8466/E8 COMPREHENSIVE MAINTENANCE TO CERTAIN OTM BUILDING AND OTHER MISC WORKS AT MAJOR AND MINOR UNITS OF INCLUDING ZONE A AND B AT MIL STN SHAHJAHANPUR UNDER GE (EAST) BAREILLY

Amount

S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from steel frames.

M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified.

S&F in repair 15mm bore chromium plated Bib taps cast copper alloy screwed down , screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm dia angle valve cast copper alloy, chromium plated with long shank and cup (concealed type) including making surface good with cement mortar 1:4 complete all as specified and directed.

S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 350 mm x 250 mm x 7 mm/450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement including 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L for providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed.

M&L for vitrified light shade colored ceramic tiles 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick screed bed in CM 1:4 complete complete all as specified and as directed.

M&L for 18-20 mm thick machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed.

M&L for 18-20 mm thick machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick screed bed in CM 1:4 complete complete all as specified and as directed.

M&L for granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types over 15mm thick screed bed in CM 1:4 complete..

Dismantling Asbestos Cement/CGI (Corrugated, Semi corrugated etc.)/galvalume sheets in roof coverings complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, as specified.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified.

S & F of framed brackets of angles or tees with web and flanges, ms sheet cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. conforming to Fe.290.Gde-E-165

S & F of anodised aluminium snap grid frame work for false ceiling all as specified in SSR Part-I including Hangers 3 mm dia GI wire (upto 1200 mm in length) adjusting levels fixed to roof slabs/truss/purlin by ceiling cleats made of GI flat 40 x 3 mm size 60 mm long complete. The main and cross tees shall be joined at Junction/crossing with anodised aluminium angle bracket 15mmx15mmx1.50mm weighing 0.12 Kg per running meter. The snap grid shall be supported at the eand along the wall with anodized aluminium angle of size 40mmx25mmx2.00mm weighing 0.36 Kg/Rm.

S & F of exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately)

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets as specified and directed

Removing existing water proofing treatment including plaster & PCC bedding layer if any and preparing surfaces to the entire satisfaction of Engineer-in-Charge / GE including taking down existing plaster, cleaning of all foreign material such as grass, roots, dust etc and roughening the concrete surfaces by wire brushing and washing down to remove dust etc. flushing at junction of parapets complete and removing the same to the places where directed by Engineer-in-Charge

M&L for rendering 10mm thick plaster in CM 1:4 with WPC on roof surfaces over PCC surfaces complete all as specified and direcetd.

Supply only liquid water proofing compound

M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqm supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction complete all as specified and directed.

M&L for one coat of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed.

M& L for one coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of primer and 1 mm putty complete all as specified and directed.

M&L preparation of old decorated surfaces & applying one coat of oil bound distemper on ceiling complete all as specified and directed.

M&L preparing Old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and direcetd.

M&L for preparing of old painted wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paints all as specified & directed by the Engr-in-Charge.

M&L for preparing of old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified & directed.

M&L for preparing of old AC sheet surface by brooming down with steel wire brushing and washing with water and applying one coat of acyrlic emulsion exterior paint any colour, complete all as specified.

Attending plumbing complaints only fixing item in repair and rectify defects i.e. flushing leakage from down pipe, flush handle , PVC connection, stop valves, leakage of bib taps, wall mixer, basin mixer, stop/angle cock, pipe line leakages, float valve, tank replacement etc including provision of all types of washers , thread , rubber cone, M-Seal, Spindle for Bib tap/Stop cock with necessary tools & plant and made functional to entire satisfaction complete all as specified and directed .

Attending carpenter complaints only fixing item in repairs and rectify defects i.e. tightening of loose door/window/cupboard hinges and refixing of loose sliding bolts/tower bolts/handles, refixing of loose pelmet & curtain rod /brackets, easing of doors/windows/cup boards and repair in same position including providing all type of screws, nails, timber beading, fevicol and necessary small items as per site requirement with necessary tools & plants and made functional to entire satisfaction complete all as specified and directed .

