Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC NO 2 GF AKSHAYRAJ APARTMENT JUBILEE CIRCLE BHUJ 370 001 | BHUJ | KACHCHH | GUJARAT | 370001 | ₹24.5 L Quoted ₹26.4 L | L1 | Accepted-AOC Accepted for acceptance being lowest. |
| 2 | L2₹29.0 LRejected-Finance 121 MADHAV SQUAR OPP AVANTIKA COMPLEX LIMDA LANE JAMNAGAR 361001 | JAMNAGAR | GUJARAT | 361001 | ₹29.0 L | L2 | Rejected-Finance Not L1. |
| 3 | L3₹31.5 LRejected-Finance | ₹31.5 L | L3 | Rejected-Finance Not L1. |
| 4 | L4₹32.1 LRejected-Finance | ₹32.1 L | L4 | Rejected-Finance Not L1. |
| 5 | L5₹32.4 LRejected-Finance INS VALSURA JAMNAGAR | JAMNAGAR | GUJARAT | 360520 | ₹32.4 L | L5 | Rejected-Finance Not L1. |
| Sl No | Description | Qty | Unit | Sukhi Electricals L3 | M/s SK Traders L7 | jagdish machinery stores L5 | SURESH ELECTRICALS L2 | Krishna Bhoomi Enterprise L4 | M/S Rajendra Constructions L6 | M/s. Ambabhai K patel L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/loose soil for taking up/laying cable/pipe etc complete all as specified and directed. | 160.65 | Cum | 390 ₹62,653.50 | 457 ₹73,417.05 | 425 ₹68,276.25 | 250 ₹40,162.50 | 410 ₹65,866.50 | 450 ₹72,292.50 | 250 ₹40,162.50 |
| 2.00 | Returning, filling including spreding, leveling watering & well ramming in laying not exc. 25cm for soft / loose soil complete all as specified and directed. | 120.65 | Cum | 155 ₹18,700.75 | 211 ₹25,457.15 | 185 ₹22,320.25 | 125 ₹15,081.25 | 170 ₹20,510.50 | 199 ₹24,009.35 | 40 ₹4,826 |
| 3.00 | Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for soft / loose soil complete all as specified and directed. | 40 | Cum | 355 ₹14,200 | 399 ₹15,960 | 371 ₹14,840 | 125 ₹5,000 | 380 ₹15,200 | 385 ₹15,400 | 250 ₹10,000 |
| 4.00Supply and laying in trenches in road cross / floors tube galvanished iron light grade with all fittings for protection of cable of following dia/bore of pipe :- | ||||||||||
| 4.10 | (a) 40 mm bore | 12 | RM | 399 ₹4,788 | 455 ₹5,460 | 435 ₹5,220 | 377 ₹4,524 | 420 ₹5,040 | 451 ₹5,412 | 350 ₹4,200 |
| 4.20 | (b) 50 mm bore | 12 | RM | 435 ₹5,220 | 491 ₹5,892 | 471 ₹5,652 | 399 ₹4,788 | 450 ₹5,400 | 488 ₹5,856 | 380 ₹4,560 |
| 5.00 | Supply and lay in replacemet and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 95 Sqmm 3.5 core complete all as specified and directed.
Note:-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule. | 100 | RM | 512 ₹51,200 | 514 ₹51,400 | 550 ₹55,000 | 775 ₹77,500 | 535 ₹53,500 | 499 ₹49,900 | 500 ₹50,000 |
| 6.00 | Supply and lay in replacemet and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 70 Sqmm 3.5 core complete all as specified and directed.
Note:-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule. | 100 | RM | 390 ₹39,000 | 463 ₹46,300 | 425 ₹42,500 | 618 ₹61,800 | 410 ₹41,000 | 458 ₹45,800 | 400 ₹40,000 |
| 7.00 | Supply and lay in replacemet and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 50 Sqmm 3.5 core complete all as specified and directed.
