Building

Name of Work: New Construction of Vaccine store (Ground Floor) at Surrendranagar dist -Surendrangar

NBO NO. QTY Item Description In Figurs Unit Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

04001A / P - useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Rupees One Hundred Seventeen and Paise

00. Loose or soft soil Eight only

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out

04002A / P - Rupees One Hundred Twenty Nine and Paise

2 165.0 and stacking of useful materials and disposing off the excavated stuff upto 50 129.81 Cum

00. Eighty One only

Meter lead.(A) Loose or soft soil

Filling available excavated Earth (Excluding Rock) in trench plinthside of foundation

Rupees One Hundred Thirty and Paise

3 4006 / P - 00. 634.0 etc. in layer not exceeding 20 cm in depth consolidation each deposited layer by 130.39 Cum

Thirty Nine only

ramming and watering etc. complete.

04008A / P - Filling in foundation and plinth with murrum or selected soil in layers of 20 cm Rupees Two Hundred Eighty Two and Paise

4 1838.0 Thickness including watering, ramming and consolidating etc. complete. 282.02 Cum

04007A / P - Filling in plinth with sand under floors including watering, ramming consolidating Rupees Four Hundred Twenty Four and

5 165.0 and dressing etc. complete. 424.90 Cum

00. Paise Ninty only

Anti-Termite System: Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control treatment including labour

and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles Rupees Fifty Six and Paise Sixty Three

6 22007, P.00 878.0 20 EC. As Per 6131_paret-II Consentration Weight one percent is recommended i.e 56.63 Sqm

one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of

one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

RUBBLE SOILING : Providing and Spreading Rubble Solling in 20 TO 23 CM Thick

Rupees One Thousand Three Hundred Ninty

7 R.A 25.0 layers including hand packing and compacting,Royalty Charges Etc completed 1392.79 Cum

Two and Paise Seventy Nine only

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded

Rupees Three Thousand Six Hundred Thirty

8 05010AA 98.0 stone aggregates 20 mm nominal size) and curing complete excluding cost of 3631.49 Cum

One and Paise Forty Nine only

formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M-250 and curing complete

Rupees Four Thousand Five Hundred Sixty

9 RA 23.0 including the cost of form work but excluding the cost of reinforcement for reinforced 4565.20 Cum

Five and Paise Twenty only

concrete work For footing (Sqare Footing)

Providing & laying controlled cement concrete M-250 with curing etc. complete incl.

Rupees Seven Thousand Nine Hundred

10 RA 18.0 the cost of form work but excluding the cost of rainrorcement for R.C.C. work in (1) 7915.37 Cum

Fifteen and Paise Thirty Seven only

for columns up to plinth etc.

Providing & laying controlled cement concrete M-250 with curing etc. complete incl.

Rupees Six Thousand Six Hundred Two and

11 RA 38.0 the cost of form work but excluding the cost of rainrorcement for R.C.C. work at any 6602.37 Cum

Paise Thirty Seven only

height and level. (1)for Plinth beams

Providing & laying controlled cement concrete M-200 with curing etc. complete incl.

Rupees Five Thousand Four Hundred Thirty

12 RA 101.0 the cost of form work but excluding the cost of rainrorcement for R.C.C. work in 5436.83 Cum

Six and Paise Eighty Three only

Providing & laying controlled cement concrete M-200 with curing etc. complete incl.

Rupees Seven Thousand Eight Hundred Fifty

13 RA 25.0 the cost of form work but excluding the cost of rainrorcement for R.C.C. work in (1) 7857.80 Cum

Seven and Paise Eighty only

Columns For G.F.

NBO NO. QTY Item Description In Figurs Unit Amount

Providing & laying controlled cement concrete M-200 with curing etc. complete incl.

Rupees Six Thousand Five Hundred Forty

14 RA 40.0 the cost of form work but excluding the cost of rainrorcement for R.C.C. work in (1) 6545.81 Cum

Five and Paise Eighty One only

Beams Ground Floor.

Providing & laying controlled cement concrete M-200 with curing etc. complete incl.

Rupees Seven Thousand Three Hundred Ninty

15 RA 134.0 the cost of form work but excluding the cost of rainrorcement for R.C.C. work in (1) 7394.21 Cum

Four and Paise Twenty One only

Slab for any Height

Providing & laying controlled cement concrete M-200 with curing etc. complete incl.

Rupees Seven Thousand Four Hundred

16 RA 10.0 the cost of form work but excluding the cost of rainrorcement for R.C.C. work at any 7424.51 Cum

Twenty Four and Paise Fifty One only

height and level. (1) for Lintel / chhaja

Providing & laying controlled cement concrete M-200 with curing etc. complete incl.

Rupees Six Thousand One Hundred Twenty

17 RA 13.0 the cost of form work but excluding the cost of rainrorcement for R.C.C. work at any 6120.60 Cum

and Paise Sixty only

height and level. (1) R.C.C. Work in Coping

Providing & laying controlled cement concrete M-200 with curing etc. complete incl.

Rupees Seven Thousand Three Hundred

18 RA 15.0 the cost of form work but excluding the cost of rainrorcement for R.C.C. work at any 7334.62 Cum

Thirty Four and Paise Sixty Two only

height and level. (1) R.C.C. Work in Staircase

Providing and laying TMT Bar Fe 500D reinforcement for RCC work including Rupees Seventy Six and Paise Twenty One

19 05014C 30670.0 bending, binding and placing in position complete for all floors. 76.21 Kg

Brick work using common burnt clay building bricks having crushing strength not

06002BA / P - Rupees Four Thousand Twenty One and

20 115.0 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 4021.02 Cum

00. Paise Two only

6 -fine sand)(B) Conventional.

Brick work using common burnt clay conventional building bricks having crushing

strength not less than 35 Kg/sq cm. in Super structure for All floors in cement mortar Rupees Four Thousand Five Hundred Seventy

21 208.0 1:6 ( 1 cement : 6 fine sand ) including curing etc. complete. 4572.76 Cum

x It. 06007A2A Two and Paise Seventy Six only

06008A2A Half brick masonary in common burnt clay conventional building bricks having

+06010B + crushing strength not less than 35 Kg/Sq.cm. in C.M. 1:4 ( 1 cement : 4 coarse sand ) Rupees Six Hundred Ninty Three and Paise

22 7.00 x It. 20.0 including curing etc. complete for all floors. 693.67 Sqm

Sixty Seven only

(17001A) P/ Providing 10 mm thick Mala cement plaster in single coat on brick/concrete

00+ (17006) wall/ceiling for interior plastering finished even and smooth including scaffolding, Rupees Three Hundred Nine and Paise

P/00 + 7.00 x curing and 1 cm x 1 cm grooves at junction of structural members etc. complete. In Forty Five only

(17008) P/00 Cement mortar 1:3(1 cement : 3 fine sand) for all floors.

