Annual Rate Contract for Providing and Applying Hot Thermoplastic Road Marking Paint (Asian, Burger & As Per MORTH) with Glass Beads in NZ & WZ Bridges within Surat Municipal Corporation Limit. (Work No.1)

PROBABLE DATE OF OPENING TECHNICAL BID Dt.22/08/2026 10.00 hrs onwards (Probable)

TENTATIVE PRICE BID OPENING Dt.05/09/2026 10.00 hrs onwards (Probable)

ESTIMATED AMOUNT Rs. 92,84,388=52 (Excluding GST)

CLASS "D" or Equivalent and Experience

TENDER TO BE SUBMITTED TO:

THE CHIEF ACCOUNTANT,

SURAT MUNICIPAL CORPORATION, SHRI TAPIBHAVAN, TAPIPURA

SURAT MUNICIPAL CORPORATION

BRIDGE DEPARTMENT

Name of Work: Annual Rate Contract for Providing and Applying Hot Thermoplastic Road Marking Paint

(Asian, Burger & As Per MORTH) with Glass Beads in NZ & WZ Bridges within Surat Municipal

Corporation Limit.(Work No.1)

SCHEDULE - B S.O.R. 2024-25

DESCRIPTION Qty. Amount (Rs.) Remarks

NO. (unit) (Rs)

Road Marking With Hot applied Thermoplastic compound paint

with reflectorising Glass Beads on Bituminous/A.C.C./C.C. road

surface. Providing and laying of hot applied thermoplastic

compound 2.5 mm thick including reflectorizing glass Beads and

250gms per Sq.mt. area thickness of 2.5 mm is exclusive of Surface

applied glass beads as per IRC-35.The finished surface to be

level/uniform and free from streaks and holes or chipping of

1 Thermoplastic Rate includes brushing, brooming and cleaning and Sq.Mt. 15851.23333 367.72

application of paint.

NOTE: THE THERMOPLASTIC PAINT SHALL BE OF ASIAN,

BERGER & As per Ministry Of Road Transport & Highways

(MORTH) guidelines.

(a) Center Line / Edge line

Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks

Raised Pavement Markers made of polycarbonate and ABS moulded

body and reflective panels with micro prismatic lens capable of

providing total internal reflection of the light entering the lens face

and shall support a load of 13635 kgs. tested in accordance to ASTM

D 4280 Type H and complying to Specifications of Category A of

MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06.

The height, width and length shall not exceed 20 mm, 130 mm and

130 mm and with minimum reflective area of 13 Sqcm on each side

and the slope to the base shall be 35 +/- 5 degree. The strength of

detachment of the integrated cylindrical shanks, (of diameter not less

than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the

body is to be a minimum value of 500 Kgf. Fixing will be by drilling

holes on the road for the shanks to go inside, without nails and using

epoxy resin based adhesive as per manufacturers recommendation

and The color of the marker should be as per the IRC 35-2015 and

as directed by engineer in charge.(3M or Equivalent Brand)

Total Amount = ₹

Total Amount = ₹

Executive Engineer (Bridge Department)

Surat Municipal Corporation

Signature of Contractor