Note:-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule. | 100 | RM | 333 ₹33,300 | 381 ₹38,100 | 361 ₹36,100 | 458 ₹45,800 | 350 ₹35,000 | 377 ₹37,700 | 280 ₹28,000 |
| 8.00 | Supply and lay in replacemet and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 35 Sqmm 3.5 core complete all as specified and directed.
Note:-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule. | 100 | RM | 250 ₹25,000 | 335 ₹33,500 | 299 ₹29,900 | 338 ₹33,800 | 280 ₹28,000 | 325 ₹32,500 | 230 ₹23,000 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
15 Jan 2026, 6:00 pmClosed
GE (AF) JAMNAGAR NO.2
Air Force-II, Udhyog Nagar, Jamnagar - 361004
REPAIR / MAINT OF EXTERNAL ELECTRIC SUPPLY ITEMS, STREET LIGHT, UG CABLE AND CONNECTED ITEMS IN AF STATION KHAMBHALIYA AND DWARKA UNDER GE (AF) JAMNAGAR NO.2
2025_MES_746036_1
8612/E8
Open Tender
Electrical and Maintenance Works
270 days
GE (AF) JAMNAGAR NO.2
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (AF) JAMNAGAR NO.2
₹60,000
Yes
7 Mar 2026
24 Dec 2025
17 Jan 2026
24 Dec 2025
15 Jan 2026
7 Jan 2026
Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/loose soil for taking up/laying cable/pipe etc complete all as specified and directed.
Returning, filling including spreding, leveling watering & well ramming in laying not exc. 25cm for soft / loose soil complete all as specified and directed.
Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for soft / loose soil complete all as specified and directed.
Supply and laying in trenches in road cross / floors tube galvanished iron light grade with all fittings for protection of cable of following dia/bore of pipe :-
(a) 40 mm bore
(b) 50 mm bore
Supply and lay in replacemet and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 95 Sqmm 3.5 core complete all as specified and directed. Note:-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply and lay in replacemet and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 70 Sqmm 3.5 core complete all as specified and directed. Note:-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply and lay in replacemet and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 50 Sqmm 3.5 core complete all as specified and directed. Note:-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply and lay in replacemet and testing cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade, of size 35 Sqmm 3.5 core complete all as specified and directed. Note:-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply and laying in replacement XLPE insulated PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor 1100 volt grade of size 25 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. Note-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply and laying in replacement XLPE insulated PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor 1100 volt grade of size 16 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. Note-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply and laying in repair XLPE insulated PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor 1100 volt grade of size 10 Sqmm 2 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. Note-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Supply and laying in replacement XLPE insulated PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor 11000 volt grade of size 95 Sqmm 3 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. Note-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.
Note for Item No 5.0 to 12.0: (a) The contractor shall also provide doucble wall corrugated (DWC) high density poythene pipe (HDPE) of suitable size for cable protection of PN-4 with IS 16098-2013 Part-2 (with CML No) with and including all fittings and jointing material for electric cable and laid in trenches. (b) Rates for cable protection pipe shall be included in respective above item Nos 5.0 to 12.0. (c) Unservicable pipe shall be catered in Schuedule of Credit.
Supply, fixing and testing after jointing cable jointing kit for 11 KV grade cable for indoor type end termination heat shrinkable joint complete with jointing material and accessories suitable for XLPE armoured aluminum cable of size 95 sqmm 3 core complete all as specified and directed.
Supply, fixing and testing after jointing cable jointing kit for 11 KV grade cable for outdoor type end termination heat shrinkable joint complete with jointing material and accessories suitable for XLPE armoured aluminum cable of size 95 sqmm 3 core complete all as specified and directed.
Supply, fixing and testing after jointing cable jointing kit for 11 KV grade cable for straighthrough heat shrinkable joint complete with jointing material and accessories suitable for XLPE armoured aluminum cable of size 95 sqmm 3 core complete all as specified and directed.
M&L for earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron earth strip 32x6mm up to test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI earth wire protection pipe 50mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I 1991, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion complete all as specified and directed.
Supply and fixing LED light fitting 1x30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.
Supply and fix MCB’s single pole with neutral, 6 to 32 Amps, 250 volts with ‘B’ curve,10 KA fixed in existing PVC box including connecting complete all as specified and directed.
Supply and fix MCB TPN, 40 to 100 Amps, 250 volts with ‘B, curve,10 KA fixed in existing PVC box including connecting complete all as specified and directed.
Supply and fix in replacement 200-210 Watt LED flood light with pressure die-cast aluminium housing, complete with all accessories, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed.
Supply and fix in repair LED street light fitting of 60 W sealed optic luminaire with housing made of die cast aluminium with smooth finish powder coated for better environmental protection complete all as specified below:- (i) The fixture shall be designed so as to ave lumen maintenance of at least 70% at the end of 70000 hours. (ii) The luminaire should be operable with auto adjustable 120-240 volt supply using the same driver. Ambient temperature at LED should not be more that 70 degree centigrade. (iii) Power factor of the electronic driver should be at least 0.90 abd efficiency of the luminaire to be more than 85%. (iv) The fixture should be dark sky complaint. The fixture should use aluminium, MCPCB printed circuit boards for better thermal management. (v) The luminaire should throw the perfect amount of uniform lught with exactly the desired intensity, and best pole spacing, along with better light control. (vi) The luminaire shall employ indivdual optical lens for the each of the LED's to ensure better uniformity of light distribution. (vii) The fixute should be vibration resistance, if the fixture is also to be used in vibration prone areas like flyovers/bridges. (viii) Heat dissipation should be managed through a built in external heat sink. (ix) Colour rendering index of minimum 65 with color temprature of 4000K.
All as per item No 21.0 above but 35 W/40W light
Supply and erect in true vertical position Prestressed concrete pole, 9.0 metres long. of size 102mm x 152mm at top and 102 mm x 289mm at bottom class 10 complete all as specified and directed. Note: (i) PCC foundation & coping shall be measured & paid separately.(ii) Excavation earth work and PCC will be measured and paid for seperately under respective item of schedule "A".
M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete in foundation of poles complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-2 (using 20mm graded crushed stone aggregate) as in foundation, filling and mass concrete in foundation of stay assembly complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) as in benching, coping, including weathering slightly rounded or chamfered angles as directed including necessary complete all as specified and directed.
Disconnecting the existing unserviceable MCCB of 63 A capacity, taking out from the panel board and supply and fix new MCCB four pole of 63 Amps, 25 KA breaking capacity as per site requrement, exiting capacity suitable for 415 Volt, 50 Hz, 4 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed.
Disconnecting the existing unserviceable MCCB of 100 A capacity, taking out from the panel board and supply and fix new MCCB four pole of 100 Amps, 25 KA breaking capacity as per site requrement, exiting capacity suitable for 415 Volt, 50 Hz, 4 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed.
Disconnecting the existing unserviceable MCCB of 125 A capacity, taking out from the panel board and supply and fix new MCCB four pole of 125 Amps, 25 KA breaking capacity as per site requrement, exiting capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed.
Disconnecting the existing Unserviceable MCCB of 200 capacity, taking out from the panel board and supply and fix new MCCB four pole of 200 Amps, 35 KA breaking capacity as per site requrement, exiting capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed.
Material and labour for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed. Note :- Due to dea sore area angle iron must use the Hot Dipp and stainless steel nut bolts.
Supply and install gang operated air break switch triple pole, mechanically operated,mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 200 amps of capacity 11000volts complete all as specified and directed.
S&F rigid non-metallic PVC conduit 20mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing ccessoriessuch as couplers, lock nuts, saddles, pipe hooks etc. from PVC Junction Box to street light bracket for protection of cable fixing clamp on PCC poles drilled the hole and insert a PVC gutti and screwed suitable size screw and fix the clamp complete all as specified and directed.
Surcafe excavation not exceeding 10 cm deep and averaging 5 cm deep and getting out grass, debries to make the surface free from grass and stones and debries at pump House, STP plant, sub statin complete all as specified and directed. Note: All debris and rubbish shall be removed from MD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.