Providing 15 mm thick cement plaster in single coat Plaster in cement mortar (1:4) (1

Ch 17.60+17.69 cement : 4 sand)on brick/concrete wall, for interiar plastering upto floor two level, Rupees Two Hundred Twelve and Paise Six

Pg.100 finished even and smooth with finishinishing with a floating coat of neat cement only

slurry.for all floors.

20mm thick sand faced cement plaster on walls upto height 10 metres above ground

SOR I. No. Rupees Three Hundred Twenty Six and Paise

25 549.0 level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 326.11 Sqm

17009 / P - 00 Eleven only

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)

to give an required shape even shade after thoroughly brushing the surface to remove Rupees One Hundred Fourteen and Paise

,NBO. No.-0.0 all dirt, and remains of loose powdered materials.etc complete Fifty Three only

NBO NO. QTY Item Description In Figurs Unit Amount

Distempering (two coats) with oil bound washable distemper of approved brand &

manufacture and of required shade on wall surfaces to give an even shade over &

including priming coat with alkali resistance primer of approved brand after

Ch 18.45.Pg thoroughly brushing the surface free from mortar dropping & other foreign matter and Rupees One Hundred Twelve and Paise

27 878.00 also preparing the surface even and smooth.Applying Two Coats of Birla of Asian 112.67 Sqm

No 104+19032 Sixty Seven only

Acrylic Lappy ( Putty ) and two coats of primer of approved brand and manufacture

on New Wall surface to give an even shade including throughly brushing the suface

free from mortar dropping and other foreign matter and sand papered smooth.

Distempering (two coats) with oil bound washable distemper of approved brand &

manufacture and of required shade on wall surfaces to give an even shade over &

including priming coat with alkali resistance primer of approved brand after

Ch 18.45.Pg thoroughly brushing the surface free from mortar dropping & other foreign matter and Rupees One Hundred Twelve and Paise

28 1970.00 also preparing the surface even and smooth.Applying Two Coats of Birla of Asian 112.67 Sqm

No 104+19032 Sixty Seven only

Acrylic Lappy ( Putty ) and two coats of primer of approved brand and manufacture

on New Wall surface to give an even shade including throughly brushing the suface

free from mortar dropping and other foreign matter and sand papered smooth.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 Rupees Two Thousand One Hundred Twenty

29 14012AA, P-00. 43.00 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to 2125.24 Sqm

Five and Paise Twenty Four only

match the shade of slab including rubbing and polishing etc. complete. (A) 25mm

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of

Similar I.No. Rupees One Thousand Ten Hundred Seventy

30 305.00 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse 1073.13 Sqm

14008CA, P.00] Three and Paise Thirteen only

sand ) finishing with flush pointing in white cement.

[Similar item Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of

Rupees One Thousand One Hundred Forty

31 I.No. 14009CA 28.00 steps and dedo on 10mm thick cement plaster 1:3 (1- cement : 3-coarse sand) and 1141.45 Sqm

One and Paise Forty Five only

jointed with white cement slurry

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing Rupees One Thousand Three Hundred Ninty

32 31.00 flooring by adhesive material including dismentaling of existing flooring and jointed 1397.83 Sqm

14021A , P.00] Seven and Paise Eighty Three only

with color cement slurry including finised with flush pointing & cleaning the surface

etc. complete for antiskit

[Similar item Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of steps and

I.No. dedo on 10mm thick cement plaster 1:3 (1-cement : 3- coarse sand) and jointed with Rupees One Thousand Five Hundred Thirty

14009DA , white cement slurry Eight and Paise Eighty Five only

Provdg. & laying matt finished Colour/Printed/Digital glazed tiles of size 300 x

Similar SOR mm or 450 x 450 mm or 600 x 600 mm or any specified size as directed by engineer Rupees Eight Hundred Twenty Seven and

34 I.No. 14.29, P- 9.00 in charge 6 to 8 mm th. as approved by Engineer in Charge In flooring, treads of steps 827.19 Sqm

Paise Ninteen only

& landings laid on a bed of 12 mm th. Cement mortar 1:3 (1cement : 3 coarsesand

finished with flush pointing in white cement.

Similar Item Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm /

Rupees One Thousand Four Hundred

35 [I.No. 14036, 53.00 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick 1417.36 Sqm

Seventeen and Paise Thirty Six only

cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry.

Providing and laying Granite slab 18 mm thick (Average) one side polished flooring

over 20 mm (average) base of cement mortar 1:6 ( 1 cement : 6 coarse sand) or L.M. Rupees Two Thousand Eight Hundred One

36 RA 19.00 1:1.5 laid and jointed with cement slurry including rubbing & polishing etc. complete 2801.74 Sqm

and Paise Seventy Four only

with aproved colour, shade and size by Architect or Engineer in charge for all floors.

NBO NO. QTY Item Description In Figurs Unit Amount

Providing and laying Granite slab 18 mm thick (Average) one side polished in

skirting, risers of steps, dedo and pillars laid on 10mm thick cement mortar 1:3 (1 Rupees Two Thousand Two Hundred Sixteen

37 RA 11.00 cement : 3 coarse sand) and jointed with gray cement slurry including rubbing & 2216.95 Sqm

and Paise Ninty Five only

polishing etc Complete including rubbing & polishing etc. complete with aproved

colour, shade and size by Architect or Engineer in charge for all floors.

Providing moulding / nosing half round to polished granite stone in flooring, risers of

M724 / P - 00 + Rupees Eighty Five and Paise Eighty Five

38 53.00 steps, dedo and pillars etc. complete as per instruction of Engg in Charge. 85.85 Rmt

Providing and laying 18 mm thick polished Black or colour Granite stone slab

machine cut in single piece in sill and jambs laid on 10 mm thick cement mortar 1 : 3 Rupees Three Thousand One Hundred Thirty

39 RA 78.00 ( 1 cement : 3 coarse sand ) laid over and jointed with grey cement slurry including 3131.00 Sqm

rubbing and polishing and half round moulding etc. complete. with aproved colour,

shade and size by Architect or Engineer in charge for all floors.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S.

laths inter-locked together through their entire length and jointed together at the ends

by end locks mounted on specially designed pipe shaft with bracket plates, guide Rupees Three Thousand Five Hundred Three

channels and arragements for inside and outside locking with push-pull operation and Paise Forty One only

including the cost of hood cover and spring etc. complete.(A) Shutters having width

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S.

laths inter-locked together through their entire length and jointed together at the ends

by end locks mounted on specially designed pipe shaft with bracket plates, guide Rupees Four Thousand Four Hundred Ninty

channels and arragements for inside and outside locking with push-pull operation Five and Paise Two only

including the cost of hood cover and spring etc. complete. (B) Shutters having width

