SPL REPAIR AT OTM ACCN BLDG NO. P-148 (OR) LINE OF 136 FD REGT AT GE CLEMENT TOWN

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L for brick work with sub class "B" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed.

M & L for old size brick work with sub class B bricks straight or curved on plan exc 6m mean radius in CM 1:6 completed all as specified and directed.

Taking down cement plaster any description on brick or stone walls or RCC roofs/ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of brick works in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete.

M&L for rendering 25 mm thick in two layers on other than fair faces of brick or concrete surfaces/chajja with first layer of 10mm thick in CM 1:3 over cement slurry on openend reinforcement and second layer of 15 mm thick in CM 1:4 finishing even and smooth without using extra cement complete all as specified and as directed .

M&L for preparation of new plastered surfaces of walls or concrete and applying 1 mm thick wall care Putty on walls and two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparing new plastered surfaces of walls, Facias, cornices etc and apply two coats of Cement based paint of white or red colour over a coat of white wash Complete all as specified and directed.

M&L three coats of white wash on new plastered ceiling surface including preparation of surfaces.

M&L for removal of existing treatment over wall and applying 2 mm thick wall care Putty on walls and applying two coats of oil bound distemper on wall over a coat of primer on old surfaces complete all as specified and directed.

M&L for removal of existing treatment over wall and applying two coats of Cement based paint of white or red colour over a coat of whitewash on wallls, concrete surfaces etc. Complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceilings and apply two coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and apply two coats of white wash complete all as specified and directed

M&L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhats or frames n.exc 1.50 Sqm removing to or from store and refixing in same opening after necesssary welding,repairing, oiling & greasing to make the window shutter function smoothly completely all as specified and directed.

Running welding in repairs of metal not exc. 6mm thick for making it smooth functional complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F 35 mm thick FACTORY MADE Wire Mesh Solid WPC Pre-laminated both side DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings. complete all as specified and directed

Dismantling Boarding any description fixed in any position with nails complete all as specified and directed.

S & F 18 mm thick with min density 600 Kg / Cum LEAD FREE PVC/WPC board of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S & F 18 mm thick with min density 600 Kg / cum LEAD FREE PVC/WPC board of single side rigid prelaminated of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed.

S&F three track Pre coated Steel Sliding Window System fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 “D” quality, galvanized as per IS 277 with Zinc of 120 grams/ Sq. Mtr.) with total coated thickness of 0.58 mm or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Windows Section for three track external frame should be of 44 x 107mm , Section for window glass shutter should be of 36 x 50 mm, if required Section for shutter horizontal mullion should be 22mm x 60mm, The windows should be paneled with 5mm thick Plain Float glass Gaskets are to be made with Ethyl Propylene Diamine Manomer (EPDM). Corner brackets for internal and external frame made of Polypropylene. Touch lock to be provided for window shuttes Sections are to be cut to length, joined and assembled by means of corner brackets. The above Frame should be fixed to brick/ concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames.Windows shall be provided with fixed Stainless steel 32gauge wire mesh/gauze of 304grade with 144 holes per square inch for mosquito proofing with the help of nut, bolt and flat iron of 20x3mm size on top and Grill made of 10mm MS Square bars welded to 25x4mm angle iron . Distance between bars should not be more than 125mm centre to centre. Total Grill and wire mess unit shall be powder coated.Assembling and installation of windows and ventilators shall be all as per details shown/mentioned on drawings and as per manufacturer‟s instructions.

S&F Pre coated Steel fixed type Window/ ventilator with movable louvers of 4 mm th frosted glass and handle to operate louvers fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 “D” quality, galvanized as per IS 277 with Zinc of 120 grams/ Sq. Mtr.) with total coated thickness of 0.58 mm or Powder Coated with pure Polyester Powder up to 50-60 microns thick. The windows should be paneled with 5mm thick frosted glass Gaskets are to be made with Ethyl Propylene Diamine Manomer (EPDM). Corner brackets for internal and external frame made of Polypropylene. The above Frame should be fixed to brick/ concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames. Windows shall be provided with Grill made of 10mm MS Square bars welded to 20x4mm angle iron . Distance between bars should not be more than 110mm centre to centre horizontal way. Assembling and installation of windows and ventilators shall be all as per details shown/mentioned on drawings and as per manufacturer‟s instructions complete all as specified and as directed

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete

S & F hasp and staples, size 150 mm, safety type, stainless steel type with hinge pin including bolt to hinge plate and fixed with screws, Complete all as specified and directed

S & F Auto closing hinges 35 mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified and directed.

S & F magnet catcher suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed.

S&F in repair 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 300 mm long Stainless Steel sliding door bolt bright finish of heavy quality with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 150 mm complete all as specified and directed.

S&F in repair for 25mm dia Stainless Steel Curtain Rod with SS brackets and decorative type SS knobs on both ends incl T/D of any type old curtain rods and making good disturbed surfaces with cement mortar or putty complete all as specified and directed

S&F 100 mm long Stainless Steel butt hinges medium weight complete all as specified and directed.

S&F 150 mm size Stainless steel handles heavy weight of good quality complete all as specified and directed.

S&F 200 mm long Stainless steel barrel tower bolts heavy weight of good quality complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) form wooden frames or steel,Alu, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 4 mm thick plain sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Taking down existing water proofing treatment/membrane of any type and Cleaning the surface of roof, palstered surfaces etc by roughening, picking, sweeping clean and washing down with water to remove all loose dirt etc complete all as specified.

M&L for water proofing treatment to roof surface complete all as specified & directed by Engr-in-Charge laid with following course of descrition below :- :- (a) Apply evenly bituminous based primer confirming to IS: 3384-1965 @ 0.30 kg/sqm. (b) APP modified bituminous membrane 3mm thick with non woven polyester core of weight not less than 3.2 to 3.5 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm in longitudinal and transverse direction shall be sealed/fused by flame torch application as per manufacturer instructions. membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (c) Applying aluminium paint over membrane @ 0.20 Kgs/Sqm in two coats over APP membrane

M&L for 40 mm thick cement concrete 1:2:4 type B-0 (20 mm graded stone aggregate) over RCC roof surface finished even and smooth using extra cement including necessary form work

M&L for rendering 15 mm thick in CM 1:4 as in roof surface with integral water proofing compound @ 3% by the weight of cement in CM 1:4 complete all as specified & directed.

M&L for preparation of existing sunken floor treatment incl plaster and removal of all debris with the following specification and sequence complete all directed by Engr-In-Chrg (a) Cleaning internal surface areas of sunken thoroughly with help of wire brushes & removing all dirt & loose materials with help of air blower by various mechanical/manual means. (b) Providing and making fillets or gola at the junction of the walls and the slabs using CM 1:4. (c) Applying one coat of SBR latex based primer on floor and walls of sunken portion (d) Applying finishing coat of SBR latex primer mixed with cement, sand & water (Slurry coating ratio- 1:2:2:1 on floor and wall of sunken portion. (e) Applying 1st coat of highly elastomeric two component waterproofing coating on floor and wall of sunken portion all as per manufacturer instructions. (f) Applying 2nd coat of highly elastomeric two component waterproofing coating on floor and wall of sunken portion all as per manufacturer instructions. (g) Laying protection plaster 15mm th. in CM 1:4 on floor and wall.

Demolition of cement concrete unreinforced in ground floor or above ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in filling of sunken floor etc and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L 75 mm thick PCC 1:2:4, type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth with out using extra cement all as specified.(Note- Joint 12 mm wide to the full depth of pcc shall be provided at every 3 metres and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. cost of this provision shall be deemed to be included in the quated rate for concrete in plinth protection

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for Machine cut kota stone slab flooring mirror finished 18-20 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:6, including rubbing and polishing incl demolition of cement concrete 40 mm thick as in floor complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 18-20 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 10 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for Non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300 x 450 x 7-8 mm thick on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed.

M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and incl 15 mm thick screed bed in cement mortor 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situationscomplete all as specified and directed.

M&L Pre-polished Baroda green marble 16-18 mm thick (table rubbed and polished) in steps (single piece), jambs, pillars , window cills, cooking platforms & in riser of steps and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe (where required) over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in surface channels and drains incl necessary form work complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position such as tank staging on roof,broken chajja etc. not otherwise specifically provided for complete all as specified and directed

M&L for RCC 1:2:4 (Nominal mix) type B-1 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 25mm bore of pipe complete all as specified and directed.

Supplying and laying of 25mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings,and brass fittings as required fixed on walls/ceiling or laid in floors, etc, incl cutting chases for concealed water tubing in brick walls and making good with CM 1:3 complete all as specified and directed.

S & F 25 mm dia GI tube medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed

S&F CPVC Brass FT Elbow (20/15) 20 mm bore dia complete all as specified and directed.

S&F CPVC Brass Male Brass Threaded Adaptor (MTA/ MBTA) (25 mmx25mm) bore dia complete all as specified and directed.

S&F CPVC Brass Female Brass Threaded Adaptor (FTA/ FBTA) (25 mmx25mm) bore dia complete all as specified and directed.

S&F CPVC Brass Male Brass Threaded Adaptor (MTA/ MBTA) 20/15 mm bore dia complete all as specified and directed.

S&F CPVC Brass Female Brass Threaded Adaptor (FTA/ FBTA) 20/15 mm bore dia complete all as specified and directed.

S&F in repair long body bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed.

S&F in repair two way bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed.

S&F in repair 15 mm fancy type pillar taps table mounted long body swan neck type chromium plated cast copper alloy with operating knob quarter turn type high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts screwed for iron/CPVC pipe and fixed complete as directed by Engineer-in-Charge.

S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge.

S&F in repair 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.

S & F in repairs 25mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed.

S & F in repair vitreous china counter below wash basin oval type size 560x400x205 mm, white, fixed on Granite/Marble or other appropriate top coloured including chromium plated waste coupling, PVC connection and waste pipe complete all as specified.

S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest including concrete bedding & including P or S trap 100mm complete all as directed by Engr-in-Chrg

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, incl 'P' or 'S' trap and plastic water closet seat cover, black, closed pattern with flat bottom and cover & MS chromium plated or aluminised hinging device, complete all as directed by Engr-in-Chrg

S & F in repairs Vitreous China urinals, half stall type white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with inlet, ball valve, float and handle internal fitting, push button operated type with and including brackets etc complete.

S/F in repair health faucet with flex pipe and hand shover ,the length of hose 1.50 mtr fitted to the tap.complete all as specified

S & F in repairs Brass chromium plated shower rose 125mm size complete all as specified and directed

S&F Iin repair CP Grating doom 75/110 mm dia incl jointing with solvent cement complete all as specified and directed.

S&F in repair CP brass towel rail `20 mm dia D’ type 60Cm long fixed to wall all as spd and directed by Engr-in-Charge

S&F in repair CP brass towel ring 125 mm dia fixed to wall all as spd and directed by Engr-in-Charge

S&F in repair CP Soap dish any type fixed to wall with chromoium plated brass screw. Complete all as specified and directed.

S & F in repair corner glass self set of 300mm radius with 10mm thick glass with CP railing with bracket & Fixed with brass screw complete all as specified and directed .

S & F in repair 32 mm dia HDPE flush pipe for cistern etc. of pressure rating 6 kgf/sq. cm complete.

M&L 32mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as in repairs

S&F in repair 75/110 mm PVC (SWR) floor trap with grating including jointing with solvent cement. Complete all as specified and directed

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete,PVC ) set in cement mortor for any size & type complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or in walls of 40 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 75 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) branch piece single (single Y) equal or unequal of 75 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) branch piece single (single Y) equal or unequal of 110 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and directed.

Dismantling PVC water tanks exc 500 ltr but not exc 1000 ltr capacity and removing to store complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified complete

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F Welded steel wire fabric weight n exc 4kg/sqm welded,tied and fixed to wood or steel members complete all as specified.

Disconnecting the electrification and taking down DBs (any type of SPN DBs) and making good to the disturbed surfaces to match the existing surface all as specified and as directed by EIC. Note - Temporary power supply shall be provided by contractor.

Taking down U/S submain wiring aluminium etc and making good the disturbed surfaces of walls/ floor etc matching with the existing surface.

M&L for sub-main wiring (concealed) with two single core 6 sq mm FRLSH PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of massinory including 25 mm dia non-metallic PVC conduit fixed in wall including 6 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by EIC.

Taking down carefully aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pedants, regulators, sockets, light fitting etc.. and making good the disturbed surfaces of walls/ floor etc matching with the existing surface all as specified and as directed by EIC.

One light point controlled by one switch.

One ceiling fan point controlled by one switch.

One exhaust fan pointcontrolled by one switch.

One 3 pin socket outlet 5 Amps on the same board.

One 3 pin socket out let 5 Amps on the independent board.

All as per Item No. 118 above but 2.5 Sq mm multi stranded copper conductor with 2.5 Sq mm copper earth continuity wire connected to earth duly complete for one 15A Socket on Independent board all as specified and as directed by EIC.

Supply and fixing surface & wall mounted LED batten 4 feet with 1x20 Watt indoor decorative luminaries with and including electronic driver and 1x20 watt LED Lamp, pre-wired including necessary electric connection with copper flexible PVC cable of 0.50 Sq mm 3 core not more than 1 mtr in length from ceiling rose/connector to light fitting complete all as specified and directed.

S & F angle lamp holder, PVC Polycab type with back plate suitable for batten fittings complete including fixing of 9/10 watt LED bulb all as specified.

Supply and fixing step socket type modular fan regulator 120/280 V , 100Watt all as specified and as directed.

Supply and fixing modular socket, 6A -2/3 pin combined 2 module ISI marked 230 volts, 50 Hz all as specified and directed by Engr- in-charge.

S & F Switch Modular single pole, one way 6 Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge.

Supply and fixing modular socket, 6A/16A -2/3 pin combined 2 module 230 volts 50 hz all as specified and directed by Engr- in-charge.

Supply and fixing switch modular , one-way 16Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge.

M & L for ceiling rose, surface bakelite, 65 x 50 mm, three terminals all as specified and as directed.

S & F sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

S & F sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 4way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

S & F MCBs TPN 63 amps, 415 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

S & F MCBs SPN 32 amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

S & F MCB SP, 6 to 40 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

M & L for Earthing complete with galvanised steel pipe electrode, 600 x 600 x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to galvanised earthing lead of 4 mm dia of iron or steel wire all as shown in electrical plate No. 5 all as specified and as directed. Note :- the cost of excavation and earth work PCC pit and CI cover funnel & watering pipe, wiremesh, charcoal dust and common salt shall be deemed included in the unit rate for earthing all as specified and as directed by EIC.

Taking down old unserviceable existing service/UG cable all as specified and as directed by EIC.

Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 35 sqmm ,3.5 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers etc and testing complete all as specified and directed.

Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 10 sqmm ,4 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers etc and testing complete all as specified and directed.

S& F Ceiling fan complete with copper winding ,blades ,down rodss, with all accessories 230 v0lt,1200mm sweep,min delivery 210/215 CFM with service value 6.00 , BEE. Five star rated with BLDC complete with out remote incl taking out old unser & deposited to E/M store yard all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

M & L for 50mm bore GI pipe (Light grade) laid under road or fixed with pole/wall of culvert as in protection of UG cable incl necessary MS clamp and complete all as specified and directed.

M & L for LED Bldg Security light Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.inc bracket made out of GI pipe 1.0 Mtr long, 32 mm dia medium grade bent to shape as directed including clamps made out of 40 mm x 6 mm flat for fixing bracket suitable for steel tubular poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide/primer all as specified and as directed.

M&L for sub-main wiring concealed/surface conduit with 4x core 10 sq mm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of massinory including 40 mm dia non-metallic PVC conduit MMS fixed in wall including 1x 10 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete for Solar Plant from GF to Top floor inc taking out old unser alumn sub main all as specified and as directed by EIC.

S&F Electric Water heater,Shock-Resistance & Rust-proof engineering thermoplastic body and heating element up to 2KW , Cap :35 Ltr , BEE 5 Star rated complete with all accessories such as safety valve ,thermostate,NRV ,Connection piece complete incl taking out old unser & deposited to E/M store yard all as specified and directed.

Supply & fixing Exhaust fan , Steel body, Metallic gray, AC single phase ,230 Volt of size 380 mm sweep,1400 RPM ,1710 CMH.90 W and Above with blades,frame and louvers incl taking out the u/s C/Fan with deposited to E/M Store yard all as specified & as directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

Please Enable Macros to View BoQ information