Material and labour for preparation of old painted surface of electrical panel inner and outer surface complete of size length (0.5 m to 1 m), Height (1 m to 2 m) and Breadth (upto 0.5 m) by scrubbing with iron brush and applying two coats of synthetic enamal paint with spray machine complete with repair of locking arrangements complete all as specified and directed.
Servicing of transformer upto 400 KVA/200 KVA at carrying out insulation resistant test(HT-LT,HT-E & LT-E), BDV of Oil (top & bottom sample), Filtration & topping up of oil, test, quaterly resistance check of earth pits, arresting of leakage by proper tightening of terminals& joints, replacement of loose or burnt out gasket & proper sealing of valves etc complete all as specified and directed. Note: (i)The cost involved for oil filtration & topping with new mineral oil will be measured & paid separately. (ii) The contractor should produce all testing certificates immediately after testing .Moreover testing should be carried out by authorized OEM only. (iii) The contracted labour manning the substation should immediately inform any oil leakage,change in colour of silica gel,level down of oil in conservator etc.
M & L for topping up of transformerr oil having dielectric strength 50 KV or so, as per IS specification in various electrical equipment installed at AF Station, Khambhaliya or Dwarka complete all as specified and directed.
S&F in replacement worn out HT terminal with bush of existing size for transfomers upto 500 KVA capacity to arrest leakage by opening top cover and refixing the same with replacement of worn out gasket complete all as specified and directed.
S&F in replacement worn out LT terminal with bush of existing size for transfomers upto 500 KVA capacity to arrest leackage by opening top cover and refixing the same with replacement of worn out gasket complete all as specified and directed.
S&F in replacement breather with accessories of transformer as existing including silca jel complete all as specified and directed.
M & L for servicing of servo controlled voltage stabilizer 300/200 KVA, 415Volt including setting of Input and Output voltage complete all as specified and directed. Note: Spare required for replacement if any will be measured and paid separately.
M & L for topping up of voltage stabilizer oil having dielectric strength 50 KV or so, as per IS specification in various electrical equipment installed at AF Station Khambhaliya or Dwarka complete all as specified and directed.
Supply following spares only for servo controlled voltage stabilizer of 300/200 KVA
Shunt Trip coil of any size
Cut out PCB, 3-phase
Control PCB
control wire
RC network for 10 KG motor
Sensing Transformer for Analog control
Stabiliser carbon Brush for Dimmer
Control wire with Glass fuse
Material & Labour for preparation of old painted surface of steel tubular pole (9/11 meter long above coping) or cemented POLE and applying two coat of oil enamel paint or cement paint, making of strip of 20 cm width (sky blue and white in alternate band) upto 1400 mm height with one synthetic enamel paint, rewriting pole No by painter with enamel paint, and painting the existing MS clamp with one coat of aluminum paint complete all as specified and directed.
Material and labour for writting of pole Nos on existing pole with stencil out with white colour in sky blue colour background of 80 mm hight around the radius of pole complete all as specified and directed.
Supply and fixing 3 pole power contactor type ML 2 AC 3 rating (32 A) Aux Contactors 2NO+2NC Cat No SS90701 of Make - L&T compatible with digital timer of suitable capacity complete all as specified and directed.
Supply and fixing 4 pole power contactor type MCX 21 AC 1 rating (100 A) Make- L&T or equivalent suitable capacity complete all as specified and directed.
Disconnecting the existing unserviceable PVC box and Supply and fix PVC box of outside size 350mm x 250mm x 150mm and inside size 300mm x 200mm x 105 mm including 3 phase connector of suitable amps rating including 1 No MCB SP ,6 to 32 Amps, 250 volts with 'C' curve, to be fixed on pole with clamp complete all as specified and directed.
Dismantling and taking down defective/unserviceable LED street lights fitting and flood lights of any type and of any description and capacity from 09/11 high electric pole and gates .
