Construction of Box Culvert on Boriya Mata Faliya Road (VR) at Chainage 1/400 to 1/500 Ta. Shahera Dist. Panchmahal

Name Of Work :- Construction of Box Culvert on Boriya Mata Faliya Road (VR) at Chainage 1/400 to 1/500 Ta. Shahera

Dist. Panchmahal

1 Construction of Box Culvert on Boriya Mata Faliya Road (VR) at Chainage 1/400 to 1/500 Ta. Shahera Dist. Panchmahal

Bill of Quantities

Item of work Quantities Rate in Amount

Estimated Unit Figures in

1 Clearing and grubbing of road length including up rooting wild vegetation, grass, 0.13 Hectar 28393.04

bush shurbs, saplings and trees of girth up to 300 mm removal of stumps, of such e

trees cut earlier and disposal of unserviceable material and stacking of serviceable

material (area of light density) by mechanical means in area of light jungle

2 Providing, laying and Spreading Granular sub-base (Grade-I) by providing close 200.00 Cum 1085.75

graded MCBT. material in single layer with motor graderon prepared surface,

mixing by mix in place method with rotovator at OMC and compacted

withvibratory roller 80 to 110 KN static weight to achieve desire density etc

3 Providing and laying compacted WBM of Grading-I MCBT metal of size 63 mm 45.00 Cum 1405.92

to 45 mm in required layers including using 16% stone screening 13.2 mm size

and 8% stone dust as filler including spreading watering & consolidation by

vibratory roller etc. as per MoRTH Specification compelete as directed by

Engineer - in - Charge.

4 Providing and laying compacted WBM of Grading-II MCBT metal of size 53 to 89.00 Cum 1507.93

22.4 mm in required layers including using 24% stone screening 11.2 mm size

and 8% stone dust as filler including spreading watering & consolidation by

vibratory roller etc. as per MoRTH Specification compelete as directed by

Engineer - in - Charge.

5 Providing and laying 100 mm Compacted of Specified quarry Spall in side 48.00 Cum 819.11

shoulder including carraige of material and spreading on prepared base including

compacting as per MOST Specification etc... complete.

6 Earthwork in cutting in all sorts of soil and soft murrum including conveying and 27.00 Cum 127.75

putting the stuff in spoil bank maintaining minimum distance of five meter

between top edge and cutting and toe of spoil bank.

7 Earthwork for embankment including breaking clods, dressing with all lead and 1499.00 Cum 158.62

lift and including watering rolling and consolidation of subgrade in layers at

O.M.C. to required dry density including filling the depression which occur

during the process using power roller 8T to 10T. From Borrow area within all

8 Providing and laying Prime coat with Bitumen emulsion (SS-1) at the rate of 7.50 814.00 Sq.mt 93.23

Kg / 10 Sq.M. on the prepare bituminous surface etc complete as directed with

all labour and materials

9 Providing and laying Tack coat with Bitumen emulsion (RS-1) at the rate of 2.50 1178.00 Sq.mt 19.90

Kg / 10 Sq.M. on the prepare bituminous surface etc complete as directed with

all labour and materials

10 Providing & laying Bituminous grout 37.50 mm thick with asphalt of grade of 46.00 MT. 2905.77

VG-30 at the rate of1.99% by weight of mix for mixing using B.T.Chips of

required gradation including cleaning and heating asphalt premix materials by hot

mix process in proper gradation and laying with paver finisher and consolidation

by roller of 8 to 10 tonnes including cost of all materials, Asphalt,aggregates,

labour Charges,royalty charges etc.completed as directed. including flushing key

aggregate @0.13 Cum/10 Sq.m.

01.Sch B Boxculvert on Boriya Mata F Halol Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

11 Providing laying and rolling 25 mm thick open graded premixed bitumineous 44.00 MT. 3775.38

carpet with B.T. aggregate as specified and using bitumen grade VG-30 for

mixing with agreegate at the rate of 3.36 % i.e 33.60 kg/M.T. of total mix

including heating and mixing in drum mix plant and spreading the same with

paver finisher and consolidation with power roller including necessary firewood,

oil, lubricants, labour charges etc. using contractor's own drum mix plant and

equipment, tool etc. completed in accordance with the requirement of

12 Providing & laying Bitumen seal coat with 0.18 Cmt/ 10 Smt. of stone chips 24.00 M.T 4605.60

6mm size & binder grade VG-30 content at the rate of 4.50 % by total weight of

mix . Hot mix laying process is including heating the asphalt aggregate

continuous batching, transporting the mix and spreading the same by paver

finisher & consolidation with power roller including providing necessary fire

wood, oil, lubricant, labour charges, higher charges of machinery etc, complete.

