Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC 11 26 BHAGWANPURA KISHANGARH CHANDIGARH | ₹35.9 L | L1 | Accepted-AOC LOA |
| 2 | L2₹36.4 L+₹44,510 (1.24%)Rejected-Finance 315 INDUSTRIAL AREA II PANCHKULA 134113 | PANCHKULA | HARYANA | 134113 | ₹36.4 L+₹44,510 (1.24%) | L2 | Rejected-Finance Highest |
Tender Value
₹36.9 L
EMD Value
₹73,840
Closing Date
8 Apr 2025, 5:00 pmClosed
NAVEEN RATHEE
ED - Ambala
Pdg Audio and Video Conference System in Committee Room at First Floor and Electrical Fixtures at VVIPs Room in the Haryana PWD Rest House Sec 1 Panchkula Pdg Audio and Video Conference.
2025_HRY_437784_1
2025FAEABD21 BEB1 4F15 B69A 3B78A4941A65663BAR
Open Tender
Civil Works
Works
150 days
Ambala Cantt
Pdg Audio and Video Conference System in Committee Room at First Floor and Electrical Fixtures at VVIPs Room in the Haryana PWD Rest House Sec 1 Panchkula Pdg Audio and Video Conference.
2 documents required · 2 mandatory
₹5,000
₹73,840
Yes
24 Jun 2025
1 Apr 2025
9 Apr 2025
2 Apr 2025
8 Apr 2025
2 Apr 2025
Amount
[23.23.9]MISCELLANEOUS 9. Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required [Through Rate]
[23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. [Through Rate]
SITC of prpoposed system must be based on ITU standards and hardware based. No software based solution will be accepted. All components of the VC system like Codec, Camera, Microphones and Touch Control Panel/Remote control should be from the same OEM. UHD 2160p (4K) PTZ Camera, 4K Codec, Omnidirectional Digital Microphone and Touch Control Panel/Remote control from the same OEM. It should support H.323 and SIP standards for communications. It should support interoperability and bandwidth saving using video compression H.264 AVC, H.264 High Profile, H.265. It should support 4K30 fps,1080p30 fps,720p 30 fps. It should support both wired and wireless content sharing using standard based H.239 and BFCP. It should also support audio from Laptop used for content sharing. It should transmit content to the far end location up to 4K15fps. It should support inbuilt feature for wireless content sharing from Windows, MacOS, Android, iOS Smartphones and Tables without downloading any application on the user device. It should support G.711, G.728, G.729A, G.722, G.722.1, G.719 or better. It should support 20kHz or better bandwidth with crystal clear audio and stereo sound. It should have inbuilt technology to identify and eliminate non-human distracting noises such as keyboard typing, paper shuffling and wrapper crinkling during video calls. Automatic Gain Control and Automatic Noise Suppression. It should have ports for connecting minimum 3 cameras directly on the codec or via AV over IP functionality to connect upto 3 cameras. 1 x HDMI input to share 4K/Full HD content from PC/Laptop/Document camera/PTZ Camera. 1 x RCA/3.5mm stereo line-in. 2 x HDMI outputs for connecting primary and secondary 4K(UHD)/Full HD displays. 1 x RCA/3.5 mm stereo line-out. 1 x RCA/3.5 mm stereo line-out. 1 x 10/100/1000 Ethernet port. 1 x USB to support system software upgrade. Bluetooth 5.0 and WiFi 802.11a/b/g/n/ac (MIMO) for Wireless Content Sharing for Guests using their Smartphones and Tablets (Android and iOS). The camera should support group framing and presenter tracking. The camera should support minimum 12X Optical Zoom, PAN plus /-170°, Tilt plus /- 30° and minimum 10 camera presets. The camera should support 4K UHD resolution. Video Conference Camera and Codec should be controlled using same touch panel/Remote. Must support IPv4 and IPv6 from day one on both H.323 and SIP. Auto Gatekeeper Discovery, Lost Packet Recovery (LPR) technology, IP Precedence and DiffServ, Configurable MTU size. The system should have inbuilt functionality to use the VC system as an external camera and microphones when connected to a Laptop/PC over a single USB cable without using any external hardware components to connect to any Cloud Based VC platform like Cisco Webex, Zoom, BlueJeans, Microsoft Teams, Google Meet, etc. . Media Encryption (H.323, SIP): AES-128, AES-256, H.235.6 support. Authenticated access to admin menus, web interface and APIs. Local account password policy configuration. Global Directory/Centralized Directory/LDAP support. H.460.18, H.460.19, SSL, TLS. It should be possible to natively register the VC system with Microsoft Teams Room and Zoom Room account for native cloud based video calling features and experience. Make Panasonic/Poly Hp/ Lifesize
SITC of PC Client Intel i7 processor with clock speed- minimum 3.0GHz, RAM8 GB and Expandable. Window 10 or Window 2016 Server or Unix based Edition .Minimum 1TB . LAN Interface 10/100/1000 Mbps Ethernet.).. Mouse Optical . USB port at front. Make: HP/ Dell/Lenovo.
