DISTRIBUTION OF STANDBY ELECTRIC SUPPLY FOR CENTRAL HEATING PLANT AND ALLIED WORKS AT DAINKUND AGE B/R AIR FORCE DALHOUSIE UNDER GE AIR FORCE PATHANKOT

Amount

1 Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in hard/dense soil for laying cables. Erection of poles complete all as specified and directed by Engineer-in-Charge. – 67 Cum 2 Returning filling including spreading, levelling, watering and ramming in layers not exc 25 cm in soft/loose soil complete all as specified and direct by Engr-in-Charge. - 61 Cum 3 Removing surplus excavated soil n-exc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the staring point complete all as specified and directed by Engr-in-Charge. - 7 Cum 4 PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in mass concrete for foundation of pole. Transformer, Panel board, stay post top lantern, repair to road cutting, drain, path etc complete all as specified and directed. – 0.45 Cum 5 Supply, laying testing and connection 95 Sqmm 3.5 core XLP)E insulated, screened, PVC bedded, galvanized steel strip or wire armored heavy duty electrical cable with aluminum conductor, 1100 volts grade laid in trenches/ducts/wall/road or through pipe with suitable size of cable glands, crimping type cable lugs complete all as specified and directed by Engr-in-Charge. – 569 RM 6 M&L for GI pipe light grade laying in trenches / under floor/on walls for protection of UG cables all as specified and directed of size 80mm dia, Make TATA/Parkash/Surya/Jindal- 85 RM 7 Supply and fix of heat shrink joint indoor/outdoor LT 1100 volts grade 70-120 sqmm, 4 core, Make-3M, Cat No EPKT0035 or equivalent of M-seal/MS Seal/3M – 2 Each 8 Supply, fix and laying of DWC pipe of size 90/75 mm dia (outer dia) with croupier including passing the LT Cables of size 95 sqmm through the DWC pipe for protection of cable all as per direction of Engr-in-Charge. – 393 RM 9 S&F of onload changeover switch in sheet steel enclosure of size 200 Amps 4P including connection of cable in proper dressing with saddle complete Make : Havells -1 No 10 Fabrication, supply, installation and testing of LT feeder pillar box floor mounted dust / vermin proof outdoor type powder coated of size 0.85X0.60X0.50 mtr factory fabricated, made out of MS Sheet of thickness 3.15 mm mounted on angle iron legs made out of angle iron of size40X40X6mm within front & rea opening with locking arrangement, containing bus bar chamber to accommodate 3 phase & 1neutral copper busbar of size 20X10mm drilled with suitable holes for fixing of cables and mounted on epoxy based insulator in horizontal position (stepped manner) in feeder pillar including necessary excavation and PCC work 1:2:4 complete all as specified and directed by Engr-in-Charge. -1 No 11 S&F 50mm or 2” Fuel flow meter instrument suitable for 60 Deg C flanged end including cutting of existing pipe and fit the flow meter and testing complete all as specified and directed: Make Flowtech- 3 Each 12 S&F of Heavy-Duty DOL starter Type DX-P with robust 4 Pole Contactor & LR1D OLR in S.S. enclosure (Motor rating AC-3 Duty, 415 Volt, 50Hz, 3 Ph) of size suitable upto 7.5 HP 415 Volts, Relay range 09 – 14 Amps Complete. Make :- C&S cat Part No BE1-DXP204-316 X or equivalent to L&T/BCH – 2 Each 13 S& F of cable route indicator for LT UG cable of 1100 Volts 50mm dia CI Plate marked on LT cable bolted with 40 X 5 mm flat iron member of height 0.7 mtr, embedded in PCC 1:3:6 type C2 of size 20 X 20 X 30 cm block complete all as specified and directed.

M/S DUGGAL CONSTRUCTION CO (BID ID -3126559)

kailu construction co (BID ID -3128861)

M/S ANSHUL ENTERPRISES (BID ID -3127822)