Construction of Social Housing Colony at Lohna Palampur District Kangra

Amount

Cutting in earth work through mechanical means in all heights/depths and in all kinds of soil such as kankar, moorum, shingle and decomposed or soft rock, hard rock i.e. their intermediate classification and chiselling / wedging out of rock where blasting prohibited including saturated soils and filling in embankments etc. where necessary and disposal of all excavated unserviceable material in all leads and lifts including through mechanical transporation, the disposal of the unserviceable material will be done on approved dumping site. Any damage to the private/public property during execution will be restored by the contractor whatsoever the nature of the same may be. The serviceable materials will be stacked in specified dimensions in all leads and lifts as per the direction of the Engineer -in- charge.

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, and chiselling / wedging out of hard or soft rock up to all depths stacking the excavated soil not more than 3 meteres clear from the edge of excavation and then returning the stacked soil in 15 cms layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in- charge.

Excavation in drains and channels etc. in earth work including dressing of side and bed and disposing of excavated earth upto a lead of 20 metres and lift upto 1.50 metres disposed earth to be levelled and neatly dressed: Pick / Jumper Work.

Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete including carriage of material in all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts.

Foundation, footings, bases of columns etc and mass concrete.

Flat surfaces such as soffits of suspended floors, roofs including inclined surfaces up to any degree, landings and the like (i) Floors, etc. upto 200 mm in thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

Columns, Pillars, Posts and struts (i) Square, rectangular or polygonal in plan

Stair cases with sloping or stepped soffits excluding landing.

Beams, cantilevers, girders and lintels sides and soffits of beams, small ends of beams,beam haunching, cantilivers, girders, bressumers and lintels not exceeding 1 metre in depth in all heights from floors.

Edges of slabs and breaks in floors and walls under 20 cm wide.

Providing and laying cement concrete 1 : 4 : 8 (1 cement : 4 sand :8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 : 6 : 12 (1 cement : 6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 sand :6 graded stone aggregate 40 mm nominal size) excluding cost of centring and shuttring in Foundations and plinth. including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 sand :10 graded stone aggregate 40 mm nominal size) with 15 % plum and curing complete excluding cost of form work in retaining walls / bresast walls, the size of plums shall usually be 150 mm to 300 mm as per HPPWD Specification in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 : 8 : 16 (1cement:8 sand:16 graded stone aggregate 40mm nominal size) and curing complete on slab and floor excluding the cost of form work laid in depressed portion of slab including carriage of material in all leads and lifts.

Providing and laying cement concrete having strength of M-20 mixed design aggregate mechanically mixed and vibrated and curring complete excluding cost of form work and reinforcement for reinforced concrete works including carriage of material in all leads & lifts.

Foundation, Footings bases of columns and the like and mass concrete.

Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses, plinth and string courses etc. from top of foundation upto floor two level.

Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.

Columns, Pillars, Posts and struts upto floor two level.

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto all heights.

Providing & laying upto first floor level reinforced cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20mm nominal size) to give a smooth and even surface including centering and shuttering etc. but excluding cost of reinforcement including carriage of material in all leads and lifts.(i) Mouldings as in cornices windows sills etc. exceeding 15 cm in girth.

Providing and laying cement concrete having strength of M-20 mixed design aggregate mechanically mixed and vibrated and curring complete reinforced concrete chajjas not exceeding 10cm. thickness upto floor two level including finishing the exposed surfaces with cement mortar 1:3 (1cement : 3 Sand) to give a smooth and even surface centring / form work and curing complete excluding the cost of reinforcement including carriage of material in all leads and lifts.

Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.

Applying cement slurry on R.C.C . slab or cement concrete work using 2.75 kg of cement per sqm. of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of material in all leads and lifts.

Providing throating or plaster drip and moulding to RCC chajjas etc. including carriage of material in all leads & lifts.

Brick work using 2nd class common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.

Half brick masonry using 2nd class common burnt clay building bricks in superstructure in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.

Random rubble masonry/polygonal rubble masonry (uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20 mm nominal size) in cement mortar 1:6.(1 cement: 6 sand) including carriage of material in all leads & lifts.

Stone filling behind retaining walls including carriage of material in all leads & lifts.