3.5 M. and above

Providing and Fixing 35 mm thick openable single shutter both side laminated flush

door with 1.0 mm thick pattern lamination of the standard make on both side, 'I' shape

Pull Handles 150 mm long of 32 mm diameter of S.S. grade 304 as per approved by

Engineer - in - Charge, one number of 10 mm diameter 10" long anticorrosive high

grade AISI 304 stainless steel tower bolt in satin finish as per approved by Engineer in

Charge, four numbers of anticorrosive high grade AISI 304 stainless steel hinges of Rupees Three Thousand Twenty Three and

42 RA 29.00 size 102 mm x 76 mm x 3 mm as per approved by Engineer in Charge and 3023.94 Sqm

Paise Ninty Four only

anticorrosive high grade AISI 316 stainless steel, 10 mm diameter x 200 mm long

aldrap in satin finish including stregthning the granite jambs & soffit by means of

anchor bolts by drilling hole in the granite prior to fixing door as per approved by

Engineer in Charge and one number of cylindrical magnetic door catch as per

approved by Engineer in charge oil painting / polishing to sides of shutters etc.

Providing and fixing Three track Sliding window with with SS ASI grade 304 jali of

IS 85 G with wire of diameter 0.56 mm Mosquito Net shutter having extruded

aluminum Colour anodized section frame Two sliding shutters of Top & bottom

member of Jindal or equivalent Section no:20993 @ wt.of 0.642 Kg/mt, Vertical

Inernal Lock member of Jindal or equivalent Section no:20550 @ Wt.0.693 Kg/mt,

Vertical side (Handle) member of Jindal or equivalent Section no:20549 @ Wt. 0.809 Rupees Three Thousand Six Hundred Seventy

43 RA 26.00 Kg/mt and Outer Bottom members with Gutters of Window frames of Jindal or 3678.42 Sqm

Eight and Paise Forty Two only

equivalent Section no:20928 @ wt.of 1.374 Kg/mt, Outer Top & side members of

Window frames of Jindal or equivalent Section no:20837 @ wt.of 1.066 Kg/mt with

mm thick transparent tinted float glass and one sliding shutter with mosquito net with

standard extruded colour anodized aluminum fittings and fixtures, rubber gasket, air

lock strip and finishing joints with silicon sealant glass fixing to frame as per details

NBO NO. QTY Item Description In Figurs Unit Amount

Providing and Fixing fully adjustable, alluminium colour anodized glazed louvered

ventilator using main frame of section No 2459 size 95 mm x 24 mm x 1.17 mm Rupees Two Thousand Five Hundred Forty

44 RA 2.00 having weight of 0.738 kg/m, using 5 mm thick 100 mm wide transparent glass blade 2548.23 Sqm

Eight and Paise Twenty Three only

louver having dual controls i.e. two right and two left handles including powder

coating to metal work etc. complete.

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc.

10025AA P.No with M.S. flats at required spacings and frame alround, square or round bars with Rupees One Hundred One and Paise

00 round headed bolts and nuts or by Seventeen only

screws (A) Plain Grill.

Painting three coats (one coat of priming coat + two coats of enamel paint) on new

19001+19002, steel and other metal surface with enamel paint including preparing the surface by Rupees One Hundred Twenty Two and Paise

P.No 00 throughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes Eighty One only

fine steel wood, scrapers and sand paper etc. comp.

Providing and fixing wash down water closet Orrisa type pan Hind ware 20004 or

equivalent of size 580mm x 440mm size with 'P' or 'S' trap jointed with C.I. pipes in Rupees Five Thousand Two Hundred One

C.M. 1:1 including fixing 25mm C.P. brass half turn flush cock with C.P. brass wall and Paise Ninty only

flange, Hindware F850016 or equivalent etc. complete.(For all Floor)

Providing and fixing flat back Wash basin Hindware brand 10087 or equivalent, wall

mounted 550 x 400 mm size Mario Starwhite or equivalent with C.I. or M.S. bracket

including cutting holes and making good the same including fixing C.P. brass Rupees Six Thousand Seven Hundred Forty

48 RA 4.00 Hindware Pillar Cock F330002 or equivalent, Hindware Angular stop Cock F 330043 6748.32 No

Eight and Paise Thirty Two only

or equivalent, C.P. brass extension nipple 62 mm long, S.S. flange water super

connection pipe 60cm. long and full thread waste coupling F850001 or equivalent etc.

Providing and fixing 5 mm thick mirror of approved quality and make size 600 x

Rupees One Thousand Ten Hundred Forty

49 RA 1.00 mm with moulding edge by using 4.0 mm thick hard board and fixing on wall with C. 1047.37 No

Seven and Paise Thirty Seven only

P.brass studs etc. complete. For all floor

Providing and fixing 25mm U.P.V.C valve fixing in pipe line complete. Rupees Two Hundred Twenty One and Paise

Providing and fixing 40mm U.P.V.C valve fixing in pipe line complete. Rupees Three Hundred Twenty Five and

Paise Twenty Two only

Providing and fixing 50mm U.P.V.C valve fixing in pipe line complete. Rupees Four Hundred Eighteen and Paise

Providing, Laying and jointing in true line and level U.P.V.C. 75mm pipe (SCH-80)

of following dia. Including fittings as approved by Engineer-in-charge. Pipe shall be

fixed on the wall with the help of Z Patti at every 2000 mm center to center or shall be Rupees Six Hundred Ninty Seven and Paise

concealed as directed including necessary fittings etc. including testing of pipe and Ninty One only

joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concealed Rupees One Hundred Forty Eight and Paise

as directed including necessary fittings etc. including testing of pipe and joints and Twelve only

fixing the same with adhesive solvent, including cost of all materials.

NBO NO. QTY Item Description In Figurs Unit Amount

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concealed Rupees Ninty One and Paise Eighty Four

as directed including necessary fittings etc. including testing of pipe and joints and only

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concealed Rupees Seventy Two and Paise Sixty Five

as directed including necessary fittings etc. including testing of pipe and joints and only

fixing the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be Rupees Eight Hundred Thirty Five and Paise

57 23067 P/00 30.00 fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 835.15 Rmt

145 mm heigh at every 2000 mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of all

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special Rupees Three Hundred Thirty Six and Paise

falnge compression type fittings, wall clipsetc. including making good the wall ceiling Twenty Four only

and floor.(G)110 mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

polythene pipes of the following outside Dia. Low densidy, complete with special Rupees Two Hundred Seventy Seven and

falnge compression type fittings, wall clipsetc. including making good the wall ceiling Paise Forty Three only

and floor.(F) 75mm

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter

with jali of the following nominal diameter of self cleansing design with C.I scread Rupees Five Hundred Fifty Eight and Paise

down or hinged grating including the cost of cutting and making good the walls. Thirty Six only

Providing and fixing S.W. Gully trap with brick masonry chamber & water tight fiber

reinforced cover with frame of 300 mm x 300 mm x 50 mm.size having cover weight Rupees One Thousand One Hundred Seventy

2.50 kg & frame weight 7 kg [I] Square mouth trap (A) 160 mm. x 110 mm. size P- Three and Paise Sixty Two only

type or R type.

Providing and laying in trenches 6 Kgf/sqmt. working pressure I.S.I. mark PVC SWR

Rupees Nine Hundred Fifty Seven and Paise

62 RA 50.00 pipe of 160 mm dia low density pipe including fitting etc complete in ground. 957.48 Rmt

Forty Eight only

Constructing brick masonary chamber of 500 mm x 700 mm inside dimension and

depth upto 0.45 m for under ground CI inspection chamber and bends with bricks

having crushing strength not less than 35 Kg/Sqmt. in CM. 1:5 precast fibre

reinforced concrete frame & cover of square frame of approx 455x610x150mm & Rupees Four Thousand Eight Hundred Thirty

63 RA 2.00 round cover 75mm thick, RCC top slab CC 1:2:4 ( 1 cement : 2 coarse sand : 4 graded 4836.89 No

Six and Paise Eighty Nine only

stone aggregate 20 mm nominal size ) foundation concrete 1:5:10 inside plaster

mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete.

NBO NO. QTY Item Description In Figurs Unit Amount

Providing and fixing P.V.C. water tank of triple layer white colour as approved by

64 RA 1000.00 engineer in charge etc. comp. on terrace. 12.16 Rupees Twelve and Paise Sixteen only Litre

Design, supply & installation of Signages including normal lettering with additional

raised tactile and graphical symbols, height 15 mm to 55 mm Brailleb text and Braille Rupees Five Thousand Eight Hundred Fifty

65 RA 1.00 locator made of zink sulphide based glow in the dark rigid sheet with high luminous 5850.93 Sqm

and Paise Ninty Three only

property enclosed in a transperent weather proof U/V stabilised plastic pasted on

mm thick clear acrylic sheet sheet.

Providing and Fixing 15 mm thick 300 mm x 300 mm Tactile Warning Tiles

(Attention Tiles i.e. Tactile Warning Surface Indicator {TWSI}) of Johnsan Endura

Tac Button Yellow Plus or equvqlent make in flooring laid on 20 mm thick cement

mortar 1:6 (1 cement : 6 coarse sand) on new surface and jointed with cement slurry

including finished with flush pointing & cleaning the surface for all floors as per Rupees One Thousand Three Hundred Sixty

detailed drawing etc. complete as directed by Architect or Engineer in charge. Thse Three and Paise Fifty only

tiles shall be Anti Skid, Chemical Resistant, Fade Proof, Frost - Heat & Weather

Proof, High Flexural Strength, Highly Durable, Stain Resistance . All Tactile Warning

Tiles meet the specific size and dimension standards as required by ISO/FDIS

Providing and fixing in position collapsible steel shutters with vertical channels 20 x

10 x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of Rupees Five Thousand Eight Hundred Twenty

67 11003A P/00 15.00 T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys complete with bolts, nuts, locking 5825.33 Sqm

Five and Paise Thirty Three only

arrangements, stoppers handles including applying a priming coat of red lead paint.

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to

be tempered to bring mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.Providing waterproofing treatment on terrace Rupees One Thousand Ten Hundred Thirty

including cleaning,washing,crack filling and providing and applying two coats of Eight and Paise Twenty Eight only

acrylic based polymer liquid such as UPR of Pidilite,Rainlight of Sikka,Asian dam

proof,zycosil,Dr fixit or equivalent as per guide line of manufacturer complete with

material and labour as per the instruction of Engineer in charge.

Construction Septic Tank as per design 4.46 x 2.22 x 1.50 and drawing with R.C.C.

slab in C.C. 1 : 2 : 4 including excavating , filling bed concrete C.C. 1:4:8 ,0.15 mt. Rupees Forty Four Thousand One Hundred

69 RA 1.00 thick with brick masonary wall 0.23 m thick in C m 1 : 5 Including finishing with 44134.98 Nos

Thirty Four and Paise Ninty Eight only

cement plaster 15 mm thick in C M 1 : 4 inside and 20mm thick double coat plaster at

out side as directed by Engineer-In-Charge.

Constructing underground Water tank of 350 mm thick masonary in C M. 1 : 5 for

outer periphery ,Providing 150 mm thick R.C.C. top and bottom slab with 1:2:4 mix (

1 cement : 2 coarse sand : 4 coarse aggrigate) also providing 40 mm thick IPS in bed

70 RA 10000.00 over 300 mm thick BBCC (1:3:6) with inside plaster of 15 mm thick in cm 1:3 finish 9.67 Rupees Nine and Paise Sixty Seven only liter

smooth with floating coat neat cement slurry on wall with precast cement conceret

cover with frame (heavy duty) 610mm x 610mm internal dimention as aprroved by

engineer incharge etc.

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand

Rupees Two Thousand Six Hundred Thirty

71 5.3.3 24.00 broken stone aggregates 40 mm nominal size) and curing complete excluding cost of 2630.68 cum

and Paise Sixty Eight only

formwork in (A) Foundation and Plinth

Suppliying of graded stone aggregate of following sizes (for W.B.M. Road)(2) Hand Rupees Two Hundred Sixty Two and Paise

72 26011B 36.00 broken stone aggregate 40 mm to 63 mm size. 262.60 cum

NBO NO. QTY Item Description In Figurs Unit Amount

Providing and laying Tremix Concrete Road of Controlled cement concrete M-200 in

Two layer each layer consisting depth of 125mm and curing complete including the

cost of form work and including provision of contraction, expension, construction and Rupees Four Thousand Four Hundred Thirty

longitudinal joints at 5.00 Mt. C./C., joints filled with bitumen joint filler for road Three and Paise Ninty only

surface, including channels for side form work, surface vibrator & floater as directed

by Engineer-In-Charge. 150mm thick

Annexure-(A1) Drilling of 200 mm dia pilot bore hole in all strata by using mud_flush direct rotary

SORMECH ring by using Bentotite powder. Rupees One Thousand Three Hundred

202-23 page Seventy Eight and Paise Sixty Five only

GWSSB MANUFACTURE ,SUPPLY AND DELIEVER of isi marked UPVC casing pipe with

SOR(mec) latest amendment (B) 200mm nominal dia Rupees One Thousand Four Hundred Fifty

2022-23 p-21 it Eight and Paise Forty Four only

Providing and fixing Pre-Cast Rubber Dye Inter locking concrete Block 60mm thick

Ch-14, it code- with grade of concrete M-200 pnumatic compressed by mechanically pressed and as Rupees Seven Hundred Forty and Paise

14033 per approved design including 75mm sand layer for levelling and filling the joint with Fifty One only

sand in proper line and level.

