Repairs to sluices embankment of Bongha filling and Jungle clearance of Vitlapur Tank near Ramsagar village

Name of work :- Repairs to sluices embankment of Bongha filling and Jungle clearance of Vitlapur Tank near Ramsagar village

It. No Item of work UNIT QUANTITY RATE AMOUNT

1 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. etc complete with all lead and lift as directed by Engineer in charge. Sqm 11766.59 5.08 59797.79

2 Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selected earth, and all other ancillary operations complete. Each 427.35 71.40 30512.79

3 Providing and constructing coursed rubble (size stone) face stone masonry in CM 1 : 4 proportion by volume with stones from approved source including cost of all materials, machinery, labour, ramps,cleaning, batching and mixing mortar, packing mortar and wedging stone chips into joints, finishing, curing and all other ancillary operations complete with all leads and lifts upto 1.5 m. (Second sort) Note: For every 1.5 m additional lift beyond 1.5 m from surface, add Rs.102.00/m3 m3 26.51 4696.65 124528.86

4 Providing cement mortar pointing to coursed rubble (size stone) face stone masonry in CM 1:2 proportion by volume including cost of all materials, labour, raking and cleaning joints for 50 mm depth, batching and mixing mortar, pressing mortar into joints, finishing, curing and all other ancillary operations complete. M2 38.09 201.60 7678.94

5 Providing and laying insitu vibrated M-15 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for side lining of canal including cost of all materials, machinery, labour,cleaning, batching, mixing, formwork, supports, placing in position, levelling, vibrating, finishing junction of bed and sides to required curvature, finishing side slopes, curing with all other ancillary operations complete. m3 10.38 8605.80 89321.75

6 Providing hearting embankment using selected impervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, leveling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations complete m3 97.35 538.65 52436.23

7 Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate (with top seal) consisting of skin plate, siffeners, horizontal and vertical girders, wheels, guide rollers, rubber seals with all accessories for canal escape / regulator vent including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, applying one coat of zinc rich epoxy primer and three coats of cold applied coal tar epoxy paint, seal fixing and all other ancillary operations complete as per specifications and approved drawings. tonne 0.31 185325.00 57696.86

TOTAL 421,973.23 GST @ 18%

I agree to carry out the above cited work at _______ % in words__________________________________ above/below the estimated Rate indicated in the Schedule-B.

Name of work :- Repairs to dislodged trough portion from km 0.00 to 1.00 in selected reaches of Distributory 1A under RBHLC

It. No Item of work UNIT QUANTITY RATE AMOUNT

1 Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² Sqm 595.30 922.95 549432.14

2 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. Kg 2236.99 118.65 265418.86

3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. m3 4.81 6493.20 31250.15

TOTAL 846,101.15 GST @ 18% Round off Total

Executive Engineer 761280.46

KNNL, No-1 T. R. Division 137,031.00

Munirabad 898311.46