Stone soling properly hand-packed filling interstices with spalls and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification 100 mm spread thickness (finished work including materials and labour) including carriage of material in all leads & lifts.

Providing Ivory coast wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position including carriage of material in all leads and lifts.

Providing and fixing 40mm thick door shuters with Masonite facing and rigid foam core ae per the instructions of Engineer-In-Charge including carriage of material in all leads and lifts.

Providing and fixing 40mm thick single/double leaf glazed window shutter made of Ivory coast wood having style and top rail and bottom rail 75mm width and chamferred edged moulding 20X12mm for glass panes complete including bright finished balck enamelled iron hinges with necessary screws including carriage of material in all leads and lifts.

Supplying and fixing plain glass 4 mm thick glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of material in all leads and lifts.

Providing and fixing Ivory coast wood 40 mm thick wire gauge shutters using galvanised MS wire gauge of IS gauge designation 85G. with wire of dia 0.56 mm for doors windows and providing and fixing 2nd class deodar wood chamfered edged beading of 20 x 12 mm including bright finished black enemelled iron hinges with necessary screws complete as per drawing and specification & as per instruction of Engineer-in-Charge.

Providing and fixing M.S. grills of required pattern in wooden /steel /pressed steel chowkhats of window etc.with M.S.flats,square or round bars with round headed bolts and nuts or screws or by welding complete of any design including carriage of material in all leads and lifts.as per Architectural Drg/ Design of HIMUDA.

Providing and fixing 40 mm X 3 mm flat iron hold fast 40cm long including fixing to with 10mm dia meter bolts nuts and wooden plug and embedding in cement concrete frame block 30cmX10cmX15cm in cement concrete 1:3:6 (1cement: 3 sand:6 graded stone aggregate 20mm noiminal size) including carriage of material in all leads and lifts.

Fixing Stainless steel sliding door bolt as per colour and shade approved by the Engineer-in-Charge with bolts and nuts screws etc. complete including carriage of material in all leads & lifts. (a) 300x16mm (Labour Rate)

Fixing Stainless steel tower bolt (barrel type) as per colour and shade approved by the Engineer-in-Charge with screws etc. complete including carriage of material in all leads & lifts. (Labour Rate)

Fixing Stainless steel handles as per colour and shade approved by the Engineer-in-Charge with necessary screws including carriage of material in all leads & lifts. (Classic, Everite or sheel marked) (Labour Rate)

Fixing 100 mm finished brass floor door stopper with rubber cushion screws etc., tosuit shutter thickness complete, including carriage of material in all leads and lifts.

Providing and fixing Chamferred edged cover fillets / beading 40mm x12mm section with wood screws in Door frame as covered moulding including mitering at junction in Ivory coast teak wood including carriage of material in all leads and lifts.

Fixing hydralic door spring of supiour quality with rubber cushion screws for shutter etc. complete including carriage of material in all leads & lifts.

Providing and fixing Digital glazed tiles any size/colour and 8 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1 :3 (1cement : 3 sand) and jointed with cement cement slurry including carriage of material in all leads and lifts.

40 mm thick cement concrete flooring 1:2:4 (1cement:2sand:4 graded stone aggregate 20 mm nominal size) laide one layer finished with a floating coat of neat cement including carriage of material in all leads and lifts.

50 mm thick cement concrete flooring 1:2:4(1 cement:2sand:4gradedstone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement,including carriage of material in all leads and lifts.

Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads and lifts.

Providing and laying Duro stone vetrified tiles any size 10mm thicness in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material in all leads and lifts.

Providing and laying vetrified tiles any size 8 mm thicness in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material in all leads and lifts.

Providing and laying 20mm. thick granite stone in flooring 20mm (average) thickness base of cement mortar 1:3 (1cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete including carriage of materials in all leads and lifts.

Providing and laying 60mm thick heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade including border or kurb block grey or coloured over sub-base off concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement:4sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Subbase concrete floor to be paid for separatly) including carriage of material in all leads and lifts.

Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer -in-charge including carriage of material in all leads and lifts.

Providing and fixing ridges or hips 60 cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer -in-charge including carriage of material in all leads and lifts.

Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials in all leads and lifts.

Providing and fixing on wall face 150 mm dia PVC (D-Plast) rain water pipes of working pressure not less than 4.5kg/Sqm including filling the joints with approved adhesive complete including carriage of material in all leads and lifts.

Providing and fixing on wall faces PVC(D-Plast) acessories for rain water pipes including filling the joints with approved adhesive complete,including carriage of material in all leads and lifts.

PVC Plain bend : 150mm diametre

PVC Plain shoe : 150 mm diametre.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in charge, (Base members of steel work shall be measured and paid separately) including carriage of material in all leads and lifts.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm of 1:2:4:mix (1 cement :2 sand :4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc. including carriage of material in all leads and lifts.(i) 150 mm diametre.

Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design including carriage of material in all leads and lifts.(i) 0.63mm thick sheet.

Conversion of G.I. sheet to rain water pipe 0.63mm thick and fixing the same including carriage of material in all leads and lifts.(i)100mm dia

Steel work welded in built up sections,trusses and framed work , including cutting , hosting,fixing in position and apply ing a priming coat of red lead paint, including carriage of material in all leads and lifts.

In beams joists channels,angles,tees,flats with connection plates or angle cleats as in main and cross beams ,hip and jack rafters, purlins connected to common rafters and the like.

In gratings framed guard bars, ladders, railling, brackets and similar works.

Providing and fixing stainless steel railing mark-36 pipe size top-2' pipe, post pipe 1" and 3' hight in staircase including necessary fittings and positions complete as per design approved by the Engineer-In-Charge including carriage of materials in all leads and lifts.

Applying a priming coat over new steel and other matel surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter scoured with wire brushes fine steel wool scrapper and sand paper complete including carriage of material in all leads and lifts. (a) With readymixed prming paint brushing red lead, red oxide/

Painting (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give fair and smooth surface including cleaning and surface of all dirt, dust and other foreign matter including carriage of material in all leads and lifts. (a) White enamel paint/Enamel paint other than white.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil ,grease,dirt and other foreign matter, sand papering and knotting-Ready mixed paint brushing wood primer pink, including carriage of material in all leads and lifts.

Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt ,dust and other foreign matter ,sand papering & stoping including carriage of material in all leads and lifts. (a) With enamel paint other than white.

Applying Birla white wall care putty two or more coats over plastered surface after thoroughly brushing the surfase free from mortar drops, dust, loose materials and other forign matter sand papered smooth to give final matter finish to the surface complete including carriage of materials in all leads and lifts. (i) In Wall surface / Ceiling

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc., including sand paper smooth complete including carriage of material in all leads and lifts.

6 mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand) including carriage of material in all leads and lifts.

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth in cement mortar 1:4 (1Cement:4 Sand) and finished even and smooth including carriage of material in all leads and lifts.

15 mm cement plaster in cement mortar 1:6 (1 cement : 6 sand) in single coat on fair side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts.

20 mm cement plaster in cement mortar 1:6 (1cement: 6 sand). in single coat on rough side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts.

Extra over item for finishing with a floating coat of neat cement slurry including carriage of material in all leads and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth Priming coat with distemper prime including carriage of material in all leads and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated ceiling and / or sloping roofs surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth Priming coat with distemper prime including carriage of material in all leads and lifts.

Providing plinth protection 50 mm thick in cement concrete 1:3:6 ( 1 cement:3 sand:6 graded stone aggregate 20mm nominal size) including finishing the top surface of concrete smooth including carriage of material in all leads and lifts.

Providing under layer for plinth protection of 75 mm thick ( unconsolidated) bed of dry brick / stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete including carriage of material in all leads and lifts.

Constructing Course rubble hammer dressed "U" shape opensurface drain with side wall 15 x 22 cm in cement morter 1:6 (1cement : 6sand) and inside plastering with cement plaster1:3 (1 cement :3 sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 cement :5 sand :10 graded stone aggregate of 40mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 cement :2 sand :4 graded stone aggregate of 20mm nominal size ) and finished with a floating coat of neat cement complete as per standred design including carriage of material in all leads and lifts.

