Shifting work against Deposit Work under EDD-2, 3 Nanpara Kaiserganj on Turn Key Basis

Amount

All Materials Provided by the Contractor as per Resspo Norms PART-A (Supply)

PCC Pole 9 Mtr long

PCC Pole 8.5 Mtr long

ST Pole 11 Mtr. Long

Stone Pad

11 KV 'V' Type Steel X-Arm

Tee off Channel

11 KV Pin Insulator with Pin

11 KV Disc Insulator with Fitting

ACSR Weasel Conductor

Stay Set Complete

Earthing Complete

GI Wire 6 SWG

GI WIre 10 SWG

GI Barbed Wire

Sub Station Base Angle

MS Channel Dropper

Top Channel

AB Cable 3x50+1x35+1x16mm2

AB Cable 1x16x1x25 mm2

MS Top Channel 125x65mm2

Croos Braching Angle 50x50x6mm

11 KV XLPE Cable 3x120sqmm

Cable Jointing Kit

33 KV Disc Insulator B&S Type

33 KV Disc Fitting 7000KG

33 KV Pin Insulator

33 KV Pin with Nut

33 KV XLPE Cable 3x300sqmm

Stay Set Complete 20x1800mm

Cable Jointing Kit O/D

Distribution Box

Clamp for Top, Tee Drop, Guard etc

V-Type X-Arm Holding Clamp

Gaurding X-Arm

Danger Board, No-Plate Bolt with

F-Bracket Clamp

LT Clamp with Eye Hook

Suspension Clamp

Pieresing Clamp

Dead End Clamp

Clamp for DB

PP Clamp

Clamp for T-off

Clamp with Nuts & Bolts

Clamp for G.I. Pipe

E-Bracket with Nuts

MS Nut & Bolt

CI Pipe 10"

GI Pipe

PART-B (Erection Work)

Fabrication & Erection of Single PCC Pole (9 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site with complete fitting. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Fabrication & Erection of Single PCC Pole (8.5 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site with complete fitting. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Fabrication & Erection of Single ST Pole (11 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site with complete fitting. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Fabrication & Erection of Double ST Pole (11 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms.

Fabrication & Erection of Four ST Pole (11 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms.

Grouting of Poles with 1:4:8 CC ratio of cement, sand & brick ballast, backfilling of pits with mud completely. (All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Supply, Grouting nozzling & binding of stay sets with stay clamp complete fittings. (All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Earthing of Pole as per RESSPO Norms.

Laying of Double circuit 11 KV 3x120 XLPE sq.mm Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks with Complete Fitting.

Laying of Double circuit 33 KV 3x300 XLPE sq.mm Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks with Complete Fitting.

Errection & Commissioning of AB cable 1x16+1x25mm2 including complete fitting of Accessories (All Accessories shall be Provided by the Contractor).

Errection & Commissioning of AB cable 3x50mm2 including complete fitting of Accessories (All Accessories shall be Provided by the Contractor).

Laying, stringing, sagging, binding & jumpering of conductors of 3 phase, 4 wire guard wire GI 6 SWG & 10 SWG with the help of necessory clamp and binding wire proper connector & Clamp (Complete Fitting.)

Fixing of Cable Jointing kit

Fixing of Cable Jointing kit O/D

High Pressure testing of 33 KV & 11 KV XLPE cable, Testing equipment will be arranged by the contractor.

Dismentling of Old HT/LT line with loading & unloading from site to store

Carriage of old & used recvied back material from side to store

Fitting of Three Phase Distribution Box

M/S SMM INFRATECH PVT Ltd