WBMAD/ULB/HM/APAS- 10(2025-26)

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. (P.No.1, T/2(a)

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (P.No.1, T/3(a)

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. (P.14, T/1)

(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor P.no. 34, T/22(a)), 3rd corrigenda, (A) [Pakur Variety] (a) 1:3:6 proportion

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (a) Pakur/Chandil variety. (P.No.26 T/10(i)), Annalisys rate

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 m (P-43, T/40) 8 mm dia

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (P.No.43, T/36 (f)) (f) 25 mm to 30 mm shuttering without staging

Supply of 9MTR GI Octogonal pole Fabricated part as per dimension:TOP DIA-70 mm, Bottom Dia 155mm (Section Length-900033) Thickness-3 mm, Base Plate-260 x 260 x 16 mm. Foundation bolts M24 x 750mm x 4 Nos."J" Type Bolt. Make-UTKARSH. Rate Analysis

Supplying and delevery of 200 watt LED street light with Pressure dia cast aluminum housing, IP66 protection,road way luminarie with high power LED. (REF:GREEN CITY MISSION DATED:17/12/2020.No.1528(3)-UDMA-13013(99)/3/2020-ESTT-TCP-Dept. of UDMADated,Kolkatta, the 8th Dec,2020).Make: Philips.

Supplying and Drawing 1.1KV single core stranded 'FR'PVC insulated & unsheathed single core stranded coppe rwire (Brand approved by EIC)of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required(a) 2 x 22/.3(1.5 sqmm) PWD Sch. Page-E-9;1a For internal connectio

Supply, delivery 1.1 KV grade XLPE insulated 2 core 10 sqmm AL armoured cable (KEI. Havells, Polycab) I & WD P-101

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed (PWD SOR 2017 page No-F-2, Item No-1a)

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 40 mm Dia (PWD SCH Page-F1;3(A)

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 cor PWD Sch Page-F1;3(a)

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. PWD Sch Page-C-3;Item-20

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials: 2 Core 10sqmm cable. PWD SOR 2017 Page No-F-5, Item No-8b)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : For 2 Core10sqmm . PWD SOR 2017 Page No-F-4, Item No-7a)

Supplying & Erection of mini size feeder pillar box of Size(918 x 561 x 382 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing ofTimer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C (UDMA/P-7/38)

32A DP MCB Isolator (Incomer) PWD Sch 2017.Page No.D-5, Sl No-6. Legrand

32 A DP C-Type MCB. PWD Sch 2017.Page No.D-6, Sl No-7.(L & T)

Inter connection wiring with 2 x 4sqmm copper wire. PWD Sch 2017.Page No.E-9/I-G.,

Earthing with 50mm dia GI pipe3.64mm thick x 3.04Mts. long and 1x4SWG GI (HotDip)wire(4Mts. long),13mm dia x 80mm long GI bolts,double nuts,double washersi ncl.S& F15mm dia GI pipe protection(1Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65Mts.below the ground level as below: (PWD SOR 2017 Page No-G1. Item No-2a)

Add GST @ 18%

Add Cess 1%