Providing and fixing 40mm nominal bore galvanised M.S.tube (light grade) out let in cement mortar 1:3 (1 cement: 3 sand) including carraige of material in all leads and litfs.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mm X 2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X 40 mm X 6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint including carraige of material in all leads and lifts.

Providing and fixing bright finished brass 100 mm. Mortice latch with one dead bolt and a pair of levers, handles with necessary screws etc. complete (indian make of approved quality) including carraige of material in all leads and lifts.

Supplying and fixing woven plains G.I. wire fencing of mesh 50mm to 150mm to any type of standard rails, strainging bolts. etc. including provision of binding wire, staples etc. including carriage of material in all leads and lifts.

Providing weepholes in brick masonry/stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v) : 20 (H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of material in all leads & lifts.

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge. including carriage of material in all leads and lifts.

1620 (20 mm OD pipe).

2025 (25 mm OD pipe).

Providing and fixing polythene water storage tank for storage of water up to all heights keeping water hygenic and safe for drinking etc.moulded to seamless perfection from FDA approved grades of polythene (LDPE / HDDE / CIDPE) confirming to BIS-12701-1989 with 40 mm nominal bore galvanised steel scoure tube with fittings 25mm nominal bore galvanised mild steel over flow tube with fitting & mosquito proof coupling of approved municipal design 15mm nominal bore ball valve and as per direction of Engineer-in- charge including carriage of materials in all leads and lifts. (a) 1000 liters capacity.

Providing and fixing 110mm x 90 mm PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floors etc. complete including carriage of materials in all leads and lifts.

Providing and fixing high pressure a PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts.(a) 90 mm dia

110 mm dia

Providing and fixing high pressure PVC spigot and socket , waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.(a) 150 mm dia

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts.(a) 90 mm dia

110 mm dia

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.(a) 90 mm dia

110 mm dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.(a) 90 mm dia

110 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.(a)90 mm dia

110 mm dia

Providing and fixing PVC double equal branch with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts. (a) 90 mm dia

110 mm dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material in all leads and lifts. (a) 90 mm dia

110 mm dia

Providing and fixing PVC cowl (confirming to B.I.S specification) including carriage of material in all leads and lifts.(a) 90 mm dia

110 mm dia

Providing & fixing to wall ceiling and floor galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor confirming to BIS Specifications including carriage of material in all leads and lifts (a) 20 mm nominal bore

Providing and laying in trenches 40mm nominal bore galvanised mild steel tubes (medium grade), tube fittings (earth workin trenches to bemeasured and paid separately) including carriage of material in all leads and lifts.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts.

Fixing Single piece WC with PP soft close seat cover, hinges, fixing accessories and accessories set, cistern fittings, size :-370x690x680mm, Strap-300mm (Cat No:-CNS-WHT-8515300SPP Jaquar) including carriage of material in all leads and lifts. (Labour Rate)

Fixing vitreous china water closet squatting pan ( European type W.C.pan ) with integral "p" or "S" trap including jointing the trap with soil pipes in cement mortar 1:1 ( 1 cement:1 sand) seat and cover to be measured and paid for separatly including carriage of material in all leads and lifts.and confirming to BIS specification.Anglo Indian ( universal closet) (Labour Rate)

Fixing coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material in all leads and lifts. (Labour Rate)

Fixing white plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers. (Hindware, Cera.) (Labour Rate)

Fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material in all leads and lifts.(a) Flat back (i) 630mm x 450mm (Labour Rate)

Fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material in all leads and lifts. (Labour Rate)

Providing and fixing 32 mm dia M.I. Union for wash basin or sink including carriage of material in all leads and lifts.