M & L for repairing the existing LED Streeet light drivers for light Model 30/ 60 W NEO K by taking down the unserviceable LED street light drivers from the street light and repairing/replacing the unserviceable parts of drivers like internal wiring etc and refitting the same with all connection after making serviceable complete all as specified and directed. Note :-Drivers to be paid saperately.
Supply and fix in repair PVC insulated FRLS copper conductor wire of 2 core 1.5 sqmm from existing syntex box to light fitting complete all as specified and directed.
Taking down of unserviceable High mast street light fittings of any type, any description and of any capacity upto 16 metre high steel tubular high mast electric pole complete all as specified and directed.
Material and labour for rewinding of burnt / over heated HT/ LT limbs of transformers 11 KV / 433 volts, 3 phase of capacity 50 to 250 KVA by using double paper covered (DPC) insulation, cotton tape, superior quality insulated copper wire of suitable gauge, size, specification complete all as specified and directed.
Material & labour for spray painting of transformers of capacity 150 KVA to 400 KVA of any type & make at any location with two coats of synthetic enamel paint (smoke grey) after thoroughly cleaning of dust, scale, grease, dirt and other foreign material and removing of existing paint and preparation of surfaces including writing of capacity and SM No./ MES No. on transformers complete all as specified and directed.
M&L for alternative arrangement by hiring, transportation of transformer of capacity 200/400 KVA in place of unserviceable transformer on hire basis for 20 days including, installation, connecting and testing of transformer and return back after installation of repaired transformer complete all as specified and directed. Notes:- (i) Contractor must arrange hired transformer including transportation and installation at site immediately after receipt of verbal/telephonic/written complaint from JE/Engr-in-Charge within 1 day. Any delay beyond 1 day post receipt of complaint shall be penalized @ Rs 3500/- per day and shall be recovered from next due RAR. (ii) Repairing of transformer must be completed within 20 days after receipt of verbal/ telephonic/ written complaint from JE/Engr-in-Charge. In case of any delay, no extra claim will be entertained towards hiring charges beyond 20 days and the contractor shall not be allowed to shift the hired transformer until replaced by repaired transformer. In case of any kind of fault / defect occurred in hired transformer, the contractor shall have to arrange further replacement without any additional cost and shall repair the defect from his own expenses. (iii) Contractor should check the available infrastructure and to be sure regarding safety of hired transformer before installation. The rate quoted is deemed to be including transportation cost, earthing lead etc.Note: Arrangement of transfomer and restoration of power supply should be done within 06 hrs from intimation further delayed in restoration after that will be charged Rs 500/- per hour to the contractor.
M & L for Locating & pinpointing conductor and insulation faults of low and high resistance, intermittent or flashing nature in XLPE HT underground power cables of the rating 11 KV with the help of Pre-locator with time domain laptop based reflectometer/ electrometer using pulse echo method, impulse current method & decay method, and using DC high voltage surge generator to produce surge to trace route and pinpointing fault with the help of dual channel digital sound system, magnetic & acoustic for location of fault with acoustic transducer (pickup) and the amplifier with headphones, after pinpointing of faut location necessary excavation and taking out of faulty cable for repair/ replacement of joint, relaying of cable/ cover & brick protection, refilling of soil and removal of surplus soil etc at Jalandhar cantt complete all as specified and directed. Note: The joint shall be measured and paid separately under relevant item. The qty of item will be executed at different times during currency of contract as directed by Engr-in-Charge. Hence, contractor shall quote his rate accordingly for arranging and executing the items accordingly.NOTE: Fault should be detected and rectified within 24 hrs from intimation to contractor after that penalty should be made to contractor at the rate of Rs 500 per hour.