13 Citizen' s information Board- Providing and fixing of typical information board 1.00 Nos. 22562.39

as per instruction. Two MS plates of 1.6 mm thick, of 900 mm x 750mm size

fixed at top & bottom duly welded with MS angles of 25 x 25 x 5 mm thick M.S

plate shall be welded by two vertical M.S flats & four horizontal M.S flates 5 mm

thick to 75 mm x 75 mm of 12 SWG square tubes posts duly embedded in cement

concrete M-15 grade blocks of 600mm x 600mm x 750 mm, below ground level.

Painting New letters & figure of any shade with ready mixed synthetic enample

paint of superior quality in required shade and colour, All sections of framed

posts and steel tube will be painted with primer and two coats of epoxy paints as

per detailed drawing

14 Supply & fixing logo board of MMGSY diamond size (600 X 600mm) 16 gauge 2.00 Nos. 4096.56

& board plate size (900x 250mm) 16 gauge thick M. S plate and 2.40 meter deep

length single angle 75x 75x 6 mm size including fitting and painting lettering with

luminous colour as per drawing etc

15 Road marking with hot applied thermoplastic paints with reflectorising glass 38.00 Sq.mt 367.73

beads on bitumin surface providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm

area, thickness of 2.5mm is excluding of surface applied glass beads as per

IRC:35-2015. The finished surface to be level, uniform and free from streaks and

holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white

colour marking should provide liminance coefficinet on cement road shalll be min

130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity

should be two years.

16 Regulatory/Mandatory signs :Providing and fixing sing boards made out of 2mm 8.00 Nos. 3439.81

aluminium sheet; size 60cms. diameter circle as per the design of IRC-67-1977

pre treated with phospheting process & acid eteching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as

required; painted with best quality epoxy coatings in black and white bends. the

details of symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for

each leg. including excavation curing etc. complete under the supervision of

engineer in charge.(A) Engineer Grade(VR)...

01.Sch B Boxculvert on Boriya Mata F Halol Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

17 Chevron sign :-Providing and fixing sign boards made out of 1.5mm aluminium 6.00 Nos. 3711.75

sheet / 3mm ACP (Aluminum composite Panel); size 60x50cm rectangular as per

design of IRC-67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro refiectivesheeting of Type-

4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.3 mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of35x35x3mm; painted with

bestquality epoxy coatings in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be submitted by contractor.

(A) Class-B Type-4 Retro Reflective sheeting

18 Around the Island/road direction sign board (Big) :-Providing & Fixing sign 2.00 Nos. 6798.92

boards made out of 2mm aluminium sheet, size 180 x 60 cms rectanglel as per

the attached drawing pre treated with phospheting process & acid etching. coated

with one coat of epoxy priemr and two coats of best quality epoxy paint

reflectorised with retro reflective sheeting as per latest M.O.S.T. 3.1m long

(2nos) stand post and frame fabricated from iron angle of 50x50x5mm, painted

with best quality epoxy coating the fixing at site shall be in 1:2:4 CC block of

size 45 x 45x 60cms for each leg, including excavation curing etc. complete under

the supervision of engineer in charge.(A) Engineer Grade(VR)...

19 Men at work (Heavy) sign :-Providing and fixing sing boards made out of 2mm 2.00 Nos. 6141.21

aluminium sheet; size 120 x 90cms. rectangle as as per the attached drawing. pre

treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T. Specifications; Letters and numerals

should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm painted with best quality epoxy

coatings in black and white bends. the details of symbol or inscription / numerals

for each board shall be as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

20 Danger Plate Sign :-Providing & fixing sign board made out of 2mm aluminium 2.00 Nos. 456.56

sheet, size 30cms diameter circle, pretreated with phospheting process and acid

etching, painted with one coat of epoxy primer and two coats of best quality

epoxy paint reflectorised with retro reflective sheeting as per latest M.O.S.T.

specifications (As per attached draiwng)(A) Engineer Grade(VR)...

