PROVISION OF PARKING SHEDS,SINKS,WASH BASIN AND

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out Soft/loose soil

Excavating in post holes n.exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers, n.exc 50 Mtr and making good surface in soft/disintegrated soil

S&F of roof trusses (framed) trussed purlins, crane gantries, rails and fastering and heavy bracket framming (beem,tee,anlgle, channel or flat section) incl distance pieces, cleats etc confirming gde Fe-410W (grade E250) quality 'A'.

S&F of Mild steel tubular post in columns including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS 1161 1979 grade St -240

S&F MS Plates/Base plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment

Supply and fixing mild steel screw bolts (purpose made) .exc 12 mm and not exc 20mm dia with hexagonal or square at one end and screwed the other each screwed both ends to be fitted with washers and hexagonal or square not exc 30cm length complete all as specified

M & L for mild steel TMT bars 8 to 10 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No -07 but 6mm to 8mm dia for stirrups

M&L reinforced cement concrete 1:2:4 type B1 (20 mm graded aggregate for nominal mix) Foundations including rafts footings,foundation beams plinth beams, bases for columns etc bassements slabs under reamed piles and mass concrete

M&Lflat Form work to sides of concrete foundations footings bases of columns raft and raft beams sodes and soffit (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished of concrete surfaces.

M & L preparation of newly steel surface and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome all as specified

S&F for 0.50 mm thick AZ 150 pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick TCT (0.45 BMT) AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc. or for dhafts, wells, cesspits, manholes, pier holes, etc. n exc 10 m on plan and n exc 1.5m in depth and getting out complete all as specified.

Returning,filling in,including spreading,levelling,watering and well ramming soft/loose soil in layers n exc 25cm complete all as specified and as directed

Removing excavated soil not exc 50 mtr and depositing where directed a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

M&L for Plain cement concrete 1 : 4 : 8 type D -2 ( Using 40mm graded crushed stone aggregate) in foundations, fillings and mass concrete complete all as specified.

M&L for Brick work with fly ash modular bricks in cement mortar ,stright or curved on plan exc 6m mean radius built in cement mortar CM 1:6

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick/concrete surfaces finished with even and smooth without using extra cement.

M&L for two coat of cement base paint on walls and cornices after preparing plastered or unplastered old decorated surfaces by brooming down or steel wire brushing all as specified.

M&L Broken bricks Hardcore of gauge not exc 63 mm deposited spread and levelled in layers not exc 15cm thick watered and rammed to a true surface

M&L for 60mm thick machine pressed with grey cement and pigment precast cement concrete interlocking paver blocks any shape & size confirming to IS-15658-2006 of 80 mm thickness M-35 grade complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation

S&F in walls for Kitchen stainless steel Plate Rack of size 750mm X 600x250mm as approved by GE.

S & F wash Basin,vitreous china (flat back or angle back type) size 600x480mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe

S&F 15mm Pillar taps,cast copper alloy with capstain heads chromium plated screwed down high pressure with or without lettered 'Hot' or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed but fancy type

S&F Stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union fixed but fancy type

S&F soap dish any type fixed to plugs with chromium plated brass screws

S&F TowelRail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden plastic cleats (min wt 190 gms)

S&F32 mm bore trap Brass chromium plated trap "P' or S pattern for wash Basin and sinks with inlet and out let screwed for pipe or connections and with one cleaning cap and fixed

Supply and fix PVC (SWR single socketed in any lenth with rubber ring joints laid in trenches or walls of 75 mm dia internal bore

Supply and fix PVC (SWR) bends of any radius for a pipe of 75 mm internal bore with access door

S & F PVC (SWR) floor trap,plain with grating including jointing with solvent cement.except traps

S&F PVC connection but length 450 mm dia

Supply and fix Water heater storage type comprising tank, heating elements 1.5 KW, thermostat, glass wool insulation connected cable with top, 230V, AC electric capacity 25 Ltr BEE 5 Star rated with necessary supporting clamping arrangements complete all as specified and directed.

M&L for 15mm bore galvanised steel tubing (medium grade) with all fittings laid in trenches, wall/floor etc complete all as specified and directed.

S&F Bib cock with wall flange 15mm dia bore including surface finishing complete all as specified and directed.

S&F Angular stop cock with wall (steel) 15mm bore including surface finishing complete all as specified and directed.

S&F plug and socket type DB(functional unit) 20 Amps capacity with provision of single pole 20 Amps MCB, plug top and earth plug, grouted flush to walls complete all as specified.

M&L for submain wiring comprising single core, 2 Runs of 4 sqmm nominal cross sectional area, FRLS multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia in PVC conduit and its fittings complete surface/concealed including provision of 1x4.0 sqmm nominal cross sectional area multimultistranded copper conductor cable. PVC insulated unsheathed 1100 volts grade as earth wire complete incl taking down old UNSV sub main all as specified. (Make- Finolex/KEI/Havells for copper cable and Make- Prestoplast/Plaza for conduit and accessories) (Note:- 1. Extra length of cables/wire required for connection of MCB's/DB's shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly. 2. For concealed wiring cutting chases, chipping and plastering measured and paid seperately under relevant items).

M&L cutting chases, chipping in making good to facings required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed wiring etc and making good cutting not exc 10 cm girth in brick walls complete all as directed by Engr-in-charge.

S & F Geyser inlet & outlet connection pipe with 304 grade stainless steel reinforced (pack of 2, 24 inches) with checknut and washer complete all as specified & directed.

ZENITH CONSTRUCTION

M/S A. J. CONSTRUCTION

KAZI ENTERPRISE

SARKAR AND COM

JADAV CONSTRUCTION

Renuka Fero Products

CHANDRA CONSTRUCTION & CO.