Bid Documents for Providing, Installing and Testing of L.E.D Street light Fixture with Tubular Pole at Various Locations at Santrampur Nagarpalika Dist: - Mahisagar under SJMMSVY 2023-24 4th Attempt

Name of Work: Bid Documents for Providing ,Installing and Testing of L.E.D Street light Fixture with Tubular

Pole at Various Locations at Santrampur Nagarpalika Dist:- Mahisagar under SJMMSVY 2021-22 and 2023-24

SCHEDULE - "B1"

Name of Work :Providing ,Installing and Testing of L.E.D Street light Fixture with Tubular Pole at

Pratappura Road Santrampur Nagarpalika

Item No. Item Total Qty. Rate Per Amount

Supplying & erecting Steel tubular pole (Swaged)

confirming to IS - 2713 (Part-II)

Manufacturing process of steel tubular pole should

be as per IS specification. Basic steel tube should be

ISI Marked. Pole should be painted by one coat of

Zinc comet Primer and two coat of Aluminium

/approved paint to be erected on / in existing

Foundation. The length of poles are as below.

(C) 9.0 mtr. Long Swaged Steel tubular pole (i)

Pole as per IS code 410-SP-25 with 300 X 300 X

mm base plate with necessary G.I. J Bolts

(Approximate weight 78 Kg) For burial erection

(ii) Add Extra for M.S. Base plate 300 X 300 X

mm for pole, mounting on surface of foundation on 46.00 982.73 Ea.

GI foundation bolt. with required stiffeners.

(iii) Add Extra for PU base primer and PU Paint on

Providing and erecting street light pole bracket

comprising main B class MS pipe of 4.2 cms.out side

dia complete with suitable sleeve tubing 45 cms long

M.S. Pipe (medium class) Suitable for

mm/80mm/required size of pole top having

2 sufficient fastners for fixing the brackets and having

spread of 1.5mtr length with 110 deg with vertical

plane & suitable welded stays, reducer, and with

check nuts complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms.

[B] Double Arm Bracket 1.5 Mtr 46.00 916.07 Ea.

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.))(A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage

protection. (iv) above 90 to 120 watts

SANTRAMPUR NAGARPALIKA, SANTRAMPUR

Providing & erecting approved make street light /

wall mounting junction box compression moulded

from SMC ( thermoset Plastic) vertical sliding cover

4 having locking with square head stud loop in / loop

out in built terminal suitable for four core cable,

waterproof of I.P 54 protected with clamp or built

nut & earth bolt of following size

Providing and erecting Miniature circuit breaker

single pole 6A to 25 A suitable to operate on

5 V.A.C system and having breaking capacity 10 KA to

be erected in existing box, confirming to IS 8828 /

1996 with ISI Mark Cat-III

Providing & erecting XLPE (IS:7098) (I)-88 ISI

unarmoured cable multistrand Aluminium conductor

6 for 1.1 KV to be laid on wall with necessary clamps

or in existing trench / pipe at road crossing or floor

of following size of cables.

(A) 2 core 2.5 sq.mm 414.00 101.00 Rmt

Providing & erecting XLPE (IS:7098) (I)-88 ISI

armoured cable multistrand Aluminium conductor for

7 1.1 KV to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cables.

(A) 4 core 4 sq.mm 972.00 117.16 Rmt

Supplying and erecting B Class Galvanised iron pipe

having smooth finished bore of the pipe on both

8 ends erected nuts and bolts along the pole/ wall

shaping the pipe as per site requirement Pipe dia as

Providing & Laying approved make Double walled

corrugated pipes (DWC) of polyethylene (conforming

to IS 14930 II) with necessary connecting

9 accessories of same material at required depth for

laying of cable. Below ground / road surface for

enclosing cable and back filling the same to make

ground as per original

(A) 50 mm Outer dia 972.00 62.62 Rmt

Providing 1:2:4 cement concrete foundation & 70%

PCC from bottom including excavation for the pole of

size 60 x 60 x 120 cms. Deep in below ground level

10 with plinth of 45 cms x 45 cms(or 45 cms dia x

cms) high upper ground level with necessary curing

and finishing in approved manner. ( for 7.5 & 8/9

Add 18% GST Charge

Add 3%Contingency Charge

SANTRAMPUR NAGARPALIKA, SANTRAMPUR