SPECIAL REPAIRS TO BLDG No. P-316, DSC MD ACCN AT NB(K)

Amount

Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area exc 1.5 sqm but not exc 4 sqm each of size complete all as specified and directed.

Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area not exc 1.5 sqm each of size complete all as specified and directed.

Taking down shutters of any description n exc 1 Sqm complete all as specified and directed.

S&F second class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 2nd class hard wood, 35mm thick factory made door shutters plain framed, panelled shutter with lock rail and panel of 12mm thick veneered water proof particle board the size of rails and stile as per IS -1003 klin seasoned and chemically pressure traeted complete all as specified and as directed.

S&F 2nd class hard wood, 35 thick Glazed skelton shutters open rebated and prepared to recive gauze etc (withoutsash bars) edges of framing ,plain chamfered or rounded fitted with cut and mitread beads for securing glass ectc size of members of shutters as specified in SSR Pt-I section 8 cl 24 (a).

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

M&L 16 to 18mm thick Rub wood as in cup board shutters shelves etc cut to shape as specified and fixed with screws complete all as specified and directed. Make: Rubco or equivalent make approved by GE.

M&L second class HW plain fillets square or rectangular in section area exeeding 13 sqcm but not exeeding 25 square cm fixed with screws fixed with screws complete all as specified and directed.

S&F in repair magnet catcher to wooden frame work complete all as specified and directed.

S&F mild steel work in hold fasts etc and similar small articles confirming to Fe-290 Gde E 165 fixed in plain cement concrete 1:2:4 type B1 using (20mm graded crushed stone aggregate) including treating with tar or coal tar black paint complete all as specified and as directed

S&F 100mm stainless steel hinges, and fixed complete all as specified and directed.

S&F in repair 30mm width of flaps Continous (Piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

M&L for 150mm size aluminium handle (ISI Marked) cast type anodized, fixed complete all as specified and directed.

M&L for 150mm size aluminium tower bolt (ISI Marked) anodized, fixed complete all as specified and directed.

S&F Floor door stopper of Aluminium alloy body and tongue , anodised with hard drawn steel spring, fixed in floor (overall length of cover plate 140mm) complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 75mm hasp and staple Aluminium anodised (ISI Marked) fixed with screws complete all as specified and directed. .

S & F Powder coated anodised aluminium 10mm dia hexagonal channel (decogrill) for grill fixed to upvc window/ ventilator frame with aluminium bidding complete all as specifed.Make : JINDAL or equivalent section from HINDALCO /INDAN A1 COMPANY or equivalent make in list of manufactures

Supply and fixing factory made UPVC any colour (as approved by User) casement window double panel one opening outside where glass is fixed and another opening inside where wire mesh fixed with provision for grill (measured seperately) fixing in middle with S.S friction hinges (300x19x1.9mm) made of small series) frame not less than 67X64mm & sash n less than 67X114mm both having wall thickness of 2.3+0.2mm and sibgle glass pane glazing bead of appropriate dimension (area of window upto 2.5 Sqm) comprising of uPVC multi chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 +0.2mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile) UPVC extruded glazing beads of appropriate dimension,EPDM gasket ,stainless steel (SS 304 grade) friction hinges,zinc alloy (white powder coated) casement handles,G.I.fasteners 100X8mm size for fixing frame to finished wall,plastic packers,plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners,mullion (if required) shall be also fusion welded including drilling of holes for fixing hard wares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed. (Note: The unit rate quoted by contractor excluded cost of glass/wire mesh/Deco grill and includes all other connected accessories. Net opening will be measured for payment purpose)

S & F sheet glasses, plain 4.00mm thick glazing all with aluminum beading & rubber gaskets etc exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed.

S & F sheet glasses, plain 4.00mm thick glazing all with aluminum beading & rubber gaskets etc not exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed.

S & F Figured glass, pin head type plain 4.00mm thick glazing all with aluminum beading & rubber gaskets etc not exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed.

Demolition of cement concrete unreinforced in any Position not otherwise specifically provided for complete all as specified and directed.

M&L PCC type B-1, 1:2:4 (12.5mm graded aggregate) 25mm thick complete all as specified and directed.

M& L for Glazed ceramic tiles in vertical surface 450X300X6-7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair face of brick work or concrte surface finished to receive tiles complete all as specified and directed.

M&L Non skid ceramic tile of size 400X400X6-7mm thick in floor including 2mm thick spacer shall be provided between the tiles and epoxy tile joint filling using Nitotile EPW (Fosroc) or equivalent approved by GE, over cement screed 15 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L non skid ceramic tiles of size 600X600X6-7mm thickness in floors with approved pattern including 2mm thick spacer shall be provided between the tiles and epoxy tile joint filling using nitotile EPW (Fosroc) or equivalent approved by GE over cement sreed 15 mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item No. 30 above as in skirting over cement backing coat 10mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L 75mm thick PCC Type CI 1:3:6 (20mm graded agg) as in plith protection finished even and smooth without using extra cement complete all as specified and directed.

M & L for Prepolished machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L prepolished kota stone slab 18-20mm thick (in single piece ) in riser/thread of steps , skirting, dado and pillar laid over backing coat 10mm thick CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed.

M&L 18 - 20 mm thick makrana white Marble tile laid over cement screed CM 1:4 15 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete allas spcified as boarder to kota stone flooring complete all as specified and directed. .

Demolition of stone slabs of any description or thickness laid bedded in any motar complete all as specified and directed.

M & L for 18-20mm thick granite stone slab( Jet black )over cement screed 15mm thick in CM 1:4 over RCC Slab complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165. complete all as specified and directed.

Demolition of brick/PCC Block masonary work built in cement mortar complete all as specified and directed. .

M&L precast cement cocrete block masonary (Type C1 1:3:6 )with solid blocks exce 10 cm width and setting in motar 1 :6 complete all as specified and directed.

M&L for 18mm thick marine plywood covered kitchen cabinets, inside depth not less than 0.50M , water proof, termite & Borer proof, corrosion free with melamine polished shutter and auto closer counter sunk hinges, stainless steel handles complete all as directed . ( Note :(i) Only front facing area of cabinet will be measured for payment. (ii) Stainless steel baskets mentioned as supply only under Sl. item No. 44 of this AE shall be fixed under this item as the unit rate quoted against this item is inclusive of this fixing provision) all as specified and as directed .

Supply only a set of stainless steel baskets with fittings as in covered kitchen cabinet as per following details :- (i) Plate basket 21"x19"x8" - 01 No (ii) Plane basket 21"x19"x8" - 01 No. (iii) Plane basket 17"x19"x8" - 01 No. (iv) Butlery basket 17"x19"x4" - 01 No. (v) Cup & Saucer basket 17"x19"x4" - 01 No. (vi) Single pull out 8" - 01 No. (vii) GT- PT & Drip tray 22" - 01 No. (viii) Telescopic channels of appropriate size as required. ( Make : First quality of Sleek/ Ebco/ Dolin) all as specified and as directed.

Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M&L cement Plaser in two coats 8mm thick in CM 1:4 using WPC over 12mm thick in CM (1:6) on external surfaces is to be finished even smooth with out using extra cement with using Approved WPC complete all as specified and as directed.(Note : WPC shall be meassured separate item)

M&L for rendering 10 mm thick on fair faces internal cement plaster in CM 1:6 on fair faces of brickwork or concrete surfaces is to be finished even smooth with out using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick cement plaster in CM 1:3 on fair faces of brickwork or concrete ceiling surfaces on ceiling is to be finished even smooth with out using extra cement complete all as specified and as directed.

Supply only Integral waterproofing compound (ISI marked) complete all as specified and directed.