Providing, fixing, testing and commissioning of ABC type 6kg capacity fire

extinguser monic phosphate powder 50,stored pressure guage. Controllable discharge Rupees Two Thousand Four Hundred Thirty

mechanism class A rating 3A & Class B rating as per IS 15683 ISI mark(ABC Dry Four and Paise Ten only

chemical powder-MAP 50%)

Providing, fixing, testing and commissioning of CO2 type fire extinguser of capacity

4.5 kg filled with CO2 Gas as per IS 15222 with controll discharge mechanism fitted

with Hose and Horn applicable on Class B Fire rating 21B confirm to IS 15683 Rupees Six Thousand Nine and Paise Fifty

78 MR 3 bearing ISI mark CO2 cylinder as per IS 7285monic phosphate powder 50,stored 6009.50 nos

pressure guage. Controllable discharge mechanism class A rating 3A & Class B rating

as per IS 15683 ISI mark(ABC Dry chemical powder-MAP

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires,

in following type of pipe to be erected concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch / bell push & accessories and earth continuity Rupees Four Hundred Ninteen and Paise

79 1-2-1. 110.00 of following type, erected on PVC / Metallic box, single mounting base frame 419.15 Pt

covered with textured/metallic front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder / ceiling rose / H.D.Connector as

directed.(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in / flushed on wall/ceiling complete

with 6A Modular type switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth continuity of following Rupees Five Hundred Ninty Eight and Paise

type erected on PVC / Metallic box, single mounting base frame covered with Ninty Three only

textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.(a) with medium class Rigid

PVC pipe and accessories erected flushed on wall/ceiling complete

NBO NO. QTY Item Description In Figurs Unit Amount

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following

type of to be erected concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate Rupees Six Hundred Sixty Nine and Paise

81 1-2-3. 35.00 front plate modules erected on / in wall / ceiling as per pipe erected with following 669.63 Pt

Sixty Three only

type of accessories. [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board.(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete CAT-III

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

Rupees Four Hundred Forty Five and Paise

82 1-2-3. 25.00 switchboard/mcb db board(a) with medium class Rigid PVC pipe and accessories 445.41 PT

erected flushed on wall/ceiling complete CAT-III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following

type of to be erected concealed in / on surface of wall / ceiling complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate Rupees Seven Hundred Eighty Nine and

83 1-2-3. 12.00 front plate modules erected on / in wall / ceiling as per pipe erected with following 789.82 Pt

Paise Eighty Two only

type of accessories.[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire

with 2.5 sq.mm ( green) earthing wire from mcb d b board. (a) with medium class

Rigid PVC pipe and accessories erected flushed on wall/ceiling complete CAT-III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic / Wooden box, single mounting base frame covered with Rupees Two Hundred Forty One and Paise

textured / metallic /white front plate modules erected on / in wall / ceiling with Thirty Nine only

following type accessories cat III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires erected in below type of pipe with 6A Modular type switches and

following type of accessories erected on PVC / Metallic/Wooden box, single mounting Rupees Five Hundred Thirty and Paise

85 1-2-5. 2.00 base frame covered with textured / metallic/white front plate modules erected on / in 530.25 Pt

Twenty Five only

wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or

H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete CAT-III

Providing following type of Modular Type Accessories mounted with pvc / metallic

box, single mounting base frame covered with textured / metallic front plate , modules Rupees One Hundred Fifty Three and Paise

erected with necessary connection. As desired by Engineer In charge. (3) Two Pin/RJ- Fifty Two only

11 Telephone Socket (A] For One GangCat.III

. (4) TV Co-axial Socket outlet Cat.III Rupees One Hundred Fifty Three and Paise

(7) Blank Plate Single Rupees Twenty Four and Paise Twenty

(8) Computer RJ-45 socket Rupees One Hundred Fifty Three and Paise

Supplying & erecting Delton or approved make Telephone Cable electrolytic copper

conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape &

90 1-4-7. 50.00 sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & 19.19 Rupees Ninteen and Paise Ninteen only Mtr

confirming to C-DOT erected in existing pipe. of following size of conductors &

nos.of pairs. With necessary connections. [A] Conductor Size 0.5 mm (b) Armoured

[Jelly Filled] (2) 2 PAIR

NBO NO. QTY Item Description In Figurs Unit Amount

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Rupees Twenty Three and Paise Twenty

Junction boxes fixed with adhesive solution & Clamps with following diameter of Three only

pipes, in approved manner as directed (a) 20 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

92 1-3-4. 40.00 coupling, PVC bushes, Check-nuts etc. complete of following sizes.(2) 25 mm 20.20 Rupees Twenty and Paise Twenty only Mtr

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in Rupees Fifty Nine and Paise Fifty Nine

93 1-4-1. 120.00 /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated 59.59 Mtr

stranded wire of green colour for earth continuity of following size (a) with medium

class Rigid PVC pipe and accessories(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in Rupees Seventy Eight and Paise Seventy

94 1-4-1. 450.00 /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated 78.78 Mtr

stranded wire of green colour for earth continuity of following size (a) with medium

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall / Rupees One Hundred Seven and Paise Six

95 1-4-2. 70.00 ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 107.06 Mtr

colour for earth continuity of following size (a) with medium class Rigid PVC pipe

and accessories.(a) 2 wire 4 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall / Rupees One Hundred Seventy Two and Paise

96 1-4-2. 50.00 ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 172.71 Mtr

Seventy One only

colour for earth continuity of following size (a) with medium class Rigid PVC pipe

and accessories g) 4 wire 4 sq. mm.

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall / Rupees Four Hundred Five and Paise One

97 1-4-2. 25.00 ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 405.01 Mtr

colour for earth continuity of following size (a) with medium class Rigid PVC pipe

and accessories(i) 4 wire 10 sq. mm (use earth wire of 4 sq.mm )

Providing & Erecting approved make following size of TV Co-axial flexible cable

comprising inner conductor of solid bare copper insulated with Foam PE & Secondary Rupees Thirty Seven and Paise Thirty

conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage Seven only

overall sheathed with black PVC insulation. b).RG-6

Supplying & erecting approved make LAN cable of following size in existing pipe as Rupees Forty Five and Paise Forty Five

99 1-4-8. 70.00 per direction[C] CAT - 6 45.45 Mtr

Providing & erecting Switch board for Computer or electric apparatus consisting of

following modular type accessories mounted with PVC / Metallic concealed /open

box with single mounting base frame covered with textured/metallic /white front late, Rupees One Thousand Ten Hundred Eighty

modules erected with necessary connections as directed 1 no. 6A /16A universal plug- One and Paise Seventy One only

switch combined.3 nos. 6A Switch 3 nos. 6A 5 pin Plug For Modular Type

Accessories CAT III

Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board

Rupees Two Hundred Thirty Eight and Paise

101 1-6-13. 2.00 having portable bell push working on D.C. & bell on 230V A.C. supply with cells / 238.36 Ea.

Thirty Six only

NBO NO. QTY Item Description In Figurs Unit Amount

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company mark/name 120 to

300 V,Power Factor more than 0.9, THD < 10 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt LED driver efficiency > Rupees Five Hundred Thirty Five and Paise

85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make Thirty only

LED used for luminaire. ( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.) (A)

Tube Light with integral driver ((v) 36-40 Watts, Surge-2 KV, IP-20, conventional

Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge Rupees One Hundred Twelve and Paise

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp Eleven only

holders, pf >= 0.5(ii) 5 to 8 watts

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to

300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver Rupees Six Thousand Five Hundred Sixty Six

104 2-16-2. 8.00 efficiency > 85 %.CREE /RAM / PHILIPS Lumileds / NICHIA / SEOUL/ dgeLux 6566.01 Ea.

and Paise One only

(U.S.A.) make LED used for luminaire. ( fittings required LM-79 & LM-80

certificates) (NOTE: Below escription have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.) (A) Street Light (IP-65), Surge protection -4KV integral and 10 kv non

integral ,Light must have 440VAC line supply protection. It should withstand

hours for 440VAC line supply. ((iv) above 90 to 120 wattsCAT III

Supplying & erecting approved make SMC press moulded composite FRP. loop-in,

loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement Rupees Four Hundred Seventy Six and Paise

having locking arrangements with mounting clamp with nuts, bolts & washers Seventy Two only

suitable for erection on pole with cable clamps& earth bolt of following size of box.. (

c)150mm x 125mm x 100mm [deep]

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of Rupees Sixty Two and Paise Sixty Two

same material at required depth in existing trench for laying of cable. below ground only

/ road surface for enclosing cable (A)50 mm outer dia

Providing and fixing approved make Perforated C type cable tray. Made from sheet

steel. The cable tray should be single or double bended as per required and as per IS

2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with Rupees Sixty Three and Paise Sixty Three

107 4-11-1. 120.00 max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt 63.63 420

and washers etc. erection with necessary support( included) as per Specification and

as per instruction of engineer in charge..(3) 150 X 50 X 1.6 mm Thick

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Rupees Seven Hundred Ninty Four and Paise

108 3.14.3 10.00 Transformer, LT panel board, Motors etc. using copper clamp. 794.87 Kg.

Eighty Seven only

NBO NO. QTY Item Description In Figurs Unit Amount

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved make OEM has to submit Rupees Five Thousand Seven Hundred Sixty

test certificate) & having back filling compound of (B) Inner chemical (CCM and Paise Three only

Compound)- Resistivity:- 0.2 ?/ meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time Necessary test

report must be submitted. (b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Rupees One Hundred Fifty One and Paise

110 4-3-5. 140.00 Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in 151.50 Mtr

existing trench / pipe of following size of cables(A) 4 core 16 Sq. mm

(B) 4 core 25 Sq. mm Rupees One Hundred Eighty Eight and Paise

Eighty Seven only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Rupees Three Hundred Seventy Two and

existing trench / pipe of following size of cables (D) 3 1/2 core 70 Sq. mm ( 35 Sq. Paise Sixty Nine only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Rupees Five Hundred Thirty Four and Paise

existing trench / pipe of following size of cables (E) 3 1/2 core 120 Sq. mm ( 70 Sq. Twenty Nine only

Making trench in soft soil of suitable width of 90 cms deep for laying cable or

114 4-5-1. 70.00 locating the fault all over the run and back filling the same and making the surface as 46.46 Rupees Forty Six and Paise Forty Six only Mtr.

a normal ground.

Covering of cable with second class bricks or cement tiles laid cover the cable

Rupees One Hundred Thirty Four and Paise

115 4-5-3. 70.00 crosswise & also on both sides with covering of 7. 5 Cms. layer of sand above & 134.33 Mtr.

Thirty Three only

below cable (16 bricks per meter)

Providing and fixing heavy duty flange type brass cable gland with rubber ring for

Rupees Thirty Eight and Paise Thirty Eight

116 4-6-1. 2.00 PVC insulated armourd cable complete with out going tails, insulating tape etc. for 38.38 Ea.

following size of cables. d) 2 to 4 Core 10 Sq.mm

(D) 2 to 4 core 16 Sq. mm Rupees Forty Seven and Paise Forty Seven

(E) 2 to 4 core 25 Sq. mm

118 4-6-1. 4.00 51.51 Rupees Fifty One and Paise Fifty One only EA

Providing and fixing heavy duty flange type brass cable gland with rubber ring for

Rupees One Hundred Forty and Paise

119 4-6-3. 4.00 PVC insulated armourd cable complete with out going tails, insulating tape etc. for 140.39 Ea.

Thirty Nine only

following size of cables. (E) 3 & 1/2 core 120 Sq. mm

(C) 3 & 1/2 core 70 Sq. mm Rupees One Hundred Three and Paise Two

Solderiess crimping type Aluminum lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

121 4-7-1. 20.00 13.13 Rupees Thirteen and Paise Thirteen only Ea.

terminals with brass / cadmium plated nut bolts in as approved manner A)B)

NBO NO. QTY Item Description In Figurs Unit Amount

122 15.00 15.15 Rupees Fifteen and Paise Fifteen only EA

(E) 70 Sq.mm. Rupees Twenty Five and Paise Twenty

(G) 120 Sq.mm. Rupees Forty Five and Paise Forty Five

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS

694, IEC - 227 erected in existing pipe of following size (Specifically for control Rupees Fifty Three and Paise Fifty Three

panel, relays, power switchgears, motor starters & control wiring) with required size only

of copper lugs, nuts and bolts if required. .(e) One wire 6.00 sq. mm

NBO NO. QTY Item Description In Figurs Unit Amount

f) One wire 10.00 sq. mm Rupees Eighty Seven and Paise Eighty

g) One wire 16.00 sq. mm Rupees One Hundred Thirty Five and Paise

Thirty Four only

h) One wire 25.00 sq. mm Rupees Two Hundred Thirty Seven and Paise

Thirty Five only

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of Rupees Three Thousand Four Hundred

MCBs.(The DBs should be used of same company of MCB to be used) suitable for(B) Twelve and Paise Seventy Nine only

three phase incoming and single phase horizontal type outgoing Per phase isolation

type (PPI) (b) sheet steel double door (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of Rupees One Thousand Four Hundred Ninty

MCBs.(The DBs should be used of same company of MCB to be used) suitable for(A) Two and Paise Seventy Eight only

single phase incoming and horizontal single phase outgoing(b) sheet steel double door

(IP-43)(iv)12 way

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve)

Rupees Two Hundred Ninty Five and Paise

131 3-10-3. 16.00 having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 295.93 EA

Ninty Three only

following capacity (B) 40 Amp.