Supply only 15mm GI nipple of any size for fitting of tanks, certain plumbing works for day to day complaints complete all as specified and directed.

Supply only nails (Standard Blind Rivet) in any size and description for day to day complaints complete all as specified and directed.

Supply only screws and Nylon plug in any size and description for day to day complaints complete all as specified and directed.

Supply only valve & washer (Jamper valve) for repair of Brass Bib Cock in any size and description for day to day complaints complete all as specified and directed.

Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete.

M&L for Rendering 15 mm thick in ready mixed cement water 1:4 on fair faces of brick masonry or concrete surfaces of wall upto 3 storey height mixed with water proffing compound (ISI Marked) @3% by weight of cement or as per manufacture insturctions, finished even and fair complete all as specified and directed after applying one coat of smart care damp guard /block 2K of make : - Asian paints/ Dr Fixit or equivalent as approved by GE.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement incl WPC 3% by weight of cement or as per manufacture instruction complete all as specified and directed

M&L rendering 15mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F, 200 mm long stainless steel barrel tower bolts and fixed as specified and as directed.

S&F 100 mm long medium weight (min 2.00 mm thick) butt hinges, stainless steel with stainless steel hinge pin, complete and fixed in position as directed.

S&F 150 mm long stainless steel grade 304 handles oval type medium weight (min 3.00 mm thick) complete

S&F aluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 80x44x1.98mm thick with rawl plug (b) Middle and lock rail : 150x44x1.98mm thick (c) Bottom rail : 150x44x1.98mm thick (d) Top rail/sype : 85x44x1.98mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer ( Make Sandhu ISI marked or ites equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F aluminium anodised sliding windows ,shutter glazing with and including 4.8 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips , frame, with duco pattern grill of size 75 mm X 75 mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slids . Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F aluminium anodised windows, ventiletators frame with side hung shutters and glazing with and including 3.8 mm thick tinted glass fixed with rubber gasket with aluminium beading ,clips, frame made with aluminium section as appended below :- (i) Frame :65X40X1.98 mm thick (ii) Top/bottom rail and style /rail of shutter : 44X47X1.98 mm thick (iii) Aluminium beading - 0.7 mm thick (iv) Aluminium fitting such as peg stay,aluminium hinges,aluminium handle 100 mm long,aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed

S & F 250 mm long stainless steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 16mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

Taking down carefully aluminum, light, fan, socket or power point complete including unserviceable fittings such as switches ceiling roses, pendants, regulators, sockets etc at site and making good the disturbed surfaces of walls, floors filling up of holes, plastering white washing distempering etc matching to the existing etc.

M&L for point wiring for one light/fan, bell/ buzzer point controlled by one switch with cable 1.5 Sqmm size PVC insulated (unsheathed) 1100 volts grade single core stranded (multistrand) copper conductor FRLS cable and drawing in and including non metallic rigid PVC concealed conduit medium grade inclusive of conduit fittings such as Bends Teess reducers etc and galvanized iron sheet steel terminal boxes/modular flush boxes of size 16 gauge thickness, light switches sockets with 3mm thick bakelite laminated sheet brass screws and cup washers including one continuous run of 1.50 Sqmm nominal area PVC insulated unsheathed 1100 Volts grade single core FRLS cable with solid copper conductor green in colour with wire and connecting to earth dolly complete.

All as per Item Ser No 60 above but for One light / Fan point controlled by one way switch complete all as specified and directed.

All as per Item Ser No 60 above but for One Bell /Buzzer point controlled by one way switch complete all as specified and directed.

All as per Item Ser No 60 above but for One 3/5 pin 5 Amps socket outlet on independent board complete all as specified and directed.

All as per Item Ser No 60 above but for One 3/5 pin 5 Amps socket outlet on same board complete all as specified and directed.

