Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.2 LAccepted-Finance | L1 | Accepted-Finance Technically qualified | |
| 2 | L2₹12.3 L+₹1.1 L (9.59%)Accepted-Finance | L2 | Accepted-Finance Technically qualified |
Tender Value
₹9.8 L
EMD Value
₹20,000
Closing Date
30 Jan 2020, 5:00 pmClosed
Executive Engineer
Elect. Division HPPWD Palampur
Const. of Trauma Centre (additions and alterations) in Casualty block 500 bedded Hospital Dr.RPGMC Kangra at Tanda, Distt. Kangra (HP) (SH- Providing E.I. and replacement of old FTL fixtures with new LED fixtures therein)
2020_PWD_34069_2
Elect. Div. HPPWD Palampur
Open Tender
Electrical Works
Item Rate
180 days
Tanda at Kangra
Please refer Tender documents.
10 documents required · 10 mandatory
₹350
Executive Engineer
₹20,000
11 May 2020
15 Jan 2020
31 Jan 2020
15 Jan 2020
30 Jan 2020
15 Jan 2020
Amount
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.
Group C.
Makes:- Switches:- l&T/ Legrand / Goldmedal and Wires :- KEI/ Havells/ Finolex.
Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
Makes:- KEI/ Havells/ Finolex.
Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.
Makes:- KEI/ Havells/ Finolex.
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.
2x1.5 Sq. mm.
2x6.0 Sq. mm.
2x 16 Sqmm
Makes:- KEI/ Havells/ Finolex.
Re-wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed Steel / PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable including dismantling of the existing wiring as required. ( including switch & bakelite sheet etc.)
Group C.
Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.
3x1.5 Sq. mm.
Makes:- L&T/ Havells/ Finolex.
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.
Makes:- L&T/ Legrand/ Goldmedal.
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.
Makes:- L&T/ Legrand/ Goldmedal.
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required.
Single pole. 6-32 Amp Cat-A.
Makes:- L&T/Legrand/ Hagger
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 Amps. Cat-A.
63 Amps. Cat-A.
Makes:-L&T/Legrand/ Hagger
Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 Amps. Cat-A.
63 Amps. Cat-A
Makes:-L&T/Legrand/ Hagger
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.
Double door-8 way
Double door-12 way
Double door-16 way
Makes:- L&T/Legrand/ Hagger
Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-
15 Liter capacity water heater (Cat-A)
Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required.
Exhaust Fan, Heavy duty, 300 mm sweep
Makes:- Havells / Bajaj /Usha/ Crompton Greaves
Providing, Installation, testing and commissioning of ceiling fan with modular step type electronic fan regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required.
Ceiling Fan 1200 mm sweep, Category-A
Ceiling Fan 1400 mm sweep, Category-A
Makes:- Havells (Velocity)/ Bajaj (Ultima) / Usha (New Prima).
Providing and fixing 25 Amp. MCB protected socket with sheet steel enclosure suitable for surface mounting as required complete in all respects and to the best satisfaction of Engineer-in-Charge.
25 Amp. MCB protected socket with sheet steel enclosure
Makes:- Havells (Cat No.: DHDMCDP0253025)/ Anchor/L&T or equivalent make.
Supplying and fixing recess mounted LED 1'x4' Luminaire, Full diffuser provides uniform light with the use of the latest technology 31 Watt (3100 lumen) 5700K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc. as required.
31 Watt LED, 1'x4' Panel Recess mounted
Makes:- Bajaj/Phillips/Wipro (Cat No. CRCO13R038HP57G1)
Supplying and fixing surface round type LED 18 Watt (1800 lumen), 6000K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.
18Watt LED, Round downlighter surface mounted
Makes:- Wipro/Phillips /Bajaj (Cat No. BGSLO SLEEK SURFACE 18W WH RD)
Supplying and fixing of LED Bulkhead with a nominal system output of 1000 lumens, pressure die cast aluminium housing, ingress protection - IP65 rating protection against dust & water with IK08 impact resistance, having lifetime of 25000 burning hours suitable for surface and wall mounting application as required complete with all accessories, connections, testing and commissioning etc.
LED Bulkhead, 10 Watt
Makes:-Wipro/Philips/Bajaj (Cat No. BIBWP 10W LED)
Providing and fixing decorative extruded tube fixture having high quality design suitable for LED tube up to 18Watt (1800 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz, including one no. LED tube rod 18 Watt complete with all accessories, connections, testing and commissioning etc. as required.
LED tube fixture 18 Watt
Makes:- Bajaj/Phillips/Wipro (Cat No. LL13-181-650 (Rod)/ WIO 921208 (channel)
Supplying and fixing integrated LED Cghannel Neutral White 10 Watt (1000 lumen), 6000K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.
Integrated LED Channel 10 Watt
Makes:- Bajaj (Cat No. BCLSB 10 NW)/ Wipro/Phillips
Supplying and fixing recess mounting 2'x2' size LED bottom opening cleanroom LED luminaire with the use of the latest technology 42 Watt (4200 lumens), 5700K made of CRCA housing and it should be compatible with specifications i.e. power factor ≥ 0.95, harmonic distortion ≤ 10% and efficacy ≥ 80 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.as required.
LED Panel 2'x2', 42 Watt Cleanroom
Makes:- Bajaj/Phillips/Wipro (Cat No. LC20-551-XXX-57-XX)
Supplying and fixing Wall-mounting fan 400 mm sweep of the following make & Cat. No.including testing, connections and commissioning as required complete in all respects and to the best satisfaction of Engineer-in-charge.
Wall fan 400 mm sweep
Makes:- Havells (Model: Platina)/Bajaj/Orient
pankaj saini
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_49475.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .