Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.5 LAccepted-AOC GROUND FLOOR THAKUR COMPLEX BASANTPUR | BASANTPUR | SHIMLA | HIMACHAL PRADESH | 171018 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹7.8 L+₹26,273.66 (3.48%)Accepted-AOC | L2 | Accepted-AOC Not Accepted |
Tender Value
₹7.1 L
EMD Value
₹15,000
Closing Date
8 Jun 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
HPPWD Division Office Dharampur
C.o one No class Room
2023_PWD_74381_1
PW-DPD-CB-Tender-2392-Dt -24.05.2023
Open Tender
Civil Works - Buildings
Item Rate
270 days
Dharampur
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,500
Yes
₹15,000
5 Sept 2023
2 Jun 2023
9 Jun 2023
2 Jun 2023
8 Jun 2023
2 Jun 2023
Amount
Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
In columns, pillars posts and struts square rectangular or polygonal in plan.
In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in nall depth /height not exceeding 1 (one) metre depths upto all floor levels
Providing and laying Reinforced cement concrete mechnically mixed vibrated design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents not less then 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix and curring complete, for attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level to all floor levels excluding cost of centring shuttering finishing including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and laying HYSD bars Fe 500D made of SAIL,TISCO/JINDAL PANTHER for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding including the cost of binding bars all complete upto all level including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five) in superstructure above plinth level upto all floor level in all shapes and size in cement mortar 1:6 (one cement : six coarse sand) curing complete including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory window including black enamelled iron butt hinges with necessary screws.40mm ( Forty milimetres) thick 2nd class Deodar wood including fixing complete and carriage of materials within all leads and lifts and other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
Providing 40x3 (Forty into three millimetres) flat iron hold fast 40(Forty) centrimetres Long including fixing to frame with 10(Ten) millimetres diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15 ( Thirty into ten into fifteen) centimetres. 1:3:6 ( one cement : three sand: six graded/crushed stone aggregate 20(twenty millimetres) nominal size including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
Providing and fixing 300×16mm (Three hundred into sixteen millimetre) nominal size anodized aluminium sliding door bolts anodized / powder coated colour or shade with bolts and nuts etcetera complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and fixing aluminium tower bolts (barrel type) anodized/ powder coated transparent or dyed to required shade and colour with screws upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
250x10mm (Two hundred fifty into ten millimetres)
Providing and fixing aluminium handles anodized/ powder coated transparent or dyed to required colour and shade with necessary screws etcetere complete. upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
125mm (one hundred twenty five millimetres)
Providing and laying full body antiskid vitrified floor tiles of size 600x600 (Six hundred into six hundred millimeters) with water absorption less than 0.08% and conforming to IS: 15622, of approved make omany/Kajaria/Nitco /Orient RAK, Johnson & Johnson) in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey ement slurry @ 3.3 kg/ sqm (three point three killogramme per square meters) including grouting the joints with white cement and matching pigments etc., complete upto all floor level in all heights including entire carriage of aterial with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and fixing 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet roofing as per structure design through profile coloured quoted high tensile steel zink allimimun alloy coating sttel roofing with trapezol corrugation of maxium ptich 90( ninety) millimetres centre to centre and minium depth of 30mm ( Thirty millimetres) with returned LEG and sealant groovs for proper sideoverlap single sheet to be provided up to 10 Mtrs ( Ten millimetres) from ridge to eves for avoiding ends overlaps and fixing of sheet be with self drilling and self tapping galvanised or zink alloy coated fasteners of size 5.5mm (Five point five millimetres) dia 5.5mm (Five point five millimetres) length with EPDM seal complete with all accesories as required as per direction of Engineer-in-Charge in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
Providing and fixing ridges or hips 60cm (Sixty centimetres) overall with 0.60mm) Zero point six zero millimetres) thick prepainted steel sheets made of TATA/JINDAL Make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washer complete with all accessories as required including entire carriage of material with in all leads and lifts in all heights and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
Providing and fixing 15(Fifteen) millimetres wide 45(forty five) millimetres overall semicircular plain GI sheet gutter with iron brackets 40X3(forty into three) millimetres size bolts and nutts and washers etc including making necessary connections with rain water pipe complete as per design in 0.63 mm ( Zero point six three millilmetres thick sheet , including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
Providing and fixing M.S. BP Sheet 1.66 mm to 2.00 mm (One point six to two Millimetres) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely). including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
Providing and fixing on wall face unplasticised Rigid PVC 110mm ( one hundred ten milimetre ) (Finolex/Supreme confirming to IS 13592) for rain water pipes of working pressure not less than 4.00 kg/square centimetre ( four point zero zero kilogram per square centimetre ) including filling the joints with approved adhesive complete upto all floor level in all heights including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid uPVC rain water pipes Supreme, AKG, Finolex, Prince, Kisan, SFMC, Diplast conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals.
110mm (One hundred ten millimetres) nominal size PVC bend
110mm (One hundred ten millimetres) nominal size PVC Shoe
Providing and fixing 110 mm ( one hundred ten millimetre) unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre)hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete upto all heights complete including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
Steel work in built up tubular sectionsmade of TATA SAIL/JSW/APPOLLO(round, square or rectangular hollow pipes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete upto all floor level in all heightscomplete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. .
Providing and fixing glass pane shutter in Z- section clear glass panel 4mm thick for doors, windows and clearestory windows including galvanised power coating steel section glass bead should be 5x25x0.58mm of approved quality and shape section with necessary steel screws inluding applying a priming coat of red lead paint complete as per approved specification / design including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( One cement :three coarse sand) upto all floor level upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
15mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
15mm (Fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers, and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights and curing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Applying Birla white wall care putty 1 mm ( one millimetre) thick over plastered surface after thoroughly brushing the surface free from mortar droops, dust, loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Distempering two coats with oil bound washable distemper of approved brand and manufacture of required shade over andincluding of priming coat with alkli resistance primer of approaved brand and manufacture of paints ASIAN/NEROLAC after thoroughly brushing the surface free from mortor dropping and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor level in all heights upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Finishing wall with weather proof exterior grade emulsion of approved design (Apex Ultima, Asian Paints on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine liters per ten square metre)over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eight liters per ten square metre) of approved brand and manufacture ASIAN PAINTS/NEROLAC make including cleaning the surface of all dirt dust and other forign metter complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Applying one or more coats of wood primer with ready mixed pink or Grey primer of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar make on new wood surgace after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine liters per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm(zero point seven five liters per ten square metre) of approved brand and manufacture of Asian Paints /Nerolac make including cleaning of all dirt, dust and other foreign matter sand papering and stopping complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Manju Devi
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .