REPAIR REPLACEMENT OF FLOORING JOINERY PLUMBING AND CERTAIN OTHER WORK IN JCOS ORS ACCN IN POCKET 7 AND 8 IN AGE B R III UNDER GE ROORKEE

Amount

Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter not exc 1.5 Sqm each complete all as specified and directed.

S&F IInd class hard wood (sal) plain. Solid straight chowkhat and frames, wrought, framed, rebated on the solid, rounded or chamfered but together with glue, pinned at joints complete all as specified and directed.

S&F M.S work as in holdfasts, wind ties , plane angle cleats for securing purlins to wooden trusses or rafters etc. complete all as specified and directed.

Cutting holes in brick walls exc half brick wall but n exc one brick wall built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

Taking down shutters of any description exc 1sqm but n exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1sqm each complete all as specified and directed.

M & L cement concrete type BO 1:2:4 (12.5 mm graded agg ) as in bed block , coping & filling to PS Frame etc complete all as specified and directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated with second class HW complete all as specified and directed.

S&F 35mm thick IInd class hard wood glazed skelton shutters open rebated and prepared to receive glass,guage etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat v

S&F solid PVC door frame of the size 50mm width , 47 mm height with a wall thickness of 5mm(+0.25) made out of extruded 5mmmade out of 5mm PVC sheet reinforced with MS square tube as per specification drying as per manufacture instructions including all necessary fitting complete complete all as specified and directed.

S&F 30mm thick factory made solid panel PVC door shutters made out of MS tubes of top and bottom rail MS frame shall be covered with heat moulded PVC "C" channel 5mm thick and having width of 50mm for from stiles and H section of 100mm wide for the rails, the inner panel 6mm thick PVC sheet insulated between frame and panel should be struck to the stiles and rails 50x30x5 mm, channel rails 100x30x5 mm H junction. The size, design and pattern of the paneled shutter shall be proceed by GE / Eng-in-Charge and all as per drawing / manufacture instructions complete all as specified including locking device and all necessary fitting etc here and after complete

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.

S & F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.

S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed.

S&F 150mm ordinary helical door spring incl. roller and roller plate complete all as specified and directed. "make : Ritz."

S&F in repair 150mm ordinary helical door spring incl. roller and roller plate complete all as specified and directed. "make : Ritz."

S&F butt hinges 125mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed.

S&F 250mm long alumn. alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section all as specified

S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes , framed guard bars, barred iron doors , ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

S&F granite( of any type) stone slab of 20mm thick laid over 15mm thick cement screed bed in CM1:6 machine cut, size and jointed over grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing incl dismantling of old marble stone complete.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.

Taking down cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks , straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed

M&L for brick work with old size sub class 'B' bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

M&L for rendering 15mm thick in CM 1:6 on brick walls finished over and fair without using extra cement complete all as specified and directed

Demolition of concrete/tiles/kota etc in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed

M&L75 mm thick cement concrete 1:3:6 type C-2 (40mm graded aggregate) as in plinth protection/path finish even and smooth without using extra cement complete all as specified and directed.

Supply and laying sand (25 mm thickness ) for cushioning to interlocking paver block complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment complete all as specified and directed (Make:-ECO/KRISHNA) .

M&L cement concrete TypeB0 1:2:4 (12.5mm graded) in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Dismantling of water tanks 500 ltrs of capacity and removing to store complete all as specified and directed.

M&L 500 ltrs Rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) incl 20mm PTMT ball valve (Ball valve make:- prayag) hoisted and fixed in position all as specified in SSR Part I.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 mm - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)

S & F in repairs of 15 mm bore size CP bib tap complete all as specified and directed. (Make : Prayag/ Polytuf/Symat).

S&F In repair 15mm bore bib tap, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed.

S&F in repair 15mm dia Pillar taps of CP any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms)

S & F in repairs stop/ Angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed. (MODEL : 88910 Make : Prayag, Jaguar Group OR EQUIVALENT RANGE OF MARC, JAGUAR, JOHNSON).

S & F in repairs 15mm Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly or push button type handle as required, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs PVC connection 450 mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed. Make : Prayag / Symet / Polytuf.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440mm with integral foot rest including 'P' or 'S' complete and all as specified and directed.

S & F in repairs 10 ltrs PVC (White) valve less symphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed (Make : Hind ware/ Cera / Parryware/Commander).

S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap (Make : Parryware/Hindware) and making good the disturbed surface to match with the existing complete all as specified and as directed.

S & F in repairs vitreous china wash hand basin, white flat back size 550 x 400 mm (excluding tap) but including Waste coupling, waste pipe, porcelain stopper and a pair of MS bracket etc complete all as specified and directed. (Make : Premium quality of Hindware/ Parryware /HR Johnson).

S&F 15mm Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed(Model : 8903 Make : Prayag OR EQUIVALENT RANGE OF Jaquar, JOHNSON).

S&F in repair vitreous china urinal, half stall type white (excl of flushing cistern and flush pipe & waste pipe) fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and incl 60mm long brass screw, urinal spreader of PTMT any colour fixing with 15mm dia pipe, pointing around urinal back in cement fixed as in complete all as specified and directed.

S&F in repair Grating round 100mm dia of CP complete all as specified and directed.

S&F in repair 125 mm size brass CP shower rose with or without joints including fixing to steel pipe or union complete all as specified.

S&F in repairs 32 mm bore waste coupling PTMT half or full threaded complete and all as specified and directed

S&F in repair Curtain rod Aluminium coloured powder coated fancy type curtain rod 20 to 25mm dia complete all as specified and directed .

S&F of Brackets suitable for fancy type curtain rod ( Make - Flywell ) complete all as specified and directed .

S&F of pvc fancy nobe for curtain rode suitable to fix to curtain rode.( Make - Flywell ) complete all as specified and directed .

S&F in repair Kitchen sinks with drain board made of stainless steel 1 mm thick with plugs washers & wastes including bedding in cement mortar to dwarf wall or incl. fixing cantilever brackets & connected to pipe , size overall 915 x 460 mm& bowl size 410 x 330mm complete and all as specified and directed.

M & L GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, incl cutting chasing in wall for concealing of pipe if required and including taking down complete all as specified complete all as specified and directed. Make : TATA / JINDAL / SWASTIK / PRAKASH.

M & L GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified incl taking down complete all as specified and directed. Make : TATA / JINDAL / SWASTIK / PRAKASH.

Fixing only GI water tubing of bore 20 mm with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and directed

Fixing only GI water tubing of bore 15 mm with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and directed

Cutting chases, pinning in brick wall , making good to facing where required and pointing in CM 1:3 to ends or edges of slabs and making good cutting exc. 10 cm but n.exc 20 cm girth. Etc complete all as specified and directed

Demolition of RCC of any description and in any position not otherwise specifically Provided for ( Reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L for RCC in 1:2:4 type B-1 using 20mm graded stone aggregate as in slab supported on walls and column in floor, roof landing, balconies, canopies deck slab and in shelves and man hole covers and the like including all necessary form work complete all as specified and directed.

M & L mild steel TMT bars,10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality conforming to Grade-I IS-432 (Part -I), complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and directed.

M&L for preparation of new surfaces of wood of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for complete removal of old existing treatment on walls, cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds, moss and efflorescence salt and trading oil decorated surface of walls and applying a coat of wall care putty of approved make as on wall surface and two coats of oil based distemper (white or tinted) complete all as specified. Make (Asian/Berger/Neorolac)

M& L for two coat white wash on ceiling after Complete removal of existing treatment complete and all as specified and directed

M & L for 18 to 19 mm thick particle board medium density flat pressed single layer type or three layer type with BWR type adhesive fixed with screw to timber frame work complete all as specified and directed

M&L IInd class hard wood plain fillets, square , rectangular or triangular in section ,clean sawn ,secured with screw, sectional area exc 6 sqcm but n exc 13 sqcm , complete all as specified and directed

S&F 125mm long hasp and staple aluminium anodised including bolt to hinge plate and fixed screw complete all as specified and directed

nautiyalandcompany

shreyansh construction

Nanda Brothers

Alankar Traders

M/S A.K GARG

AJAY KUMAR CONTRACTOR

m/s rajesh bros.

VINAYAK CONSTRUCTION COMPANY

sagar associates

VERDHMAN ASSOCIATES

A ONE BUILDERS AND ENGINEERS

Bhardwaj Construction Co