Servicing of ring main unit (RMU) 2/3 way 11 KV by taking shut down and disconnecting electrical connections, removing of dust with blower, cleaning of all movable/fixed parts, removing moisture/ hard carbon deposited due to flash over on bus bars and insulators with CRC/ Stanvac moisture/ carbon remover, checking all components, insulators/ studs, adjusting the male / female bushings in proper spacing, lubrication of moving parts, greasing all parts, tightening nuts and bolts, adjustment of breajer mechanism/ load break switch , earth switch to ensure slip free operation, testing of CT & PT with injection kit and reconnecting of all electrical connections, testing of RMU for healthiness and proper functioning and submitting report complete all as specified and directed. Note: (a) Contractor shall submit complete report regarding CT & PT, Protection relay functioning pick up current & corresponding time value setting tests carried with injection testing kit, Relay testing kit. Any major Spare replaced shall be measured and paid seperately.(b) The service shall be carried out by OEM/HIS REP/Channel partner/service centre/qualified service engineer or reputed firm after approval from Engr-in-charge.
Material and labour for charging of SF6 gas in 11KV RMU 2/3 way, CSS, SF 6 breaker 66KV at site complete all as specified and directed.
Material and labour for replacement of spring charging motor of suitable AC/DC voltage rating for 11KV RMU 2/3 way of series FBX2025/FBX1844 or VCB existing at site complete all as specified and directed.
M&L for repair of RMU 11 KV 2/3 way any type & any make (ABB,C & S or any other make) complete including removing/ disconnecting electric cable and earth connections from RMU, shifting the RMU through suitable transport to OEM/ authorized manufacturer/ service centre workshop at Chandigarh/ Delhi or other loc and opening / step opening of RMU parts and diagnosing the fault complete including making necessary repairs, replacing complete defective AC & DC circuit control protection wiring, complete cleaning, servicing and replacing major defective parts and re-fixing, assembling and replacing parts for satisfactory functioning and shifting back to installation, commissioning and making electrical connections complete all as specified and directed. Note: The major spares replaced shall be measured under relevant items of Sch. Nothing shall be paid extra on account of any freight, transportation, lifting or T&p charges in r/o item.
M&L for Support bushing insulator suitable for 12 KV RMU
M&L for epoxy resin cast HT bushing with stud to be fix on SF6 gas chamber incl vacuumising chamber and refilling of gas after fixing HT bushing
M&L for Extensibility kit complete with 3 No Extension connectors & 3 Nos Adaptors
M&L for HT Electric fuse for RMU upto 12KV
M&L for earth switch assy for RMU
M&L for load break switch assy 12KV for RMU
Vaccum circuit break switch 12 KV for RMU
M&L for battery 12V, 20 Ah min for RMU
battery charger 12V/24V for RMU as per existing one
M & L for brass stud for RMU / VCB
M&L for Self powered relay DPX-V5 suitable for operation of RMU complete all as specified and directed.
S&F in repair PVC 3 Core copper cable 1.5 Sqmm insulated for fixing of junction box to street light fittings complete all as specified and directed.
Supply in repair and fixing outdoor type solar type automatic timer for street light control single phase 230 volt maximum load 3-5 KW 25 Amp rating with hinged LID complete all as specified and directed. Make- Swadeep model No Swadeep-66-3KW1P
Supply and installation, testing, commissioning, factory made CPRI approved, outdoor type feeder pillar box, of size not less than 600mmx300x450mm made out of 3.15mm thick CRCA stainless steel sheet 415volts, 3 phase, 50Hz supply mounted on and including MS angle section 40x40x5mm thick MS frame with frant and back openable, double door with provision of locking arrangement dust proof, gasket, TPN busbar capacity 100 Ampsaa shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof, overall power coated complete all as specified and directed & consisting of the following equipment including taking out old unserviceable:- Note :- Panel board will be specially designed for sea sore are stainless steel panel board complete due to high humidity cliamte.
Incoming (i) MCCB 4 Pole, 25 KA, 200 Amps 415 Volts thermal magnertic type-01 Nos (ii) Out going MCB 16 KA 63 Amps - 03 Nos (iii) Digital Volt/Ammeter -01 (iv) Seletor switch -01 (v) RYB Indicators (vi) Single phase opreventor -01 set (vii) protection MCB 6 Amp, CT ratio 200/5A, Danger Plate, Bus bar Chamber 300 Amps 4 strip aluminium
Supply and installation, testing, commissioning, factory made CPRI approved, outdoor type feeder pillar box, of size not less than 600mmx300x450mm made out of 3.15mm thick CRCA STAINLESS STEEL SHEET 415volts, 3 phase, 50Hz supply mounted on and including MS angle section 40x40x5mm thick MS frame with frant and back openable, double door with provision of locking arrangement dust proof, gasket, TPN busbar capacity 100 Ampsaa shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof, overall power coated complete all as specified and directed & consisting of the following equipment including taking out old unserviceable:- Note :- Panel board will be specially designed for sea sore are stainless steel panel board complete due to high humidity cliamte.