01.Sch B Boxculvert on Boriya Mata F Halol Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

21 Diversion sing board :-Providing & Fixing sign boards made out of 2mm 2.00 Nos. 6798.92

aluminium sheet, size 180 x 60 cms. rectangle as per the attached drawing pre

treated with phospheting process & acid etching. coated with one coat of epoxy

priemr and two coats of best quality epoxy paint reflectorised with retro reflective

sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as

per IRC-30-1968,3.1m long (2nos) stand post and frame fabricated from iron

angle of 35x35x3mm, 50x50x5mm painted with best quality epoxy coatings in

blak and white bends. The fixing at site shall be in 1:2:4 CC block of size 45 x

45x 60cms for each leg, including excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineer Grade(VR)...

22 Flexible Median Marker : Providing and Fixing of Flexible Median Marker that 26.00 Nos. 271.69

are made of tough, high impact resistant, injection-moulded, thermoplastic body

with property of flexibility to provide high durability. The dimension of Flexible

Median Marker should not exceed 18.4 cm in height(including shank height),12.5

Cm in width. ,0.65 cm in thickness and shank depth shall be 3.4 cm The body

structure shall be rounded at all its corners and edges. The plastic used for

molding the Flexible Median Marker should survive impact load of 5kg

continuously for 750 times at room temperature. The logo of the manufacturer

shall be embossed on either side of the body in the injection molding process. The

Median Marker shall have flame like shaped body with, fluorescent yellow color

retro-reflective sheeting of size not less than 90 Cm square, with fully reflective

micro prismatic cube corners as its retro-reflective elements as per IRC 67

and ASTM D4956-09 type XI specifications reflectivity values. The retro-

reflective sheeting shall be one or both sides of the Flexible Median Marker and

shall be edge protected with no exposed edges which will prevent edge lifting,

vandalism, sheeting damage, etc. The Flexible Median Marker shall be fixed by a

combination of epoxy adhesive and grouting as recommended by manufacturer

and Engineer in charge.

23 Hazard Marker Sign :-Providing and fixing sing boards made out of 2mm 4.00 Nos. 2423.74

aluminium sheet; size 90 x 30cms. rectangle as as per the design/drawing

attached (IRC) pretreated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised

with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long

stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm &

50 x 50 x 5mm painted with best quality epoxy coatings The fixing at site shall

be in 1:2:4 CC block of size 45x45x 60cms. for each leg. including

excavation curing etc. complete under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

24 Cautionary Warning Sign :-Providing and fixing sing boards made out of 2mm 10.00 Nos. 3722.36

aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-

67-1977. Pre treated with phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with

retro refiectivesheeting as per latest M.O.S.T.Specifications; 3.1m long stand

postand frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm, 75 x

x 6mm as required; painted with bestquality epoxy coatings in black andwhite

bends. The details of symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg.including excavation, curing etc.complete under the

supervision of engineer in charge.(A) Engineer Grade(VR)

01.Sch B Boxculvert on Boriya Mata F Halol Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

25 Cat Eye / Road Stud / RPM: Supplying of Raised Pavement Markers made of 23.00 Nos. 217.41

polycarbonate and ABS moulded body and reflective panels with Micro prismatic

lens (No Glass bead lens) capable of providing total internal reflection of the light

entering the lens face and shall support a load of 13635 kgs. tested in accordance

to ASTM D 4280 Type H and complying to Specifications of Category A of

MORTH Circular No RW/NH/33023/10-97 - DO III Dt 11.06. 1997. The height,

width and length shall not exceed 20 mm, 130 mm and 130 mm and with

minimum reflective area of 13 Sqcm on each side and the slope to the base shall

be 35 +/- 5 degree. The body of the marker should having finger grip for easy

and accurate placement and application with epoxy / bituminous Adhesive as

recommended by the manufacturer of the marker. The colour of the marker

should be as per the IRC 35-2015 and as directed by Engineer-in-charge.

26 Excavation for foundation in hard murrum and boulders and very stiff or sticky, 712.00 Cum 582.22

clays and other similar strata including shoring and strutting and dewatering as

necessary and disposing of the excavated stuff as directed .

27 Providing and filling in foundation with ordinary Cement concrete M‐150 mix 129.00 Cum 3582.47

and providing necessary vertical pin headers including formwork, vibrating,

ramming and curing complete.

