UPGADATION OF QC OFFICE , EXISTING NDT AND METROLOGY LAB .AT HAL, BARRACKPORE

Dismantling of existing/damaged concrete of any description and in position including disposal of unserviceable material etc. complete as directed by EIC.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Dismantling of exising aluminium partion, false ceiling with frame of any description disposal of unserviceable material and stacking of serviceable material etc. complete as directed by EIC.

Removal of old damaged plaster (any thickness) including racking, hacking, chipping & scrubbing carefully without causing any damage to the surroundings etc. complete as directed by EIC.

Taking down of steel/Wooden windows/doors/ventilators shutter of any desciption including frame (if required) and dispose the same in salvage yard etc. complete as direcetd by EIC.

Dismantling of existing/damaged tile work of any description etc. complete as directed by EIC.

Providing and laying cement concrete (1:2:4:) with 20 mm graded stone aggregate in floor, cloumn, beam, wall etc. excluding shuttering and reinforcement etc. complete as directed by EIC.

Brick work with sub-class 'B' brick in cement mortar (1:4), in super structure, straight or curved on plan exceeding 6m mean radius as per direction of Engineer-in-Charge.

Supplying and applying water proofing compound etc. complete as directed by EIC.

Providing, rendering and plastering 15 mm th. (av.) in cement mortar 1:4 on brick/ concrete surface work including finishing to an even and smooth surface including materials, transportation, curing scaffolding etc. all complete as directed by EIC.

Reinforcement steel for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding etc. all complete, TMT Bars of all diameter etc. complete as directed by EIC.

Providing & laying R.C.C. 1 : 1 1/2 : 3 (20 mm graded aggregates) slabs, column, beam, lintel etc. excluding shuttering and reinforcement etc. Complete as per direction of EIC.

Providing formwork for slab, beam, lintel, chhajja etc. including strutting, propping for support etc. and removel of formwork etc. Complete as directed by EIC.

Steel work welded in built up sections/ framed work including use of chequered plate, cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. complete as directed by EIC.

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Double charge vitrified tile polished finish of size 600MMx600MM (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete as directed by EIC.

Supplying and fixing of decorative polished colour paver tiles of approved decorative shape and size of not less than 22mm thick including providing screeding of 15 mm in cement mortar 1:6, laying tiles in neat cement slurry, pointing with white cement mixed with matching colour pigment, cleaning the surface, curing etc. complete as directed by EIC.

Providing and applying of two coat of approved Premium Acrylic Smooth exterior paint with Silicone additives of required shade to exterior surfaces of walls with one coat of approved external primer incluing preparation of existing surface, cleaning, scaffolding, curing etc. complete as directed by EIC.

Providing and applying plaster of paris putty not less than 1 mm thickness over plastered surface to match with exisiting surfaces and prepare the surface even and smooth including one coat of approved primer complete removal of existing treatment on wall and ceiling (if any), cleaning, scaffolding, curing etc. complete as directed by EIC.

Providing and applying of two coat of approved premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture including necessary preparation, cleaning, scaffolding etc. complete as directed by EIC.

Providing and applying two coat of Synthetic Enamal paint with one coat of approved primer on wooden/concrete/steel surfaces including necessary preparation, cleaning, scaffolding etc. complete as directed by EIC.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, locks, handle etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required, handle, lock etc. complete as directed by EIC.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge

Providing and fixing glazing panes of 5 mm thickness in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

Supplying and fixing of Second class teak wood for plain, solid, straight frames chowkat etc. complete as directed by EIC.

Providing and fixing ISI marked 30 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including Stainless Steel butt hinges with necessary screws etc. complete as directed by EIC.

Supplying and fixing of Brass handles, cast type, polished bright of 150mm size complete as directed by EIC.

Supplying and fixing of A Brass barrel tower bolt, with cast or sheet battel and rolled of size 200mm and fixed in doors with screw etc. complete as directed by EIC.

Supplying and fixing of steel sliding door bolt of size 200mm and fixed in doors with screw etc. complete as directed by EIC.

Supplying and fixing of door stopper brass body of 140mm length and tongue with hard drawn steel spring etc. complete as directed by EIC.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer- in-charge

Providing and fixing 16mm thick mineral fibre false ceiling tiles at all heights of size 595X595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8 mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. Note : length of GI wire may vary as per site contions and the quote should be inclusive of all)

Providing and fixing 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand fixed over wall for panelling work including necessary frame work, screws, rebate, decorative PVC beading etc. complete as directed by EIC.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink size 610x460 mm bowl depth 200 mm or equivalent as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required etc. complete as directed by EIC.

Providing and fixing C.P. brass long nose bib cock of size 15 mm nominal bore of approved quality conforming to IS standards and weighing not less than 810 gms etc. complete as directed by EIC.

Supplying and applying of Linoleum/PVC flooring wood grain coloured or colour specified by EIC of thickness not less than 3mm thick sheet, sealed down with an approved adhesive in floors including stretching, cutting and fitting, removal of existing damaged sheet, preparation of surface etc. complete as directed by EIC.

HAL/BKP/NIT/CIVIL/658/2024 Date: 31-12-2024

UPGRADATION OF QC OFFICE, EXISTING NDT & METROLOGY LAB AT HAL BARRACKPORE (UNDER RISK & COST).

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Goods & Service Tax Registration No

Format of Undertaking

PAN No.:

Electrical Licence.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rupees

Enclosed

Enclosed

Enclosed

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to e-procurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice.

Pls Enter Details of 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

40% (Three Works)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION :

Pls Accept The Declaration

DECLARATION II

Pls Accept the Delaration II