Drilling of Bore wells and fixing of Motor pump sets to Tirunilayam, Hyderabad.

Drilling of Bore well with DTH Rig per RM: Drilling of Bore well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc. and drilling in over burden to dia not less than 200 mm etc and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979 and amended from time to time.

Drilling of Bore well 165 mm dia. up to 90.00 m depth

Drilling of Bore well 165 mm dia. above 90.00 m up to 150.00 m depth

Drilling of Bore well 165 mm dia. Above 150.00 m upto 250m depth

Drilling of Bore well 165 mm dia. Above 250.00 m upto 350m depth

Drilling of Bore well 165 mm dia. beyond 350m depth

Manufacture, Supply and Delivery of 180mm dia 6 Kg/Sq.cm Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes.

Manufacture, supply & delivery of High Density Polyethylene pipes 40mm OD 10.00 kg/sqcm (SDR 13.6) (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in 6 Metres.)

Installation, testing and Commissioning of the submersible pump set with all accessories as per the standard specifications for above 60mts and up to 120 mts including laying of G.I. Pipe duly providing the G.I. Pipe of not more than 3 meters length in the Bore well including all incidental charges etc., complete as directed during execution.

Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

Supply of 3 Core 2.5 Sqmm Flat Copper cable of ISI for Submersible Motors. Makes : Finolex / RR Kabel / Havells / KEI / LK / Pawancab

Supply and Transportation of star rated 5.00 HP 12-16 StageThree phase ISI submersible motor pumpset suitable for 6" Bore well. Makes: Texmo / CRI / KSB / Aryan Varsha / Lubi / Falcon

Supplying & fixing Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 25 mm NB Size.

S&F premium make CPVC Pipes of 28.60mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, etc.complete for finished item of work as directed by Engineer-in-charge

S&F premium make CPVC Pipes of 34.90mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, etc.complete for finished item of work as directed by Engineer-in-charge

Supply of 180mm dia Mild steel clamp set with Bolts etc., for use in Bore wells or any other suitable purpose complete as directed during execution.

Supply and fixing of PVC Bore cap suitable for 180mm dia PVC pipe used for bore wells including all incidental charges taxes etc., complete as directed during execution