Providing Installation Testing and Commissioning of pumping machinery along with allied electro-mechanical works at Horticulture Market Rajouri.

Laying and Jointing PVC Pipe. Heading

Supply, loading, transportation (MT), insurance, Unloading, carriage/ shifting (head load) of submersible pump set 3000 GPH x 120MH X 12.5HP motor. The recommended make of Pump should be Kirloskar/ KSB/ LUBI/Crompton/CRI along with motor at Bore Well Horticulture Market Rajouri. The equipment shall also be accompanied with test certificates and performance curves.

Installation, testing and commissioning of Submersible Pump Set 3000 GPH X 120 MH at Bore Well Horticulture Market, along with allied works by way of fabrication of 65mm dia GI pipe nipples 10 feet long welded with MS flanges-65mm dia at both ends-16nos respectively , for making delivery of the pump. Fabrication of GI pipe nipple with threads at one end & MS flange at other end & fastening the threaded end of nipple with the delivery of pump. Fabrication of gantry by way of making of base frame of MS channel and plates of required size. Grouting the base frame at bore well site, fab/erection of G.I. pipe nipples at both ends of the base frame, welding of pipe nipple of required size at top. Fabrication of MS clamps 65mm dia. - 02 sets for holding submersible pump & nipples. Providing of chain pulley block heavy duty of capacity 01 ton -01 no. Providing /Fitting of 6 mm square three core submersible cable for making of electrical connection from motor to control panel with proper thimbling & insulation. Coupling of pump motor with the help of coupling pulley. Lowering of pump motor set along with GI pipe nipples and submersible cable into the Bore well with the help of chain pulley block, ropes & skilled/unskilled labours. Providing/Fitting of MS bends 65mm dia. with MS flanges. Providing/Fitting of 65mm dia check valve with MS flanges, nut/bolts & washers, and interconnecting with the raising main with all allied welding work. Providing /Fitting of 20 HP automatic submersible control panel having protection devices -01 no. Providing/Fitting of nut/bolts, washers, tapes & sundry items required at site .Complete job includes cost of material, labour charges & carriage charge at site of work.

Fabrication/ Manufacturing of 25 KVA Servo Voltage Stabilizers. Oil cooled unbalance Type 380Volt, Complete with Transformer Oil in Copper windings capable of operating on unbalanced Voltage. Capacity : 25KVA Phase : 03 Make : Confirming to relevant ISO With all latest amendments Input voltage : (90-180 ) volt Output voltage : 380 volts +/- 1% Type : Manually operated Correction Rate : 09 to 25 V/sec Regulation : +/- 1% Frequency : 38 to 42 Hz Cooling Method : Oil Cooled Efficiency : 95% High & Low cut off : Installed with standard Capacity By pass change over Switch : Yes MCCB : Heavy Duty Single phase preventer : Yes Material of Construction : The Core should be first quality ( CRGO) Silicon Steel core, Conducting conductor should be off 99.95% of Electrolytic Copper MS Steel thickness of container 14/16 SWG. Transformer Oil to be used shall be of best quality Conforming of IS 335 with latest amendments. Voltage stabilizer shall be mounted on 02 pairs of H/D MS wheels for making shifting/ fixing easy. Voltmeter/Ampere meter Good quality ISI make of Required Specification : Toggle Switch 03 No for input/output reading of each face : Rotary Switches Of suitable Amp range each of 08steps 01 for Line voltage 02 for step down voltage 05 for step up voltage Heavy duty terminal block for input/output terminal Paint : Painting shall be enamelled steel grey / Green Colour.

Installation, testing & commissioning of 25 KVA servo voltage stabilizers by way of carriage/ shifting of stabilizer from stacking place to site of work on MT and HL. P/F of Copper cable of standard ISI make(as per site condition) for making connections from main switch to Voltage stabilizer for all the three phases in three leads with neutral & then from stabilizer to buss bar fuse system with proper thimbling duly crimpled by using crimpling tool & proper insulation. Conducting of whole electric circuit with the help of conduit pipes, PVC flexible pipes, bends etc. Filling of transformer oil up to required level after heat treatment/dehydration to make it moisture free. Job includes cost of material and Fitting charges.

Testing and commissioning of SPS pump motor set along with other allied electro mechanical equipments checking of all the electrical connections with magger, tightening of loose connections if any, plugging of leakage of joints by welding & tightening of nuts & bolts etc. job includes cost of material & labour charges for loading unloading carriage fitting & testing charges. ( one complete job )

G S ENGINEERING WORKS

Amit Electrical and Engineering Works

M/S FASTTRACK ENGINEERS