Peventive and Breakdown maintenance of Pumps at HWPM Colony

Amount

Dismantling, handling, lifting, lowering and Over Hauling of Pump units.

Drinking water pumps DB 80/20 Kirloskar Make centrifugal pump including replacing lube oil.

Sewage Pumps along with overhauling of Line shaft Coupling - Beacon Pump / Virat Pump

'Repairing/Replacing, servicing of individual parts for the above pumps.

Replacing Line coupling shaft studs/ Rubber bushes for sewage pumps including the cost of materials like rubber bushes,pins etc.

Replacing Star-pad for Love-Joy coupling including the cost of consumable materials like Star pad, nuts, bolts, shimplates & packing materials etc.

Servicing of the line coupling shaft connected to Varat make sewage pump & motor at sewage pump house No II.

Overhauling of valves including replacement of nuts & bolts,gland packing ropes.

Inlet and out let Valves of drinking water and sewage water pump houses.

Non return Valves at drinking water and sewage water pump houses including replacement of plafer rod, inner repairs etc.

Replacement of gland packing rope as and when required for pumpsand valves.

For Driking water pumps.

For sewage water pumps.

Dismantling, lifting repairing/replacing of foot valves.

3" Foot valve and washer (Sewage water pumps)

6" Foot valve and washer (Drinking water pumps)

Periodical 'Preventive maintenance of drinking water, sewage water pump sets as per schedule.

De-coupling, dismantling, handling, lifting, lowering and Overhauling/Breakdown manitenance of Motors as per the procedure.

Motors at Drinking water Pump House - 30 kW/26kW, 3-phase induction motor.

Motors at Sewage Pump house : 3-phase Induction Motor/ 15 kW NGEF make induction motor.

Dismantling, handling, lifting, lowering, overhauling/breakdown maintenance, and assembling back the 5 to 7.5 H.P Monoblock pump-sets.

5 to 7.5 HP Monoblock ( Pump on well near B2 cluster for Central Park, Sewage water pump House, Dewatering pumps) including replacement of Star Pads etc.

5 HP Submersible pump set as above including replacement of O Ring, water seal etc.

Maintenance of motor control panel, and power panel, like cleaning the contact relays and other components complete.

Rewinding of defective/ damaged winding of Motors connected with drinking water , Sewage water pumps and Auxilary water pump motors.

36Kw/ 26 KW motors of Drinking water pump house motors.(Optional)

15 KW motors of sewage water pump house motors. (Optional)

5 - 7.5 H.P KW motors of Auxilary water pump house motors. (Optional)

Lifting, Preventive maintenance of anand sarovar fountain submersible pumps like lifting by Hydraulic Excavator (3D) with Driver and fuel.

Lifting by Escort of anand sarovar fountain submersible pumps.

Preventive maintenance for anand sarovar fountain submersible pumps

Supply and fixing of LED lighting - RGB 220V/27W, supply: ACV-240v 50/60Hz, Lamp: 27W x 6pcs spec 3W high brightness LED (3R3G3B) BFF - UW/27W body aluminum alloy top ring stainless steel 304 output power 27w luminous flux output 80/90/100 LM/W light source high power/Edison/Cree Grade - IP 68 LED auto color change / DMx512 Controllable.

Supply and fixing of Direct-on-Line Starters for 415V, 3-Ph, 15kW motor

Supply and fixing of ABB TA75DU 42A Thermal Over Load Relay

Supply and fixing at old sewege pump house 5 HP Three Phase Domestic MonoBlock Pumps make kirloskar/crompton or any equilent make as per engineer incharge. With suitable accesseries.

Supply and fixing of 80mm suction hose pipe for MonoBlock Pumps .

Supply and fixing of spares For Kirloskar DB80/20 model Drinking Water Pumps as per requirement.

Impeller (Cast Iron)

Bearing Housing (Cast Iron)

Casing Cover (Cast Iron)

Wearing Ring (Cast Iron)

Pump shaft (Carbon steel)

Shaft Sleeve (Statin less Steel)

Gland (Cast Iron)

Bearing Cover

Starpad Rubber

6204 BEARINGS

6205 BEARINGS

6206 BEARINGS

6208 BEARINGS

6209 BEARINGS

6210 BEARINGS

6304 BEARINGS

6305 BEARINGS

6306 BEARINGS

6307 BEARINGS

6308 BEARINGS

6309 BEARINGS

6310 BEARINGS

6313 BEARINGS

6314 BEARINGS

MS 13 1/2 V3 BEARINGS

MS 13 V3 BEARINGS

NU214 BEARINGS

NU 322 BEARINGS (DG Set)

6324 ROLLER BEARINGS (DG Set)

3 Inch Foot Valve

Supply and fixing of following Spares for Sewage Pumps as per requirement.

Screw for wearing ring

Locking bolt for Im peller AIS 1410

Grub Screw for locking bolt

Impeller Key

Inspection Cover CI IS 210 FG 200

Gland Flange CI IS 210 FG200

Stud with Nut IS 1367 GR4.6

Shaft Sleeve (Statin less Steel) AIS 1410

Sleeve Stop Peg ss304

Water Deflector (Nuprene Rubber)

Grub Screw for coupling

Coupling Key

Coupling Bush (Rubber)

Grease Cap

Bearing Lock Nut

L190 Lov Joy Coupling

M/s K S EVEREST ENGINEERING WORKS