28 Providing and casting in situ Ordinary cement concrete M-150 for R.C.C. Raft 175.00 Cum 3586.18

and cut-off walls including necessary shuttering laying, vibrating, ramming and

curing complete.

29 Providing and casting in situ ordinary cement concrete M-200 mix and 241.00 Cum 4155.14

providing necessary pin headers including shuttering, scaffolding, laying,

vibrating, curing and finishing complete without V-Groves. (A) Height from

30 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with 60.00 Meter 4685.19

collars for culverts including setting and joining the pipes in C.M. 1:2 watering

and laying (To level of slops of I.S. 458 / 1971 Class NP4 of following internal

diameter. (iv) 900 mm dia.

31 Providing and laying in position FE 500D TMT bar reinforcement including 41.38 M.T 73217.53

cutting, bending, hooking and tying complete as per detailed drawings for the

following.(A) Piers (B) Abutments (C) R.C.C. Returns

32 Providing and casting in situ Controlled cement concrete M-250 for R.C.C. Raft 161.00 Cum 4493.49

and cut-off walls including necessary shuttering laying, vibrating, ramming and

curing complete.

33 Providing and casting in situ Controlled cement concrete M-250 mix and 86.00 Cum 4261.19

providing necessary pin headers including shuttering, scaffolding, laying

vibrating, curing and finishing etc., complete without grooves(Height from 0.0 to

34 Providing and casting in situ controlled cement concrete M-250 for R.C.C. 119.00 Cum 5537.83

solid slab including centering, scaffolding, curing and finishing complete.

35 Providing and casting in situ controlled cement concrete M-250 for 21.00 Cum 5032.83

Approach slab including form work curing and finishing complete.

36 Providing and Casting in situ controlled cement concrete M-250 for average 100 39.00 Cum 5175.24

mm thick Wearing Coat laid as directed including tempering, Vibrating,

finishing,curing and filling in joints with bituminious complete .

37 Providing and filling sand behind abutment & between returns in layers as 229.00 Cum 445.41

38 Providing and laying weep hole in Aburtments, and returns by using A.C. pipe 158.00 No. 45.82

of 100mm including laying in proper grede and jointing the completed as per

detailed specification.

39 Providing and laying filter Media 600mm thick directed at the back of abutments, 158.00 Sq.mt 1180.34

returns and wing walls as per detailed specifications.

01.Sch B Boxculvert on Boriya Mata F Halol Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

40 Providing PVC 100mm diameter water spouts including necessary iron 20.00 No. 159.37

gratings as per drawings.

41 Providing 12 mm thick pre moulded asphalt filler joints as per drawings. 11.00 Sq.mt 702.13

42 Reinforced Cement Concrete Crash Barrier (Provision of an Reinforced cement 97.00 Rmt 1380.67

concrete crash barrier at the edges of the road, approaches to bridge structures

and medians, constructed with M-25 grade concrete with HYSD reinforcement

conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion

joints filled with pre-moulded asphalt filler board, keyed to the structure on which

it is built and installed as per design given in the enclosure to MOST circular No.

RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the

approved drawing and at locations directed by the Engineer, all as specified (i) M

25 Grade Concrete.

43 Dismentaling the existing structure including removing and stacking the 119.00 Cum 886.06

dismentelled materials as and where directed. (A) R.C.C. work

Credit For Diversion

Rupees Ninety Eight Lakh(s) Twenty One Thousand Three Hundred Forty Two And Paise Seventy Four

I / We am / are willing to carryout the work at ………..% above/Below percent (………………………. Percent above/Below)

(Should be written in figure and words) of the estimated rates mentioned above. Amount of my / our tender worked out as

Estimated amount put to tender Rs: ……………. Estimated amount put to tender Rs: …………...

Deduct……% below Rs: …………………………. Add……% above Rs: ………………………….…

(Please strike out which ever is not applicable.)

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 Credit of Dismentalled /Reuse materils amounting of Rs. 350771.11 Must be fully recovered from respective 1st R.A. Bill Of Contractor's.

Quantities rate and wordings of items are as per estimate and calculation in the Sch. - B are airthmatically checked.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Sr.Divisional Account Officer Dy.Executive Engineer

Panchayat (R & B) Division Panchyat (R & B) Sub Division

Signaturre of contractor Executive Engineer

with seal Panchayat (R & B) Division

01.Sch B Boxculvert on Boriya Mata F Halol Page