, delivery & Installation of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc.,complete(Supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 Metres.) of OD 32 mm (10.0 kg/ sqcm ) (SDR 11)

Supply, Transportation and fixing of ------------- 450 mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts. 150 mm dia galvanised bore cover

Supply, Transportation and installation of --------------- WPSC (Weather Proof Single Core) ISI mark Alluminium Wire. Makes : Polycab / GM / Million / VGuard/ Gold Medal / Kundancab / HPL / RPG / Nandicab / Nakoda / Payal /Finecab / Gemini / Vimal / Suncab / Stanjo / Rajnigandha / Orbit / Beljin / Pawancab of 6.0 Sqmm

S&F premium make CPVC Pipes of 22.20mm OD Pipe SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees,couplers, connectors, solvent cement etc., and labour charges complete including cost andconveyance of all materials to site, all operational,incidental , labour charges,etc.complete for finished item of work as directedby Engineer-in-charge of 22.20mm OD Pipe- SDR 13.5

S&F premium make CPVC Pipes of28.60mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees,couplers, connectors, solvent cement etc., and labour charges complete including cost andconveyance of all materials to site, all operational,incidental , labour charges,etc.complete for finished item of work as directedby Engineer-in-charge of 28.60mm OD Pipe- SDR 13.5

Providing & Placing on Terrace (at all floor levels)polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931

Supply, fabrication errection & fixing in position of MS tubular trusses including cost and conveyance of all material and all labour chages etc complete.

Supply and fixing of 25mm PPR Ball Valve conforming to DIN Standards 8077/8092.

Supply and Fixing of 40mm PPR Ball Valve conforming to DIN Standards 8077/8092