Incoming (i) MCCB 4 Pole, 25 KA, 250 Amps 415 Volts thermal magnertic type-01 Nos (ii) Out going MCCB 16 KA 125 Amps - 01 Nos (iii) MCCB 16 KA 100 Amps - 02 Nos (iv) MCCB 16 KA 32 Amps - 02 Nos(v) Digital Volt/Ammeter -01 (vi) Seletor switch -01 (vii) RYB Indicators (vii) Single phase opreventor -01 set (ix) protection MCB 6 Amp , CT ratio 200/5A, Danger Plate, Bus bar Chamber 400 Amps 4 strip aluminium
Supply and installation, testing, commissioning, factory made CPRI approved, outdoor type feeder pillar box, of size not less than 600mmx300x450mm made out of 3.15mm thick CRCA STAINLESS STEEL SHEET 415volts, 3 phase, 50Hz supply mounted on and including MS angle section 40x40x5mm thick MS frame with frant and back openable, double door with provision of locking arrangement dust proof, gasket, TPN busbar capacity 100 Ampsaa shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof, overall power coated complete all as specified and directed & consisting of the following equipment including taking out old unserviceable:- Note :- Panel board will be specially designed for sea sore are stainless steel panel board complete due to high humidity cliamte .
Incoming (i) MCCB 4 Pole, 16 KA, 100 Amps 415 Volts thermal magnertic type -01 Nos (ii) Out going MCCB 16 KA 63 Amps - 01 Nos (iii) MCCB 16 KA 32 Amps - 02 Nos(iv) Digital Volt/Ammeter -01 (v) Seletor switch - 01 (vi) RYB Indicators (vii) Single phase opreventor -01 set (vii) protection MCB 6 Amp , CT ratio 200/5A, Danger Plate, Bus bar Chamber 150 Amps 4 strip aluminium
Supply and installation, testing, commissioning, factory made CPRI approved, outdoor type feeder pillar box, of size not less than 600mmx300x450mm made out of 3.15mm thick CRCA STAINLESS STEEL SHEET 415volts, 3 phase, 50Hz supply mounted on and including MS angle section 40x40x5mm thick MS frame with frant and back openable, double door with provision of locking arrangement dust proof, gasket, TPN busbar capacity 100 Ampsaa shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof, overall power coated complete all as specified and directed & consisting of the following equipment including taking out old unserviceable:- Note :- Panel board will be specially designed for sea sore are stainless steel panel board complete due to high humidity cliamte .
Incoming (i) MCCB 4 Pole, 16 KA, 250 Amps - 2 Nos 415 Volts thermal magnertic type-01 Nos (ii) Out going MCCB 16 KA 100 Amps - 02 Nos (iii) MCCB 16 KA 63 Amps - 02 Nos (iv) MCCB 16 KA 32 Amps - 02 Nos(v) Digital Volt/Ammeter -01 (vi) Seletor switch -01 (vii) RYB Indicators (viii) Single phase opreventor -01 set (ix) protection MCB 6 Amp, CT ratio 200/5A, Danger Plate, Bus bar Chamber 400 Amps 4 strip aluminium
Supply and fix LED solar post top with built in solar panel Led light and lithium battery with charge controller and 2 PIR sensors wiyh 360 degree coverage IP 65 Make- Havells cat part No-BUDZ 1W 5700K Solar Bollard light or equivalent of Philips and Crompton
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.40 MB
50PTenderDocs.pdf
Tender Documents • 0.99 MB
BOQ_835349.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid