SR to Repairing of Nayab Jilla Election kacheri at Morbi Jilla Seva Sadan ( By providing Toilet Renovation, Plaster, color, Door-Window, Furniture etc.)

Name of Work :-SR to Repairing of Nayab Jilla Election kacheri at Morbi Jilla Seva Sadan ( By providing Toilet Renovation, Plaster, color, Door-

Window, Furniture etc.)

=// Bill of Quantities //-

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

1 190.00 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas SqM 49.12 Rupees Fourty Nine Paise Estimated

and disposal of unserviceable materials with all lead and lift. Twelve Only

2 5.00 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing Each 414.23 Rupees Four Hundred

tank etc. including stacking the materials with all lead and lift. Fourteen Paise Twenty

3 323.00 Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C SqM 19.89 Rupees Nineteen Paise

member including stacking of serviceable material and disposal of unserviceable from site Eighty Nine Only

of work with all lead and lift

4 562.00 Removing dry or oil bound distemper by a washing and scraping and sand papering the wall SqM 11.53 Rupees Eleven Paise Fifty

surface smooth including necessary repairs to scratches complete. Three Only

5 15.00 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior SqM 108.58 Rupees One Hundred Eight

plastering upto floor two level and finished even and smooth in (iii) Cement mortar 1:6 (1- Paise Fifty Eight Only

6 323.00 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half SqM 141.48 Rupees One Hundred

brick walls for interior plastering upto floor two level and finished even and smooth in (iii) Fourty One Paise Fourty

Cement mortar 1:6 (1-cement:6-sand) Eight Only

7 562.00 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of SqM 40.59 Rupees Fourty Paise Fifty

approved brand and manufacture on new wall surface to give an even shade including Nine Only

thoroughly brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

8 562.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on SqM 84.37 Rupees Eighty Four Paise

undecorated wall surface to give an even shade including throughly brushing the surface Thirty Seven Only

free from mortar droppings and other foreign matter and sand papered smooth.

9 28.00 Providing and laying coloured glazed tiles of the skirting, risers of steps and dedo on 10 SqM 1488.24 Rupees One Thousand Four

mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry Hundred Eighty Eight Paise

etc. complete as seletced and diretced by Engineer-in-charge. Twenty Four Only

10 61.00 Providing and Fixing Impulse Blackout Roller Blinds with fabric of 0.53mm thickness and SqM 1768.51 Rupees One Thousand

Top channel of non-rusting aluminium alloy with 1.25mm thickness and bottom channel of Seven Hundred Sixty Eight

1.50mm thickness & 21mm diameter. Tilt channel of ABS plastic with 1.50mm polyster Paise Fifty One Only

cord with 4.50mm balls with stop lock arrangement including all necessary fixture, fastners,

fittings, labour, material, machinary etc. complete as seletced and diretced by Engineer-in-

11 59.00 Providing and fixing Mosquito net shutter and fixed to all size window with frame shutter SqM 2397.50 Rupees Two Thousand

frame vertical Moving. with necessary closer, fixtures and fastening rubber biding clips etc. Three Hundred Ninety

complete. Seven Paise Fifty Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

12 15.00 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 72.65 Rupees Seventy Two Paise Estimated

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Sixty Five Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

13 15.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 91.84 Rupees Ninety One Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Eighty Four Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

14 15.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 195.67 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Ninety Five Paise Sixty

wall with the help of clamp at every two metre C/C or shall be concealed as directed Seven Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

15 5.00 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) Rmt 876.90 Rupees Eight Hundred

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, Seventy Six Paise Ninety

& fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, Only

pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every

mm center to center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

16 5.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated No 186.83 Rupees One Hundred

screws down Bib Tap. (i) 15mm dia. Eighty Six Paise Eighty

17 1.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia. No 186.83 Rupees One Hundred

18 1.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets No 1581.77 Eighty Six

Rupees OnePaise Eighty Five

painted white including sutting holes and making good the same but excluding fittings.(A) Hundred Eighty One Paise

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. Seventy Seven Only

19 1.00 Providing and fixing wash down water closet Rimless, Blind Installation Wall Hung WC No 3800.63 Rupees Three Thousand

Pan with UF soft close slim seat cover of Jaquar or equivalent Brand with integral P or S Eight Hundred Paise Sixty

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) Three Only

with Seal and cover Complete.