SITC of 15 Mtr HDMI cable Connectors at both ends Make : Key Digital/Manhattan/Kramer
SITC of 20 Mtr HDMI cable Connectors at both ends Make : Key Digital/Manhattan/Kramer
SITC of 30 Mtr HDMI cable Connectors at both ends Make : Key Digital/Manhattan/Kramer
SITC of 10 Mtr USB to Type C cable Connectors at both ends to complete the job.
SITC of 12U Equipment Rack .Make: Comrack/HCL/Valrack.
SITC of Chairman Unit Microphone with flexible stem can be easily adjusted to suit the user. For maximum comfort, a short 480 mm (18.9 in) microphone, Frequency response 200 Hz to 12.5 kHz,Headphones load impedance ) 32 ohms ( 1k ohm,Loudspeaker nominal output 72 dB SPL, Dimensions device without microphone (H x W x D) ,64 x 203 x 146 mm (2.5 x 8.0 x 5.7 in) Height with microphone in horizontal position 130 mm (5.1 in) Certifications and approvals :- CE,WEEE,FCC,ICES-003,KCC, RCM,EAC,SASO Make Beyerdynamic/Bosch/Sennheiser
SITC of Digital Unit Microphone with flexible stem can be easily adjusted to suit the user. For maximum comfort, a short 480 mm (18.9 in) microphone, Frequency response 200 Hz to 12.5 kHz,Headphones load impedance ) 32 ohms ( 1k ohm,Loudspeaker nominal output 72 dB SPL, Dimensions device without microphone (H x W x D) ,64 x 203 x 146 mm (2.5 x 8.0 x 5.7 in) Height with microphone in horizontal position 130 mm (5.1 in) Certifications and approvals :- CE,WEEE,FCC,ICES-003,KCC, RCM,EAC,SASO Make Beyerdynamic/Bosch/Sennheiser/Brahler
SITC of Control Unit allows Discussion Devices and system cameras to be conveniently connected to and removed from the system as required Mains voltage 100 to 240 VAC ± 10% ,Current consumption Maximum 0.6 A (100 VAC) to 0.2 A (240 VAC),DC supply to Discussion Devices 24 V ± 1 V (current limited) ,Number of Discussion Devices per Control UnitMax. 40 devices per trunk connector, Discussion Device Loudspeakers volume control ,15 steps of 1.5 dB (starting from -10.5 dB) ,Limit threshold level to unit 12 dB above nominal level Make Beyerdynamic/Bosch/Sennheiser/Brahler
SITC of Extension Cable Assembly - 10 Mtrs Make Beyerdynamic/Bosch/Sennheiser/Brahler
SITC of Ceiling Loudspeaker Rated power 24 or Better Watt. Maximum power 30 Watt. Sound pressure level 1 kHz oct, 1 W, @1 m 90 dB (±3 dB) .Effective frequency range 70 Hz to 20 kHz. Co-axial full-range speaker with poly cone tweeter. Simple power tappings at full, half and quarter power. Power taps at 100 V 24 W – 15 W – 7.5 W or Better . 100 hours PHC (Powering Handling Capaclty) test in acc. to IEC 60268-1and5. SAFE (Simulated Acoustic Feedback Exposure) test to withstand 50 sweep runs of square wave from low frequency to high frequency at twice the rated power, simulating feedback situation. Make JBL/Bosch/QSC/Brahler
SITC of Handheld Wireless Mic system that has a min of 14-hour battery life from two AA alkaline batteries. Cardiod polar pattern,Dynamic microphone ,frequency response 83Hz-18kHz,RF sensitivity ( 1.0 Uv,Image rejection )55dB,Dyanmic range )95dB and receiver having 30 channels possible,S/N ratio )100dB A,dynamic range )95db B,distortion (1 %,frequency band:618-634MHz,modulation: plus /-40kHz Make Beyerdynamic/Bosch EV/QSC/Brahler