M&L for complete removal of existing suracfe finishes of external wall ( with mechanical means like grinding and washing with water jet) preparation of surface and apply one coat of alkali resistant exterior primer @ 0.9litre/10 Sqm to anti fungal paint over 1.5mm thick exterior grade wall care putty and allowed to dry over night before applying first coat of weather proof (premium acrylic emulsion paint alkali & fungal resistance,dirt resistance exterior paint) ) complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for preparation new plastered external wall surfaces and apply base coat to antifungal paint and allowed to dry overnight before applying first coat of weather proof (anti fungal paint) complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of weather proof paint (premium acrylic emulsion paint alkali & fungal resistance, dirt resistance exterior paint of required shade ) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac ) on primed wall surface using spray application or mechanical means, to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.

M&L for application of second coat of weather proof paint (premium acrylic emulsion paint alkali & fungal resistance, dirt resistance exterior paint of required shade ) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac ) over first coat on wall surface using spray application or mechanical means, to get a smooth and tint free surface complete all as specified and as directed. Note for item No. 49 to 52: (i) The old surface shall prepared using mechanical ways I.e., jet-spray, grinding etc., in such a manner that there should not be any impression of dent, all cracks to be filled with crack filler, water proofing primer in shaft/dampness areas and it should be made even all as per manufacturers instruction before application of putty base primer/base coat and emulsion paint. (ii). The work shall be got executed through authorised applicator of approved manufacturer. Authorisation letter of applicator shall be produced by the contractor before starting the work (iii) The contractor shall submit performance Guarantee certificate provided by manufacturer for a period of FIVE years from the certified date of completion of entire work. (iv) After preparation of surface exterior putty to be applied to make surface even to receive base coat and two coat of emulsion paint, the same shall be got approved by GE before each stage.

M & L for preparation new plaster on internal surface of wall and applying 2 mm thick wall care putty on new wall surfaces and & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer all as specified and directed .

M & L for preparation of new ceiling surface and applying three coats of white wash on ceiling all as specied and directed .

M & L for complete removal of existing treatment on internal surfaces of walls, and applying 2 mm thick wall care putty on old plaster surfaces, preparatory to distempering & applying two coats of distemper oil emulsion on primered surfaces all as specified and directed by Engineer in charge complete all as specified and directed.

M & L for complete removal of existing treatment & preparation of old surfaces and applying three coat of white wash on ceiling all as specied and directed .

M&L Preparation of old wooden surface of any description over 10cm in girth/width and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparation of new wooden surface of any description over 10cm in girth/width and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of anti corrosive paint over a coat of suitable primer complete all as specified and directed.

Taking down tar felt (water proofing treatement) on roof slab incl cleaning and removing tar felt material and disposing to a distance of exc 250m not exc 500 m complete all as specified and directed.

Dismantling single layer MP roofing tiles including ridges complete all as specified and directed..

M/L screed bed or bedding layer for roof of mortar 15mm in CM 1:4 (using WPC) for laying floor finishes etc complete all as specified and directed.

M&L for water proofing treatment with cement mortar 1:4 admixed with NitoBond SBr or equivalnt @ 1 litre per 50 Kg bag of cement. Down take rain water pipe Annuar space packing using Conbextra GP2 or equivalent mixed water and filling as per manufacturers specifications. water ponding for minimum for 48 hours and injection grouting of construction joints, leaking spot and honey combs with cementious pressure grouting with 40psi pump using Cebex 100 or equivalent @225 gms mixed to 50 Kg bag of cement incl joints packing using polymer modified mortar. Providing and applying water proof coating using fosroc Nitoproof 600 or equivalent, over dry surfaces and 1.5mm thick with 02 coats with interval period of 6 hours over a sustrata at a coverage rate of 2 Kg/ sqm using spray/ squugee/roller/brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90), tear resistance of 21Kn/m (ATMD624-00) and tensile strength of >1.9 N/mm2. Termination to be done on wall extending the coating to min 300mm height above the finalised floor level as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed before providing screed concrete of thickness 50mm including screed concrete 1:2:4 mix type B1 with approved water proofing compound to maintain drainage of water easily for roof complete all as specified and directed.

M&L for Mangalore pattern roof tiles interlocking at side joints laid dry complete all as specified and directed.

M&L Antitermite post costruction treatment along the external wall below concrete or masonry using chemical emulsion @2.25/linear meter including pluging holes etc complete all as specified and directed.

M&L Antitermite post costruction treatment under existing floors using emulsion one litre /hole300mm apart including drilling along external wall below including pluging holes 12 mm dia holes with CM1:2 to match the existing floors complete all as specified and directed.

M&L Antitermite post costruction treatment of voids in masonary using chemical emulsion one litre/ hole at 300mm interval incuding drilling hole at 45 degree and replugging them with motar 1:2 to match existing complete all as specified and directed..

M&L Antitermite post costruction treatment at all points of contact of wood work by chemical emulsion @0.5litre/ hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed..

Supply only15 mm bore pillar taps, cast copper alloy with capstan heads , Chromium plated screwed down high pressure with or without lettered "Hot " or "cold" with long screwed shanks and fly nuts , screwed for iron pipes but fancy type complete all as specified and directed.

S&F in repair vitreous china wash hand basin (padestal pattern), white, flat back, size 450mm x 300mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia including fixing of pillar tap complete all as specified and directed.

S&F in repairs viterous China wash down water closet pan (pedestal pattern), white incl plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float & handle incl brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs stainless steel soap dish fixed with screws complete all as specified. Make: Prayag cat No. BA 45 or equivalent manufactures mentioned in list of manufactures

S&F CP in repair Tubular towel rail, brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified

S&F in repair for SS towel ring of standard quality complete all as specified and directed.

S&F in repair Sink with drain board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl 40mm PTMT with coupling complete all as specified.

Demolition of 100mm AC or reinforeced concrete drain pipes, jointed in cement mortar and taking out of wall complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed in any length , with rubber rings joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia with access door fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm dia vent cowl complete all as specified and directed.

S& F PVC (SWR) 75mm dia vent cowl complete all as specified and directed.

S&F PVC Nahani Trap 110mm (SWR) floor trap, plain with grating including jointing with solvent or cement complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F 110mm dia PVC (SWR) T single junction with access door complete all as specified and directed.

S & F 75 mm dia PVC (SWR) T single junction with access door complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Grating round 110mm size of stainless steel (with/without hole for waste pipe) complete all as specified and directed.

S&F in repairs stainless steel plate rack of size 36inchX31InchX10 Inch made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8) SS screw and round pipe fixed to wall with screw s complete all as specified and as directed. [Make- Blue star sliver shine cat No KPR-315 or Equivalent from Nirali/Jain Brothers Sanitation Pvt Ltd (Jayna) as approved by GE

S&F in repairs 32 mm dia waste pipe for wash hand basin down pipe complete all as specified and directed

S&F Low density polythylene pipes (LDPE) 32mm of pressure rating 6kg/cm2 laid in trenches complete all as specified and directed.

M&L for removal of oil, dirt, laitance and other containments by manually and surface shall be fairy smooth finish. Chamfering the floor wall junctions with cement mortar 1:4 admixed with NitoBond SBr or equivalnt @ 1 litre per 50 Kg bag of cement. outlet & spout pipe Annuar space packing using Conbextra GP2 or equivalent mixed water and filling as per manufacturers specifications. water ponding for minimum for 48 hours and injection grouting of construction joints, leaking spot and honey combs with cementious pressure grouting witj 40psi pump using Cebex 100 or equivalent @225 gms mixed to 50 Kg bag of cement incl joints packing using polymer modified mortar. Providing and applying water proof coating using fosroc Nitoproof 600 or equivalent, over dry surfaces and 1.5mm thick with 02 coats with interval period of 6 hours over a sustrata at a coverage rate of 2 Kg/ sqm using spray/ squugee/roller/brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90), tear resistance of 21KN/m (ATMD624-00) and tensile strength of >1.9 N/mm2. Termination to be done on wall extending the coating to min 300mm height above the finalised floor level as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed before providing screed concrete in sunken floor. Make:- FOSROC or equivalent

M&L 50mm thick PCC (1:2:4) type B1 (Using 20mm graded stone aggregate) for sub base of sunken portion complete all as specified and directed.