20 1.00 Providing and fixing Metropole Flush Valve Dual Flow 40mm Size Concealed Body with No 1741.24 Rupees One Thousand

Exposed Shut Off Provision of Jaquar or equivalent Brand as directed by Engineer in charge Seven Hundred Fourty One

and where directed etc. complete. Paise Twenty Four Only

21 1.00 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x SqM 1175.56 Rupees One Thousand One

1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation Hundred Seventy Five Paise

with 5 mm thick frosted glass as details etc complete for Ventilation Fifty Six Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

22 2.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali Each 586.27 Rupees Five Hundred Estimated

of the following nominal diameter of self cleansing design with C.I scread down or hinged Eighty Six Paise Twenty

grating including the cost of cutting and making good the walls. Seven Only

23 1.00 Providing and fixing chromium plated brass half trun flush cock of approved quality Each 263.77 Rupees Two Hundred Sixty

including fixing in pipe line etc. complete.(ii) 25mm dia. Three Paise Seventy Seven

24 1.00 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, SqM 354.69 Rupees Three Hundred

shanks and back nuts. (ii) 20mm dia. Fifty Four Paise Sixty Nine

25 1.00 Providing and fixing Urinal or approved quality including conecting the Urinal with waste SqM 1074.86 Rupees One Thousand

pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x Seventy Four Paise Eighty

260mm x 350mm Six Only

26 172.00 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and SqM 1195.02 Rupees One Thousand One

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white Hundred Ninety Five Paise

cement slurry Two Only

27 14.00 Providing and Arranging Cushioned Seat & back, P.P. outer back cover, P.P. arms, Single No 5494.40 Rupees Five Thousand Four

back lock, Push back mechanism, gas lift for seat height adjustment, five prong Nylon base Hundred Ninety Four Paise

with twin wheel nylon castor including all materials and labour etc. complete as per drawing Fourty Only

and instruction of engineer-in-charge. Size : Min. Height 1040mm, Seat : 500mm x 500mm,

Back : 500mm x 440mm.

28 1.00 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden Each 616.42 Rupees Six Hundred

plugs with C.P. brass scews.(B) 600mm x 20mm size. Sixteen Paise Fourty Two

29 5.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 170.36 Rupees One Hundred

having National Sanitation Foundation (NSF) seal for potable water of following dia. Seventy Paise Thirty Six

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only

complete.[A] 15 mm.

30 5.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 253.82 Rupees Two Hundred Fifty

having National Sanitation Foundation (NSF) seal for potable water of following dia. Three Paise Eighty Two

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only

complete. [C] 25 mm.

31 5.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 447.72 Rupees Four Hundred

having National Sanitation Foundation (NSF) seal for potable water of following dia. Fourty Seven Paise Seventy

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Two Only

complete. [E] 40 mm.

32 1.00 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on No. 859.41 Rupees Eight Hundred Fifty

6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws Nine Paise Fourty One Only

33 6.00 Providing and Arranging fix chair having structure of CRCA M.S. pipe 20mm dia. and 16 No. 3949.10 Rupees Three Thousand

guage with 50 micron powder coated of approved seat and back 40 density PU foam Nine Hundred Fourty Nine

covered with fabric of approved shade and texture with one year replacement warranty. Paise Ten Only

Wooden armrest to be provided as per approved design. Complete chair should be in

suitable shape including all materials and labours etc. complete as per drawing and

instruction of engineer-in-charge.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

34 2.00 Providing and arranging PREMIUM EXECUTIVE REVOLVING CHAIR (High Back) No 21033.25 Rupees Twenty One Estimated

Sigma chrome Base with Knee Tilt Synchro Mechanism with Any Position back Lock, Seat Thousand Thirty Three

& Back - Made from High Density U - FOAM, Arms - Aluminium Die Casted with Cushion Paise Twenty Five Only

Pad. Including all materials and labour etc. complete as per instruction of engineer-in-

charge. Size : max. Height : 1290mm to Min. 1170mm, Seat : 530mm x 520mm, back

35 1.00 Providing and supplying Wooden Computer table (Modular type) having size 1220 (L) x No 17372.00 Rupees Seventeen

700 (W) x 1200 (H) mm with box size 0.45 x 0.53 x 0.70m height with 3 drawers with Thousand Three Hundred

keyboard tray, using 18mm / 12mm / 6mm thick plywood, laminate sheet, teak wood, Seventy Two Only

lumpsum two glass, necessary hardware, fixtures and fastening including cosf of labour

charges, CPU trolley, polishing were required etc. as per sample approved and as directed

by the Engineer in charge.

36 3.00 Storage Locker : Providing , fixing and Arranging 45mm deep using Powder Coated Sqmt 16144.85 Rupees Sixteen Thousand

meterial welded construction excluding leveller construction 0.8 mm thick (+/- 0.08mm) 20 One Hundred Fourty Four

Gauge CRCA sheet for shelf,0.8mm thick (+/- 0.09 mm)High yield strength CRCA sheet for Paise Eighty Five Only

doors and back,0.9mm thick(+/-0.08mm)CRCA sheet for all other components, CRCA sheet

'D' grade high yield strength as per IS : 513.Locking and Handle Mazak handle and three

way locking mechanism with shooting bolt.Shelving height wise adjustable shelf mounting,

Uniformly Distributed load capacity per each shelf is 40Kg maximum,4Nos.of adjustable

full shelf and box file A4 size (85w x 345H x 285D) can be stored vertically on three

shelves and clear space above fourth shelf is 240mm. Finished with epoxy powder coated to

the thickness of 50 microns (+/-10) including all necessary fixtures, fastners machinary etc.

complete as per photographs / Drawing and directed by Engineer in Charge.

37 1.00 Providing and Arranging three seater wooden sofa made from Indian teak wood with No 44427.88 Rupees Fourty Four

melamine polish. Seat made from 100mm thick 40 density foam with 25mm thick supersoft Thousand Four Hundred

HD covered for softness. seat to be kept on high density nylon elastic belt inside Twenty Seven Paise Eighty

Framing size 50mm x 37mm support armrest, legs and outer frame having size Eight Only

80mm x 37mm with inner brace between armrest and seat frame having size 25mm x

50mm as showing the photographs. Back 80mm thick 40 density foam with 12mm thick

supersoft HD covered for softness. Seat and back covered with high quality fabric

approved shade and wooden armrest Including all materials, hardwares and labours

etc. complete as per drawing / photographs & detail and as directed by Engineer-in-charge.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

38 1.00 Providing and Arranging two seater wooden sofa made from Indian teak wood with No 30606.03 Rupees Thirty Thousand Estimated

melamine polish. Seat made from 100 mm thick 40 density foam with 25 mm thick supersoft Six Hundred Six Paise

HD covered for softness. Seat to be kept on High density nylon elastic belt inside. Three Only

Framing 50 mm x 37 mm support. Outer frame 80 mm x 37mm. Back made from

mm thick 40 density foam with 12mm thick supersoft HD covered for softness. Seat and

back covered with high quality fabric of approved shade (Basic Rate Rs.400/ Rmt) and

wooden arRAest Including all materials and labour etc. Complete as per drawing /

photographs & detail and as directed by Engineer-in charge.

HOF MAKE : coza Size : 1320 mm x 750 mm x 750 mm (H)

39 22.00 Repairs and Re-fitting of doors, window and Cup Board shutters by providing necessory SqM 1313.05 Rupees One Thousand

non teak wood member, glass/Acrylic sheet and necessry hardware fitting and including Three Hundred Thirteen

touching the new member by matching existing oil painting, shed etc. complete as directed Paise Five Only

including all cost of labour and materials.

40 11.00 Providing and fixing High-Quality Canvas Printing Poster apply on Wall Using necessary SqM 1498.84 Rupees One Thousand Four

material etc. complete as per directions of Engineer - in -Charge. Hundred Ninety Eight Paise

41 3.00 Providing and fixing CUPBOARD shutters using 19 mm thick waterproof ( ISI 710) and SqM 2597.72 Rupees Two Thousand Five

fixing 0.8 mm thick decorative lamination sheet 20 mm x 2 mm Plywood frame Hundred Ninety Seven

having a size 7 cm x 4 cm using necessary fixtures, fastening, nails, fevicol, ball catch, Paise Seventy Two Only

magnet and innerside of cupboard oil painting two coats with primer coat etc. complete as

per detailed drawing.

42 3.00 Providing and Arranging Office table cum Computer Table Top and Leg 40mm thick made SqM 21946.29 Rupees Twenty One

from 18mm thick MR grade plywood and approved quality laminate. Appron to be made Thousand Nine Hundred

from 18mm thick MR grade finish with approved quality laminate. Provision for Open Leg Fourty Six Paise Twenty

space with Draw and sound system and cable manager shall be made as per the requirement Nine Only

Including all materials and labour etc.complete as per detail drawing and instruction of

engineer-in-charge.

43 3.00 Providing and Fixing Acrylic boards used for government office incumbency displays are SqMt. 3260.28 Rupees Three Thousand

typically governed by high-quality standards to ensure clarity, durability, and a professional Two Hundred Sixty Paise

finish. Twenty Eight Only

44 1.00 Providing and Arranging tea table made from 37mm x 37mm size Indian teakwood leg and Each 6121.61 Rupees Six Thousand One

top frame made from 37mmx 75mm Indian teakwood having 18mm thick Ply and approved Hundred Twenty One Paise

quality balancing laminate at bottom for shelf made with surrounding Indian teakwood Sixty One Only

frame of size 37mm x 12mm. The top having 12mm thick frosted glass with edge finish to

be placed properly in groove made. Surface to be finished with melamine polish including

all materials and labours etc. complete as per drawing and instruction of engineer-in-charge.

45 2.00 Providing and fixing DOOR CLOSER std. at desired location as instructed Including all Each 1872.54 Rupees One Thousand

materials and labour etc. complete as per detail drawing and instruction of engineer-in- Eight Hundred Seventy

charge. Two Paise Fifty Four Only

Amount in Words :

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

Rupees Ten Lakh Eighty Eight Thousand Four Hundred Ninety Three Paise Sixty Four Only Estimated

I / We am/are willing to carry out the work at ......................................................………………... % above / below (Should

be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

Estimated amount Estimated amount

Put to tender Rs. …………………… Put to tender Rs…………………..

Add……….. % above Rs. …………………… Deduct…….% below Rs…………………..

Total Rs. …………………… Net Rs…………………..

In words……………………………… In words……………………………………….

[1] The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

[2] The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

[3] GST and Income tax TDS will be deducted at a source while making payments of bills

[4] In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division