Renewal of Sisaiya Dhaurahra Nighasan Palia Dhanauraghat Puranpur road (SH-101) Km.-104(750) For B.C. work.

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Executive Engineer, C.D.-3, P.W.D.Lakhimpur kheri

Name of Work: Renewal of Sisaiya-Dhaurahra-Nighasan-Palia-Dhanauraghat-Puranpur road (SH-101) Km.-104(750) For B.C. work.

Contract No: 154/e-Tender/2026 Dated 31.01.2026

Item Description Item Code / Make Quantity Units Estimated Rate UNIT Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface Sqm Excess(+) Full Conversion INR

2 Providing and applying tack coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. but including cost of Bitumen. Sqm Excess(+) Full Conversion INR

3 Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects but including cost of Bitumen. Cum Excess(+) Full Conversion INR

4 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Cum Excess(+) Full Conversion INR

5 P/L of hot applied thermo plastic compound 2.5 mm thick including reflecto rising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass breads as per IRC 35.The finished surface to be level uniform & free from streaks and holes As per MORTH-803(8.13) Sqm Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information