Providing and fixing 600mm x 450mm bevelled edge mirror of superrior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers including carriage of material in all leads and lifts and confirming to BIS specifications.(Atul, Modi Guard, Saint Gobains)

Fixing C.P. brass towel rail complete C.P.brass brackets fixed to wooden plugs with C.P. brass screws , and confirming to BIS specifications 600mm x 20mm, including carriage of material in all leads and lifts.(Labour Rate)

Fixing Towel ring Square including all fixing accessories complete (Jaquar) including carriage of material in all leads and lifts. (Labour Rate)

Fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden plugs with C.P. brass screws, and confirming to BIS specifications,including carriage of material in all leads and lifts. (Labour Rate)

Fixing 100mm dia C.P. Brass shower rose with 15mm or 20mm inlet including carriage of material in all leads and lifts. (Labour Rate)

Fixing C.P. brass bib tap with capstan head 15mm dia, and confirming to BIS specifications including carriage of material in all leads and lifts.(Labour Rate)

Fixing wall mixing faucet for shower and bath hand shower with Angular and Rest Holder confirming to BIS specifications including carriage of material in all leads and lifts. (Labour Rate)

Fixing Mixer for kitchen sink with casted swinging spout at top confirming to BIS specifications, including carriage of material in all leads and lifts.(Labour Rate)

Fixing 20 mm dia Brass stop cocks including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)

Fixing C.P.brass angle valve 15 mm without nuts and pipe including carriage of material in all leads and lifts confirming to B.I.S. specification.(ESS-ESS/CZAR/NOVA)

Fixing one hole basin mixing Faucet including carriage of material in all leads and lifts.(Labour Rate)

Providing and fixing stainless steel kitchen sink of approved standard ISI make with double bowl and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting including carriage of material in all leads and lifts. (i) 610 x 510 mm with bowl depth 200 mm.

Fixing PTMT jet spray of approved quality and colour with one metre tube including carriage of material in all leads and lifts.(Labour Rate)

Providingand fixing P.V.C connection with brass unions including carriage of material in all leads and lifts. (a) 300/450mm length 15mm nominal bore.(ESS-ESS/ CZAR/ NOVA)

Providing and fixing 32mm dia C.P. brass waste for wash basin or sink:, and confirming to BIS specifications incldung carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)

Fixing C.P. brass Toilet paper holder and confirming to BIS specification incldung carriage of material in all leads and lifts.(Labour Rate)

Providing 200 mm wide cast iron Rungs with chequered or ribbed non slip surface including fixing in manholes with 200 mm x 200 mm x 100 mm cement concrete 1:3:6 (1Cement:3Sand:6graded stone aggregate 20 mm nominal size) including carriage of material in all leads and lifts

Supplying cast iron cover without frame for man holes for frame of internal dimension 455mm x 610mm rectangular C.I. Cover (light duty single seal pattern-1) the weight of cover to be not less than 23kg. including carriage of material in all leads and lifts

Providing and fixing 100 mm nominal size sand cast/ cast iron spun spigot and socket soil, waste and ventilating pipes (Lead caulked joints to be measured and paid for separately) incldung carriage of material in all leads and lifts.

Providing and fixing Cast iron cowl 100 mm nominal diameter including carriage of material in all leads and lifts.

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of material in all leads and lifts.

Providing and fixing stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5 and water tight C. I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg. I Square Mouth Traps : (i) 180mmx100mm size P or R type including carriage of material in all leads and lifts

Constructing manhole with RCC top slab in 1:2:4 mix ( 1 cement:2 sand :4 gradedstone aggregate 20mm nominal size) , foundation concrete 1:4:8 ( 1 cement :4 sand:8 gradded stone aggreagate 40 mm nominal size) in side plastering 15mm thick with cement mortar 1:3 ( 1 cement :3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( 1 cement:2 sand:4 graded stone aggregate 20mm nominal size) , finished smooth complete , curing and testing including carriage of material in all leads and lifts.(a) Inside size 900mmx 1200mm and 1000mm deep including S.F.R.C. frame and cover medium duty 500mm diametre internal size.With 200mm thick walls of brick masnory using common burnt clay building bricks in cement mortor 1:3 (1 cement :3sand)

Extra over item for every additional depth of 0.10 metre or part thereof of manhole including carriage of material in all leads and lifts.(a) From 1.5 metre to 2.0 metre

Cutting holes upto15cm x 15cm in R.C.C floors and roofs for passing drain pipe etc.and repairing the holes after insertion of drain pipe etc.with cement concrete 1:2:4 (1 cement: 2 sand : 4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof. including carriage of material in all leads and lifts.

KDN Infrastructure Pvt. Ltd.