Guest House - Renovation of retirement hall

Amount

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tube

Supplying and fitting weld mesh 25x25mm 12 gauge welded to the existing alround framework.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Supplying padlock 65mm or nearest size (7 lever) best quality

Lab our engaged for miscellaneous works, coolie

Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately)

Providing and fixing precoated galvanised iron trafford sheets (size ,shape and pitch of corrugation as approved by Engineer-in-charge ) 0.35 mm (+0.05%),total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade ,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm)with EPDM seal ,complete upto any pitch in horizontal /vertical or curved surfaces , excluding the cost of purlins ,rafters and including cutting to size and shape wherever required.

Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately )