PROVN OF SOLAR SECURITY LIGHTS WITH POLE AT NAGTALAO UNDER GE BANAR

Amount

Excavation in trenches / post holes in hard/dese soil not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth for taking out and laying pipe lines not exceeding 10 Sqm on plan and getting out, excavated earth, forming bottom surfaces to required level complete all as specified.

Excavation in trenches / post holes in Hard Rock not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth for taking out and laying pipe lines not exceeding 10 Sam on plan and getting out, excavated earth, forming bottom surfaces to required level complete all as specified.

Returning, filling in, including spreading, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified.

Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified.

Material and labour for sand cushioning for under ground cable with locally available sand for protection of cable including spreading and consolidations complete all as specified.

Supply and laying un reinforced precast concrete cable cove class LV type 2 flat size 300mmx 180mmx40mm as specification complete all as specified.

Supply, Installation, Testing and Commissioning of 60W AIO ( all in one ) Hybrid solar street light incl 7 meter long hot dipped Galvanized iron OCTAGONAL Street light pole & 1.5 Sqmm 3 core copper cable from Junction Box to solar light. The bottom of pole shall be 130 mm dia and top shall be 70 mm dia with 3 mm thickness, high tensile strength & suitable size for Mounting Solar All in One Hybrid Street Light Fixture, base plate shall be 220 x 220 x 12mm with all fixing arrangement as per the below features: Aluminum Extrusion Housing with white powder coated finish providing effective thermal management & excellent corrosion resistance. Environment?friendly LED System. • Ingress Protection – IP65 • Impact Resistance – IK08 • Delivers excellent illumination & comfort with CRI of >70 • Designed Avg. LED Life (L70) 50,000 Burning Hours & with highly efficient Photobiologically safe LEDs. • High Efficiency Monocrystalline Solar PV module • Lithium Ferro Phosphate Battery (LiFePo4) • Powered by a high efficiency MPPT charge controller offering Over-Charge protection, Deepdischarge protection, over current protection, short circuit protection, Over voltage protection. • Autonomy – Up to 24 hours i.e. 2 nights with Preprogrammed Intelligent dimming profile • Indication ➢ Low Voltage – Red LED ➢ Charging Indication – Green LED ➢ Wide Operating Temp.: 0 to 50 Deg. C ➢ “Hybrid Function Provided, in case of low battery, LED glows via a AC supply. Make: Crompton, Model No: CSOP-847-60-57-HL5-HY-LM-PG or Equilant in Havells/ Legrand/Philips/WIPRO

Suply and Fixing of pole mounted junction box of outer size 240x130x110 mm made out of FRP body (hot moulded type) with IP-66 protection and locking with screws alongwith 6 Amp rating MCB SP-01 No. and up to 50 Amps rated 4 pole connector suitable to insert the cable size up to 16 sqmm x 4 core- 02 No. and din rail suitable for mounting the MCB/Connector etc complete in side box and duly fixed with 25x3mm FL clamps with nuts nolts of suitable size on GI OCTAGONAL Pole including cable glands ,aluminium lugs/thimbles.

Supply, laying and testing in trenches or fixing on wall or passing through pipe 1100 volts grade heavy duty cable XLPE Insulated multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and over PVC sheathed complete as per specification properly clamps on wall and connection at end point with all legs glands etc of following sizes. (a) 4 core 16 Sq mm

All item as per Ser No 9.00 above but 3.5 core 35 sqmm

M&L Cement concrete in foundations, filing, mass concreting etc., PCC 1:4:8 type D2 using 40 mm graded aggregate complete all as specified.

M&L Cement concrete in plinth, platforms, pole, pillars et., PCC 1:3:6 type C1, using 20 mm graded aggregate all as specified and directed by EIC

M&L Cement concrete in plinth, platforms, pole coping , pillars etc., PCC 1:2:4 type B1 , using 20 mm graded aggregate complete all as specified.

Supply, Installing,testing and commissioning of LT Panel factory made Outdoor type (CPRI) as per latest IS mark with minimum thickness of 3.15 mm dust and vermin proof, 3 phase 4 wire with rated operational voltage 415V, rated insulation voltage of 1100V and Impulse withstand of 12KV and minimum internal Arc with-stand of 65KA, 500 mSec as per latest IS mark, weather proof, with separate hinge door for each compartment with Operating handle & locking arrangement with back door common openable(screwed/Lockable) mounted on iron angle of 50x50x6 mm grouted in PCC 1:2:4 Complete. Painting as per defined 7 Tank process with epoxy powder polymerized at high temperature and aluminium busbar (TPN) suitable for 200A with double compression aluminium cable glands with the following accessories with IP 54 rating :- (a) Incoming - MCCB 125 Amp 4 pole 415 V 25 kA rating-01 no (b) Outing - (i) MCCB 63 Amp 4 Pole 415V 10 KA - 02 Nos (Il) MCB 40 Amp SPN 230V 10kA - 01 Nos . (Il) Spare MCB compartment - 01 Nos (iv) LED indicating lamps for main supply (R-Y-B) (v) Amp meter 0-200 Amp capacity (vi) Volt meter 0-500 Volt capacity

Supply and laying high density polyethylene pipe 40mm internal dia (HDPE) of pressure rating 6 kg/sq cm including all fittings laid in trenches or on wall with clamps complete with all fitting like tie bend union etc for passing of LT cable complete all as specified.

Anil Builders (BID ID -3126313)

Shri Electrical Enterprises (BID ID -3127972)

RISING ELECTRICALS (BID ID -3128552)

Sachiyay maa Electricals (BID ID -3128024)

S AND S Constructions (BID ID -3125427)

GITANSH ENGINEERS AND COMPANY (BID ID -3119843)

Nvimal Engineers and Contractor (BID ID -3121352)

Jeet Construction (BID ID -3128147)

UNITED ENGINEERING CORPORATION (BID ID -3128443)

Bhawani Enterprises (BID ID -3128527)