M&L for PCC type E2 1:5:10 (40mm aggregate) in sunken floor of toilet/bathroom finished fair and even complete all as specified and directed.

M&L provide 50 mm dia UPVC pipe of pressure rate 10kgf/cm2 as water spout in sunken floor complete all as specified and directed.(Make:Prince/Supreme/Finolex)

S & F Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed.

S&F Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed .

S & F in repairs curtain rod 20 mm dia, anodised aluminium alloy fixed complete all as specified and directed..

S & F in repairs bracket for fixing curtain rods including end knobs (decorative type) complete all as specified and directed.

M&L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed.

M&L for Index hands (natural size) or arrows (upto 40cm long) complete all as specified and directed.

S&F peg set of 6 pin bathroom cloth hook hanger wall bedroom bathroom Robe hooks rail complete all as specified and directed.

S&F Rope wire dia 2.5mm for drying hanging clothes/clothes line/washing l ine/Rope wire for Terrace, Balcony, Indoor-25M Heavy Duty Steel wire with PVC coating including fasteners and instalation tool help to manage the rope complete all as specified and directed

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM 1:6 complete all as specified and directed.

M&L for cement mortar band (1:4) of size 70X40@300 C/C to 350 C/C for fixing MP tiles complete all as specified and directed.

M&L for Type D2 PCC 1:4:8 ( 40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Material and labour for 100 mm thick plain cement concrete (1:2:4) type B-2 using 40mm graded crushed stone aggregate as in hard standing, laid in alternate bays including necessary form work and finishing the surface of concrete fair and even without using extra cement complete all as specified and directed .

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A" 100mm thick slab complete all as specified and directed.

M&L for Hardcore of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for providing cement concrete Type B0, 1:2:4 (using 12.5mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm spreading and levelling in layers n exc. 25 cm thick andr well ramming including watering as required complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness ,M-35 Grade with grey cement and pigment complete all as specified and directed..

Internal Electrification:- Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, complete all as specified and directed.

M&L point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sqmm PVC insulated unsheathed FRLSH grade confirming to IS-694 multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic medium grade of suitable size with all conduit accessories on wall except beam, column and RCC roof and chases cutting incl 2 mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated sheet top cover for accomading switches socket regulators etc. incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for one light point controlled one, one way switch 5 Amp complete all as specified and as directed .

All as per item No. 115 but for One ceiling fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed .

All as per item No. 115 but for All as per item No. 2 above but for one bell/ buzzer point controlled by one push button complete all as specified and as directed .

All as per item No. 115 but for All as per item No. 2 above but for one light point controlled by two way switches complete all as specified and as directed .

All as per item No. 115 but for All as per item No. 2 above but for one 5 pin 5 amps socket outlet an independent board complete all as specified and as directed.

All as per item No. 115 but for All as per item No. 2 above but for one 5 pin 5 amps socket outlet on same board complete all as specified and as directed .

All as per item No 115 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board complete all as specified and as directed .

S&F switch piano flush type 5A one way complete all as specified and as directed .

S&F Bell push, flush type, 5 amp one way complete all as specified and as directed .

S&F switch piano flush type 6A two way complete all as specified and as directed. Cat Part No. 14112 of Anchor or any other make from approved list of manufacturer.

S&F S/S combination 3 pin 2 in 1 5 Amps flush type complete all as specified and as directed .

S&F S/S combination 6 pin 15 Amps flush type multi purpose complete all as specified and as directed.

S&F fan regulator electronic socket step type complete all as specified and as directed .

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals complete all as specified and as directed .

Supply and fixing of ceiling fan ,1200 mm sweep.230 volt, complete with hanging Rod and accessories complete all as specified and directed . make: model Efficiencia Neo (BLDC 26 W)of Havells or any other make from approved list of manufacturer.

Supply and fixing of heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep all as specified and directed .Model -turboforce SP of Havells or any other make from approved list of manufacturer.

S&F Buzzer, Ding Dong AC. 230 volts, single pole all as specified and as directed .