All as per item Ser No.60 here in before but with using copper conductor of 2.5 Sqmm for one 3/5 pin socket outlet 15 Amps on independent and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

Supply and fixing in replacement switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed.

Supply and fixing in replacement socket out let sefty shutter 5 pin 5 Ampsflus type all as specified and directed.

Supply and fix in replacement bell push flush type 5 Amps complete all as specified and directed.

Supply and fixing in replacement switch piano flush type one way 15 Amps SP complete all as specified.

Supply and fixing in replacement socket outlet polycarbonate 2 in 1 , 3 pin 5 / 15 Amps flush type complete all as specified and directed.

S& F in replacement swicth flush type 5 Amps single pole two way all as specified and directed.

S&F in replacement switch modular flush button single pole one way 15 Amp complete.

S&F socket in replacement out let 3 pin 5/15 Amp multipurpose, modular flush type 240 volt complete.

M & L for replacement of Step fan regulator modular type for ceiling fan of any sweep complete all as specified and directed by Engr-in-Charge.

S&F in replacement ceiling rose 3 terminals PVC / Polycarbonate insulated body 65mmx 50mm size complete all as spcified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp/ offwhite suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holderconnecting up with three core flexible copper conductor cable of suitable size.

Supply and fix Modular White cover plates with frame 8 Module complete all as specified and directed by Engr-in-Charge.

Supply and fix Modular White cover plates with frame 6 Module complete all as specified and directed by Engr-in-Charge.

Supply and fix Modular White cover plates with frame 4 Module complete all as specified and directed by Engr-in-Charge.

Supply and fix Modular White cover plates with frame 3 Module complete all as specified and directed by Engr-in-Charge.

Supply and fix Modular White cover plates with frame 2 Module complete all as specified and directed by Engr-in-Charge.

Supply and fix recess mounting LED driver luminar suitable for 36 to 100 watts complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC 4 feet decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceilingrose complete all as specified by Engr-In-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V ACdecorative type with driver holder and LED lampincluding connecting up with three core flexiblecopper conductor cable of suitable size complete.

Suppply and fixing submain wiring with using two single core 6.0 SQmm copper multy stranded conductor PVC insulated and unsheathed (FRLS) cable and one single core 6.0 Sqmm copper multistandred conductor PVC insulated and unsheathed (FRLS) Earth wire using ISI MArked IS 694 1100 volts grade PVC insulated flexible stranded copper conductor wire drawn through with and including medium grade concealed PV C conduit ISI marked not less than 25 mm dia including conduit fitting and accessories complete including cutting cheses in existing wall of any descirption buiolt in ccement mortor and making good the disturbed surfaces in cement mortor (1:4) and finishing the surfaces to match with existing surfaces and finish termonatioin with bottle type copper lugs conduit being laid either in ceiling slab or wall or on surfaces or under the frame of the false ceiling including PVC flexible conduit or through wooden partition including clamping arrangement as required complete all as sepcified and directed .(Note:- Two Run of 6.0 Sqmm cable and one run of 6.0 sqmm earth wire in and including conduit of suuitable size shall be measured as one unit).

All as per item Ser No.26 here in before but with using copper conductor of 2.5 Sqmm and using 2.5 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

All as per item Ser No.26 here in before but with using copper conductor of 4 Sqmm and using 4 Sqmm copper conductor as earth continuty cable compete all as specified and directed.

S&F PVC rectangular gang box multi purpose 5/15 Amps including making connections complete all as specified.

Supply and replace Rigid PVC casing & capping 20/25 mm wide complete all as specified and directed by Engr-in-Charge.

S&F PVC rectangular gang box multi purpose 5 Amps including making connections complete all as specified.

S&F socket out let 3 pin 5 amp multipurpose modular flash type complete all as specified and directed by Engr-in-Charge..

S&F switch 6 Amp modular flush type 240 volt one way complete.

S&F for MCB SP 6-32 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed.