SITC of 4x4 HDMI 2.0 Matrix Switcher with Audio Matrix.4HDMI inputs, 4 HDMI outputs. Supports 4K/60 4:4:4, HDR, HDCP2.3 compliant. Controllable by front panel, IR, RS232 and TCP/IP. HDMI Audio Signal LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital® Plus, DTS:X™, and DTS-HD® Master Audio™ pass-through. Bandwidth 18Gbps. Make: Milestone Pro/ Kramer/ Extron
SITC of Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices • Full Buffer System: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source and display, EDID Control handshake, and Hot Plug control • IR Sensor: Sensor powering via plus 5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block • Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units • RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector • Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio • CEC Support: For inter-device control between input and output HDMI channel • I2C Communication: EDID and HDCP authentication to Display and Source • Control System Support: Fully controllable by all RS-232 supported control systems Make : Milestone Pro/ Kramer/ Extron
SITC of Pneumatic Desk top Plug Connection Panel having 1 nos network ports, 1 no. VGA port, 1 no. 5 amp AC socket, 1 no. audio port and 1 no. HDMI port Make: Milestone Pro/ Kramer/ Extron / Gigatron
SITC of 1.5 mtr HDMI cable in existing pipe/ channel connectors at both ends complete in all respect. Make : Key Digital/Manhattan/Kramer
SITC of 2 Core, 1.5sq mm Speaker Cable For Loudspeakers Make: Havells/Polycab/Finolex
SITC of MK Channel NCT 1050 ( 100mm x 50mm ) Complete the job in all respect upto entire satisfaction of the Engineer -in-charge of work
SITC of 17U Equipment Rack with provision for housing all control equipment with front and rear door, Blower for cooling and proper locking arrangements and as per the specifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Makes: Valrack /Netrack/ Comrack
SITC of Composite Audio Cable multi Stranded 2 Core double insulated. complete on all respect. Make:- CHETAN/ ASIAN/ DEEPCAB
SITC of Digital signal processor with 6 inputs, 4outputs, with AEC, USB Connectivity, Dante connectivity. Makes : Sennheiser / Xilica / Audio-Technica
SITC of 3Core Power cable 1.5 sqmm.Make: Finolex/Polycab/Havells
SITC of Dual Band Concurrent Indoor Managed AP .The APs must support 802.11b / g / n / ac /ax. Should provide at least 24 dBm Radio output power on both radios. Access Point must be having integrated internal antenna only. To benefit fully from WIFI6, the 5GHz radio should support MU-MIMO 2x2:2 to serve the client devices better. Should Support up to 32 SSID (16 On Each Band) and support datarate 1.7 Gbps.Encryption supported should include. Should come with quick configuration mode and can be monitored, configured and managed by Web GUI or Mobile App. For bulk deployment, the AP should support static IP and VLAN assignment from controller at the time of provisioning before deployment. Support for DHCP Option 43 and 60 for auto controller discovery. Should be configurable as bridge mode or router mode without any hardware or firmware changes at time of first time setup or after deployment.Access point should support Bridge and router mode simultaneously. Make - Cisco/Aruba/Netgear/Alcatel
Insat Techno Services (BID ID -1235017)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .