RequiredOEM Authorization Certificate Bid to RA enabled Yes Safety Footwear - BIS Specification ( 217 pairs ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) SPECIFICATION Technical Specification of the Product Personal Protective Equipment - Safety Footwear as per BIS specification No IS 15298 ( Part 2 ): 2016
RequiredLatest Personal Protective Equipment - Safety Footwear as per BIS specification No IS 15298 ( Part 2 ): 2016
RequiredLatest
RequiredPersonal Protective Equipment - Safety Footwear as per BIS specification No IS 15298 ( Part 2 ): 2016
RequiredLatest along with Dte. General of Mines Safety (DGMS) approval 1/5 Specification has been seen and Understood Yes * CERTIFICATION BIS Certification Yes Yes
RequiredNo CM/L No if BIS marked - * UTILITY Utility Men Men
RequiredWomen CLASSIFICATION Classification Class I ( Footwear made from leather and other materials
Requiredexcluding all-rubber or all-polymeric footwear ) Class I ( Footwear made from leather and other materials
Requiredexcluding all-rubber or all-polymeric footwear ) DESIGN Design A ( Low shoe ) A ( Low shoe ) PATTERN Pattern Derby * SIZE Size 8 5
Required6
Required7
Required8
Required9
Required10
Required11
Required12
Required13 MASS Mass of one pair of Footwear ( gram ) - * Material Upper for Class 1 Footwear Leather Leather Surface Finish of Upper Leather for Class 1 Footwear Full Grain Upper Leather Buff Barton Print
RequiredZuggrain Print
RequiredFull Grain Upper Leather
RequiredCorrected Grain Upper Leather
RequiredNot applicable Material for Class II Footwear All Polyurethane All Polyurethane Any other Polymeric Material for Class II Footwear - * Vamp Lining With ( Classification I and Classification II Footwear ) With ( Classification I and Classification II Footwear )
RequiredWithout ( Classification II Footwear ) Vamp Lining Material Textile Leather
RequiredTextile
RequiredCoated Fabric
RequiredNot Applicable Quarter Lining Yes Yes
RequiredNo Quarter Lining Material Textile Leather
RequiredTextile
RequiredCoated Fabric
RequiredNot Applicable Toe Cap ( Steel ) Metallic ( Steel ) Metallic COLOUR Colour Black * Any other Colour as per buyer's requirements - * OTHER REQUIREMENTS Insole Yes Yes
RequiredNo Insocks Full Insocks Non No Insocks
RequiredSeat 2/5 Removable Insock
RequiredFull Insocks Non Removable
RequiredFull Insocks Removable and water permeable
RequiredFull Insocks Removable and not water permeable Tongue ( For Designation I Footwear ) Full Bellow Tongue Full Bellow Tongue
RequiredNo
RequiredNot Applicable for Designation II Footwear Collar Collar with PU Foam padding
Required15 mm thick
Requireddensity 40 kg per cubic meter Collar with PU Foam padding
Required15 mm thick
Requireddensity 25 kg per cubic meter
RequiredCollar with PU Foam padding
Required15 mm thick
Requireddensity 40 kg per cubic meter
RequiredCollar with PU Foam padding
Required15 mm thick
Requireddensity 60 kg per cubic meter
RequiredCollar with PU Foam padding
Required12 mm thick
Requireddensity 25 kg per cubic meter
RequiredCollar with PU Foam padding
Required12 mm thick
Requireddensity 40 kg per cubic meter
RequiredCollar with PU Foam padding
Required12 mm thick
Requireddensity 60 kg per cubic meter
RequiredWithout LACING/CLOSING OF SHOES Closing ( Tieing ) Laces Laces Lacing of Shoes Eyelets Holes without Eyelets
RequiredEyelets
RequiredNot applicable for Boots without Laces Eyelets ( Pairs ) 4 pairs 4 pairs
Required5 pairs
Required6 pairs
RequiredNot applicable for Boots without Laces Eyelets Material of Eyelets Brass Eyelets Brass Eyelets
RequiredAluminium
RequiredPowder Coated "D"type steel ring eyelets
Requiredriveted Laces Nylon * Cross Section Shape of Laces Round * Breaking Load of Laces ( min ) 600 N * Length of Laces 90 cm * SOLE Sole Description Material Direct Moulded Single Density Polyurethane Direct Moulded Single Density Polyurethane If Any Other Material of - * 3/5 Sole Sole Design Cleated Cleated
RequiredNon Cleated Construction Single Multi layer
RequiredSingle SLIP RESISTANT Slip Resistant As per clause 5.3.5.2 of IS 15298 ( Part 2 )- Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution As per clause 5.3.5.2 of IS 15298 ( Part 2 )- Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution ADDITIONAL REQUIREMENTS FOR SPECIAL APPLICATIONS- WHOLE FOOTWEAR Additional Requirements for Special Applications- Whole Footwear Water resistance
RequiredCut resistance * ADDITIONAL REQUIREMENTS FOR SPECIAL APPLICATIONS ( UPPER ) Water penetration and absorption No Yes
RequiredNo ADDITIONAL REQUIREMENTS FOR SPECIAL APPLICATIONS ( OUTSOLE ) Additional Requirements for Special Applications- Outsole Resistance to hot contact
RequiredResistance to fuel oil Resistance to hot contact
RequiredResistance to fuel oil LOGO AND MARKING Logo/Totem Emblem Marking As per buyer's requirements As per buyer's requirements
RequiredNo Size
Requireddesign
RequiredType and Location of Logo as per buyer's requirement - * Test Report Availability of Test Report from Designated AHSP NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification Yes Yes
RequiredNo Name of the Lab - * Address of the Lab - * Test Report No - * Test Report Date - * Test reports to be furnished to buyer on demand
Requiredif claimed to be available Yes * ADVANCE SAMPLE Agree to provide Advance Sample(s) for buyer's approval before commencement of supply Yes Yes 4/5 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