Approved make ELCBs / RCCBs conforming to IS:12640 and having sensitivity of

30 m A and Short Circuit with stand capacity of 6KA and suitable for operation on Rupees Two Thousand Two Hundred Thirty

132 3-12-1. 16.00 single phase 240 V having characteristic of quick action & tripping with all advance 2235.13 Ea.

Five and Paise Thirteen only

feature & do not incorporate any electronic component for following Max. rating. (ii)

40Amps. DP Cat III

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

Rupees One Hundred Twelve and Paise

133 3-10-1.(B) 104.00 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 112.11 Ea.

existing box. confirming to IS 8828/1996 with ISI Mark Cat-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)

Rupees Seven Hundred Thirty Seven and

134 3-10-5. 6.00 having 10KA breaking capacity & confirms to IS :8828 in existing box having 737.30 Ea.

Paise Thirty only

following capacity (B) 63 Amp. Cat-III

NBO NO. QTY Item Description In Figurs Unit Amount

Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above protection as

per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & Rupees Fourteen Thousand Nine Hundred

135 3-16-1. 2.50 earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, 14902.55 Sqmt

Two and Paise Fifty Five only

handles with locking arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains, meters Fuses etc. The dimension shall

be measured excluding base beams). The panel shall be supplied with following

approved manufacturers with following size.(B) The standard companies switch gear

shall be used and only manufacturers at CPRI approved factory (I) with 350mm depth

Operational Handle Assembly Complete for up to 800A.(Rotry Handal) Rupees Seven Hundred Fifty Four and Paise

Forty Seven only

Providing and erecting busbar chamber confirming to IS-375 fabricated from

G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and

necessary busbar supports with COPPER busbar having current density not more than

1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour Rupees Eight Thousand Five Hundred Thirty

insulation tape for phase sequence, three phase & neutral each suitable for following Nine and Paise Fifty Five only

current capacity with necessary painting mounted on wall or pedestal frame of

required size with necessary connections.(C) Suitable for 300 Amp. capacity

NBO NO. QTY Item Description In Figurs Unit Amount

Approved make Four pole moulded case circuit breaker having breaking capacity ICU

of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed Rupees Six Thousand One Hundred Seventy

138 3-4-1. 3.00 thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal 6173.12 Ea.

Three and Paise Twelve only

connections & complete erected in existing 16 G.M.S. housing. ICS=100% ICU

Providing and erecting Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Rupees Eight Thousand Fifty Five and Paise

139 3-4-2. 4.00 Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all 8055.76 EA

Seventy Six only

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% ICU only CAT III

Approved make Four pole moulded case circuit breaker having breaking capacity ICU

of 35 KA. at 415 V . having normal current rating up to 250A. with variable thermal Rupees Twenty Thousand Nine Hundred

140 3-4-4. 2.00 & magnetic release suitable to work on A.C.supply 50 c/s. with all internal 20946.39 Ea.

Forty Six and Paise Thirty Nine only

connections & complete erected in existing 16 G.M.S. housing. ICS=100%

ICU only CAT III

providing and erecting Approved make Three Phase & Neutral LT Heavy Duty Switch

Disconnector Fuse Unit Cubical type for panel mounting complete with operating Rupees Eight Thousand One Hundred Forty

141 3-3-2. 1.00 mechanism suitable to operate on 415V A.C. , 23A duty With HRC fuses of suitable 8141.61 EA

One and Paise Sixty One only

load confirming to IS. 13947 (Part I & III). of following capacities.(e) 250 Amp

Supplying & erecting approved make Four Pole 415V change over switch interior for

Rupees Twelve Thousand Two Hundred Forty

142 3-6-8. 1.00 panel mounting with operating mechanism A.C.23 duty confirming to IS for (D)200A 12241.20 EA

One and Paise Twenty only

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double

ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete Rupees One Thousand Nine Hundred Forty

having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with Eight and Paise Twenty Nine only

earthing.(Make shall be approved by Engineer in charge)

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod

Rupees One Hundred Eight and Paise Seven

144 5-2-1. 25.00 erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible wire 108.07 Mtr

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Rupees One Hundred Eight and Paise Seven

Duty PVC box complete erected concealed in Ceiling with necessary finishing. only

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

146 5-2-5. 40.00 18.18 Rupees Eighteen and Paise Eighteen only Ea.

Supplying & erecting single phase approved make industrial exhaust fan suitable for

medium duty ring mounted low noise operation suitable for medium duty having Rupees Three Thousand Eighty Two and

following dia size and maximum speed in RPM[B] 380 mm dia 900 RPM Paise Fifty Two only

Providing suitable M.S. louver shutter of the Exhaust fan. Rupees Three Hundred Sixty Eight and Paise

Sixty Five only

Providing recess in wall or window frame suitable for erection of Exhaust fan

complete with plastering and colour washing to match the colour of the wall or Rupees One Hundred Eighty Nine and Paise

window complete with expanded metal in order to render the fitting in accessible and Eighty Eight only

the room water-proof.

Supplying and erecting approved make panel mounting type Digital Voltmeter

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel Rupees One Thousand Two Hundred Seventy

board with all connection, wiring etc .with manufacturers calibration Five and Paise Sixty Three only

NBO NO. QTY Item Description In Figurs Unit Amount

Supplying and erecting approved make panel mounting type Digital Ammeter having

3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable Rupees One Thousand Five Hundred Fifty

151 9-2-4. 1.00 to operate on 500 Volt AC , erected on existing panel board with all connection, 1558.43 Ea.

Eight and Paise Forty Three only

wiring etc .with

manufacturers calibration certificate.

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply

Rupees Three Hundred Seventeen and Paise

152 9-2-6. 1.00 500 V on existing panel board 317.14 Ea.

with necessary connections.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio

15 VA burden erected in existing CRCA box duly secured with insulating materials Rupees Two Hundred Seventy Four and

connected to the meter Paise Seventy Two only

Supplying and erecting approved make suitable panel indicator LED type lamp, lens

Rupees Forty Three and Paise Forty Three

154 9-2-9. 3.00 cover, complete erected with 43.43 Ea.

necessary connections.

Providing printed instruction chart both in English and Gujarati and duly framed with Rupees One Hundred Thirty and Paise

155 10-2-1. 2.00 front glasses, for treatment of person suffering from Electric shock 130.29 Ea.

