Construction work of 30m span Double Lane Steel Plate Girder Motor Bridge in Km 43 and 48m span Double Lane Steel Truss Motor Bridge in Km 67 of Bikhyasain Deghat Bungidhar Mehalchori Bachuwaban Chokhutiya state highway (SH-33) in District Pauri.

Construction of 30 m Double lane Steel Girder Motor Bridge at Km 43 of SH 33 (Bridge ID 3012)

APPROACH ROAD WORK (Bridge ID 3012)

Excavation in foundation for retaining & breast walls, in all types of soils and rock including all lead, lift and disposal of surplus material as per direction of engineer- in- charge.

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. P.C.C grade M 15, Nominal mix (1:2.5:5)

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 20 Nominal mix (1:2:4)

Hand Packed stone filling in back of walls including cost of all materials, royality.T&P etc. complete as per direction of engineer- in- charge.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Construction of Embankment with Material Obtained from Roadway Cutting Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5

Type - A, "W" : Metal Beam Crash Barrier. (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/ road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 (if Concrete Required for Vertical post Fixing will be paid extra)