S&F in repair 10 W LED mirror light fitting, 110 Lum/Watt, with tube and provided with high output diffuser including all electrical connection all as specified and directed by Engineer in charge. Make : Luker Model LST510P or any other make from approved list of manufacturer.

S&F in repair LED regal batten for LED tube light 1x20 watt, 120 Lum/Watt, with both side connection of Havells Cat Part No. REGALBATTENT8UPTO1x22WSSBSWH tube rod crystal steel glass T5 LED tube light both side connection 20 Watt complete all as specified and directed . Cat part No. CRYSTAL549T5DSTL8WLED865GLASS or any other make from approved list of manufacturer.

S&F in repair lamp holder, PVC/poly carbonate type with cord grip for batten fitting complete all as specified and as directed.

S&F LED bulb 9 Watt, B-22 (cool day light) complete all as specified and directed. Make luker Cat Part No. LBPC09CL or any other make from approved list of manufacturer.

Supply and Fixing building security light fitting LED 40W, 120 Lum/Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure dia cast aluminium housing with high power LED as lighting source and lens emended pc cover having top opening separate driver comartment with IP 66 protection and impact resistance of IK07 including GI bracket for wall mounting all as specified and directed . Make Havells Cat No. ENDURAPEARLNEOSL40WLED757PASYTOPC or any other make from approved list of manufacturer including taking down old one.

S&F Sheet metal enclosure Vertical TPN for DB's when MCCB's to be used 8 way with 250 amps bus bar double door IP 43 metal door complete all as specified and as directed. Make L&T cat No DBVTL008DD or any other make from approved list of manufacturer.

S&F MCCB 4 pole, 415 Volt fixed type 200 Amps with breaking capacity 36 KA complete all as specified and directed.

S&F sheet metal enclosures with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB all as specified and directed.

S&F in repair sheet metal enclosure SPN DB when MCBs to be used 8 way with 200 amps bus bar double door complete all as specified and as directed .

S&FMCB SPN 6 to 32 Amp ,240 Volts,10 KA all as specified and directed by Engr-in-Charge. Cat part No -BB20060B to BB20320B of L&T or any other make from approved list of manufacturer.

S&FMCB Sp 6 to 32 Amp ,240 Volts,10 KA all as specified and directed by Engr-in-Charge. Cat part No -BB10060B TO BB10320B of L&T or any other make from approved list of manufacturer.

M&L for taking down old submain wiring from existing position including all connection all as specified and as directed .

M&L for sub main wiring using proper colour coding 1100 Volts grade with 2 runs of 10 Sqmm (FRLSH) grade PVC insulated unsheathed multistranded copper conductor cable and 1 run of 10 Sqmm (FRLSH) cable as earth continuity wire drawn through and including PVC conduit medium grade not less than 25 mm dia with all conduit accessories concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface . Note - 2 runs of 10 Sqmm sub main wire and on 1 run of 10 sq mm submain wire for earthing and PVC conduit pipe with accesories shall be measured as one unit.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick burried directly in ground(earth pit not less than 2.25 metrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to galvanized iorn wire 4mm dia as earth up to 7.5 m distance and connected by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No 3 ( of SSR Part-I connected to earthing test point all as specified or indicated including provn of necessery excavation and earth work in any type of soil, PCC pit ,RCC cover 50 mm thick, reinforced with 8 mm dia TMT bars both ways @ 10 CM c/c, 20 mm bore medium grade watering pipe, water funnel, 15 mm bore GI light grade protection pipe, common salt, charcoal, dust,returning, filling in of soil, removal of soil to a distance not exceding 50 mtr etc including testing on completion complete all as specified. Note : The unit rate includes for protection pipe and earth lead upto 7.50 Mtr. Earth lead beyond 7.50 Mtr length shall be measured and paid separately.

Taking down old u/s earthing complete all as specified and as directed.

Supply & fixing, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches / ducts/Wall of size 3.5 core 50 Sqmm complete all as specified and as directed .

S&F GI tubing light grade of size 40 mm dia with all fittings laid in trenches complete all as specified and as directed ..

Excavation in trenches for not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in soft/loose soil including taking out faulty cable/cable, cable covers and GI pipe complete all as specified and as directed ..

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified and as directed .

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the Starting point complete all as specified and as directed .

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed .

Supplying and laying reinforced precast concrete cable cover, class LV, type 1, flat size 250mm x 150mm x 40mm complete all as specified and as directed .

Lightening Protection:- M&L for fixing aluminium strip 25x3.15mm with porcelain insulators,saddles and fixing screws etc for roof conductor and aluminium conductor above ground all as specified and directed

M&L for air termination single pointed aluminium rod 12mm dia and 30mm long all as specifed and directed

M&L for test point terminal block made of gunmetal of size 75x75x25mm drilled and screened including 3Nos 8mm dia 25mm long hexagonal headed screws all as specified.

M&L for fixing 32x6mm galvanised iron strip with saddles and screws etc complete all as specified and directed burried in ground

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mmx6 mm thick burried directly in ground(earth pit not less than 2.25 metrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below ground level connected to galvanized iorn strip 32 x 6mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron steel all shown in electric plate No 5 ( of SSR Part-i connected to earthing test pit all as specified or indicated including provn of necessery excavation and earth work in any type of soil, PCC pit ,RCC cover and frame, 20 mm bore medium grade watering pipe , water funnel, 40 mm bore GI medium grade protection pipe , common salt, charcol dust,returning, filling in of soil, removal of soil to a distance not exceding 50 mtr etc including testing on completion complete all as specified.

Taking down u/s lightining arrestors aluminium strip including porelian insulators saddles etc complete all as specified and as directed .

Taking down old air termination complete all as specified and as directed .

Taking old test point complete all as specified and as directed .

Taking down Old GI Strip complete all as specified and as directed .

Internal water supply: Supply and fix ion wall /concelealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings solvents of size 25 mm dia, including taking down old one complete all as specified and as directed.

All as per item No. 163 above but of size 20 mm dia complete all as specified and as directed.

S&F CPVC ball valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all as specified and directed.

S&F 15mm angle valve, quarter turn with flange, chromium plated for fixing with CPVC pipe and taking down old one complete specified and as directed . Make Cera Model No. F1018201 or any other make from approved list of manufacturer.

S&F of bib tap CP, quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/CPVC pipe of size 15 mm and taking down old, complete all as specified and as directed . Make Cera Model No. F2013151 or any other make from approved list of manufacturer.

Supply and fixing of swivel overhead shower (Minimum weight 40 grams ) of PTMT any colour with shower arm (minimum weight 40grams) 15 mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe and taking down old one complete and all as specified and as directed . Cat Part No. F7020108AB of Cera or any other make from approved list of manufacturer.

S&F concealed stop cock regular body, quarter turn with flange chromium plated with CP cup fancy type of size 20 mm and taking down old one, complete all as specified and as directed . Make Cera Model No. F1020362 or any other make from approved list of manufacturer.

S&F of kitchen sink cock quarter turn wall mounted with swivel spout not less than 150 mm and wall flange complete including taking down old one complete all as specified and as directed. Make Cera Model No. F1018251 or any other make from approved list of manufacturer.

S&F health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe, including taking out one all as per specified and directed. Make Cera Model No. F8030107AB or any other make from approved list of manufacturer.

S&F wall mixer (3-in-1) with arrangement for both Cold water, hot water and for over head shower, with bend pipe complete all as specified. Make Cera Model No. F1020401 or any other make from approved list of manufacturer.

Taking down old stop valve, stop cock, bib cock, swivel shower from existing position including all fittings all as specified and as directed.

S&F PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe and taking down old one, complete all as specified and directed.

Taking down GI tubing/PPR from walls, floors, shafts size 25 mm dia complete all as specified and as directed.

Taking down GI tubing/PPR from walls, floors, shafts size 20 mm dia complete all as specified and as directed.

S&F in replacement of Rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 litres incl taking out u/s old one .

Albert Rebello and Company

Powertech Engineers

Padmaja Specialities