Twenty Nine only

Providing and erecting approved make split air-conditioning unit consisting of copper

condensing unit with fan motor, hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and blower motor Rupees Thirty Thousand Nine Hundred Thirty

156 8-3-1. 9.00 with its accessories by means of extra supplied proper insulated copper tubing,drain 30930.24 EA

and Paise Twenty Four only

PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly green gas

charging, 15A plug top & Remote Control) with necessary core cutting. For 3 Star

Rating of current year (b) for 1.5 ton capacity

Supplying and erecting insulated pair of soft copper tubing including power and

Rupees Six Hundred Forty Three and Paise

157 8-3-5. 20.00 control cable,necessary PVC drain pipes for Split AC machine up to 4 TR capacity 643.37 Rmt.

Thirty Seven only

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity

150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should

drop by 15˚C within a hour, The water cooler should be comprising of hermetically Rupees Forty Six Thousand Six Hundred Forty

158 8-13-2. 1.00 sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, 46648.87 Ea.

Eight and Paise Eighty Seven only

coil, thermostats, relay etc.complete with necessary inlet & outlet connection. The

body of water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification system with

M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC

filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi Rupees Twenty Four Thousand Three Hundred

159 8-13-6. 1.00 inline type post carbon filter auto low & high pressure switches with following size of 24394.53 Ea.

Ninty Four and Paise Fifty Three only

storage tank & LPH capacity & erected as directed with one year comprehensive

maintenance guarantee. [C] 50 Ltr / Hr with 150 psi 2 nos booster pump

Supplying and erecting Direct - On - Line Starter with 18 A. rating contactor and with

3.5 Amp. 18A range directly operated in totally insulated elegant enclosure for single Rupees Two Thousand One Hundred and

phase operation up to 3 HP as per IS 13947 complete erected on P.W. Block with Paise Eighty only

necessary connection.

Providing and erecting open well horizontal mono block pump set with cast iron body,

complete with Three Phase submersible motor having[C] For 3 HP 3 phase open well Rupees Fifteen Thousand Seven Hundred

horizontal mono block pump set suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr Seven and Paise Fifty Two only

head suitable for 50/65 mm dia delivery pipe

NBO NO. QTY Item Description In Figurs Unit Amount

S.I.T.C. submersible pump set suitable for bore of 100 mm. dia. or more having three

phase motor capacity not more than 3 H.P. of different range with following capacity Rupees Twenty Thousand Nine Hundred One

162 9-6-2. 1.00 . Lifting and Lowering taken extra.(A) (20 stage) 170 to 185 LPM discharge at 57 to 20901.95 EA

and Paise Ninty Five only

48 mtrs. Respectively head suitable for 50 mm dia. delivery pipe

Supplying & erecting approved make motor control cubical panel (Direct - on - line)

made from 16 G. CRCA sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of suitable size of ON- OFF isolator

(AC - 3/23duty) main fuses, single phasing preventer, indicating lamps for R- Y - B

phases, overload relay, Automatic water level controller, Ammeter, Voltmeter each Rupees Seven Thousand Seven Hundred

with two way selector switch incoming, wires duly socket crimped, main contactor & Twenty Two and Paise Forty Six only

overload relay, start - stop push buttons, to be erected on angle iron frame grouted on

wall as directed. The isolator, overload relay & contactors will be of L & T, Siemens

or BCH make only. (A) DOL up to 5.0 H.P.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Rupees One Hundred Four and Paise Three

164 9-7-1. 50.00 Submersible copper cable approved make of following Size. B) 3 Core x 2.5 Sq. mm. 104.03 MTR

(C) 3 Core x 4 Sq. mm Rupees One Hundred Forty Six and Paise

Forty Five only

Supplying & erecting ISI Marked (Embossed) following size of “B” Class G.I . Pipe

Rupees Two Hundred Twelve and Paise

166 9-7-3. 20.00 & erecting as directed by Engineer-in-charge with necessary plumbing as desired. (C) 212.10 MTR

Supplying of following size of HEAVY UPVC column pipe with coupler and wire Rupees Two Hundred Fifty Seven and Paise

Fifty Five only

Supplying and erecting, commissioning and testing of Diesel Generating set

confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase,

volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel

engine with multi-cylinders developing suitable BHP not less than following capacity

at 1500 RPM with 10% overload for one hour in 24 hours with standard accessories

like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and

manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head

to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric

starting equipment complete with standard heavy duty battery, dynamo, cut-outs,

ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type

exhaust silencer and vertical hot air duct both

logged with asbestos rope, save oil trays, exhaust piping of required length, standard

wall/floor mounted fuel with level indicator and piping and drip proof alternator, self

excited, self regulated, screen protected, with excitation system, capable of delivering

the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at

RPM, conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated voltage

fabricated steel base plate with antivibration mounting engine and alternator both

connected to each other by flexible flange coupling and with floor/wall mounted

control panel box comprising of voltmeter ammeter, selector switches, ACB /

MCCB / MCB of adequate capacity,

NBO NO. QTY Item Description In Figurs Unit Amount

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be

connected with provided suitable capacity armoured cable and complete with

Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing

material Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam

of 40 Density - at least 40 mm. The resin bonded rockwool covered from inside the

canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a Rupees Five lac Forty One Thousand Two

distance of 1 mtr, as per PVCT norms. Erection, commissioning and satisfactory Hundred Ninty Three and Paise Thirty Four only

testing as per requirement with first filling of fuel, oil, etc. with guarantee / Warrantee

of complete system for Two years. & with obtaining all necessary certificate from

Electrical Inspector. The Capacity and Ratings of DG sets are as below.(I) Continuous

Rating of 62.5 KVA ,BHP not less than 76 BHP

Providing & erecting approved make AMF control panel suitable for following size of

3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed

below: 1) Power module: A pair of electromechanically interlocked contactors

(formains&generator)Overload relay for generator contactor Neutral contactor for

mains and generator Power socket for connections. 2) Control and metering module:

Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start

facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual Rupees Ninty Seven Thousand Three Hundred

operation. Auto/manual switch. Emergency stop pushbuttons.Manual start push Twenty and Paise Fifty Seven only

button.frequency meter. Engine hour meter. Two earthing studs.3) Protection module:

The engine shutdown in the unlikely event of Low lube oil pressure High cylinder

head temperature. V belt failure.4) Indicators with alarm Load on generator.5)

Indicators Load on mains Engine fails to start.Emergency stopbattery charger.The

AMF Panel of following capacity ((A) AMF Control Panel for 50/62.5 KVA 3 phase

In words Rupees:- Rupees One carore Fourty Lacs Thirty Seven Thousand Five Hundred Ninty And Paisa Seventy six Only

(A) Total Tended amount. Rs.______________

(B) Rebate on above tendered amount (if any_____________%(in figure) Rs.______________

(C) Net tendered amount (A-B) Rs.______________

Note 1.:- All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

Note 2.:- All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his signature.

Note 3.:- Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions, site, moisture, weather etc.

Note 4.:- To be continued on additional sheets, if found necessary.

Executive Engineer PIU -Surendranagar

Signature of the contractor.