S&F for MCB SP&N 10 to 63 Amps breaking capacity 10 KA 'C' series 240 volts 50 Hz complete all as specified and directed.

S&F for MCCB 4 pole 100 Amps breaking capacity 25 KA 'B' series 415 volts 50 Hz complete all as specified and directed.

S&F MCB distribution board double door sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 4 Ways complete all as specified and directed.

S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 8 Ways complete all as specified and directed.

S&F double door MCB distribution board sheet steel powder coated DBs suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 of 12 Ways complete all as specified and directed.

S&F vertical three phase distribution board including MCCB 4 pole 100 Amps as incomer with three phase and single phase TP/SP as outgoing complete with insulated bus bar arrangement IP 43 protection with metal double door 4 way complete all as specified and as directed by Engr-In-Charge

M & L for disconnecting the assembly from geyser and cleaning, repairing of defective parts and fixing the same complete all as specified and directed.

Supply and fixing of geyser 25 Ltr complete with latest star rating (ISI Marked) PVC connection and complete fittings in lieu of old burnt geyser as replaement all as specified and directed by Engr-in-charge

Supply and fixing replacement of the geyser assembly 25 Ltr complete all as specified and directed.

Supply and fixing, Life savior plug 16 A (Plug top) with power, built in test and reset button complete all as specified and directed

Taking down ceiling fans 48”/56” sweep, cleaning of dust properly cleaning, greasing& overhualing of bearings including refixing and connecting up all as directed .

Supply and fix in repairs 2.50 Mfd capacitior complete all as specified and as directed.

Supply and fix in repairs 4.00 Mfd capacitior complete all as specified and as directed.

Supply and fix in repairs ball bearing suitable for exsiting ceiling fans on site complete all as specified and as directed.

Supply and fix in repair ‘U’ clamps complete with nut, bolts & split pins Heavy duty suitable for existing ceiling fan complete all as specified and as directed.

Supply and fix in repair M.S. rod for ceiling fans 3 ft long with ‘U’ clamp at one end other end with out nut bolts washers or screwed thread with check nuts & pin complete all as specified and as directed.

Material and labour for rewinding of burnt fan motor with super enameled copper wire of suitable size 1200/1400mm sweep ceiling fan of any make, type, model including transporation (inclusive of material & labour) complete all as specified and as directed

S&F as in replacement of old burnt fan1200 MM sweep with super enameled whitr colour copper binding of motor suitable size 1200mm sweep ceiling fan of any make, type, complete all as specified and as directed

Supply and fix Ball bearings suitable for existing exhaust fans as per site.

Supply and fix copper alloy Bush suitable for existing exhaust fans as per site.

Material and Labour for rewinding of exhaust fans 250/300 mm Sweep with super enameled copper wire of suitable size of any make/type/model including transporation complete all as specified and directed.

Supply & Fix in replacement switch and socket box type 15 Amp single pole two way (ISI marked) complete.

Supply and fix in replacement of Exhaust fan Steel body ac single phase 230 volt of size 450mm sweep with blades and frame and louvers. Complete all as specified and directed

Supply and fix in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm all as specified and directed.

Supply and fixing in replacement of solar water heating element as per existing complete as specified and directed.

Supply and fixing in replacement of Thermostat for solar water heater system complete all as specified and directed.

Supply and fixing in replacement of solar waterproof floating LED Pool light, 3 W 1.2 V 4 color changing lights all as specified and directed.

M & L for painting of existing panel with the same existing colour and repair and replacement of the doors of the existing panel complete all as specified and directed.

Repairing and servicing of complete accessories of solar water Heater also check leakage cleaning ,watring of the plate & pipe, tanks, panels, and check loose wire connections and replace wires complete all as specified and as directed

M/S SHAHABUDDIN AND SONS (BID ID -3509566)

UTTRAKHAND BUILDERS (BID ID -3515055)

M/S MANSI TRADERS (BID ID -3512509)