General

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of Machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters - 1 Rmt. up to 300 mm dia

Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping,laying concrete,curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. Bored cast-in-situ under reamed piles includig bore pile stem and under ream bulbs.

Filling with dust for trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH (revised RBR-FNDN-2.i)

Providing concrete for plain/reinforced concrete (M10) in open foundations using 40 mm Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Supply and placing of the Design Mix Concrete for M-20 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm H.B.G Metal including cost and conveyance of all Material like cement, Sand, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No.402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete (BLD-CSTN-2-14)

(a) For Widower Room, Office Room and Toilets

(b) For Columns Above Ground Level

(c) For Widower Room, Office Room and Toilets

For CHAJJAS - SUNSHADES

(d) For Widower Room, Office Room and Toilets

(e) For SLAB upto 150 mm thick

Providing High Yield Strength Deformed (HYSD) Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. ( APSS No.126)

Brick Masonary in C.M (1:6) using 2nd Class well burnt ground moulded traditional size bricks of locally available having a crushing strength of not less than 35 Kg./Sq.Cm & size of 23x11x7 Cm including cost & conveyance of Material to site, mixing of Cement Mortar & laying of bricks & mortar to specified thickness, watering, curing, including all scaffolding, hire & operational charges of Machinery, all Labour charges & all water lead charges etc. complete for finished item of work. (BLD-CSTN-3-1)

Plastering in C.M (1:3) 12 mm thick including cost and conveyance of all Material, Labour for mixing Material, laying and curing etc., complete - 10 Sq.M. (BLD-CSTN-6.2)

Ceiling Plaster: Ornamental Plastering 12mm thick in two coats, first with 8mm thick in C.M (1:6) prop and second with 4mm thick in C.M (1:3) prop including cost and conveyance of all Material to site, Screening and mixing, laying finishing with sponge finish and watering, curing including all Labour charges ,hire and operational charges etc., complete for finished item of work - 10 Sq.M.

Providing impervious coat to exposed R.C.C Roof Slab surface with C.M (1:3), 20mm thick with 1 kg of water proof compound per bag of cement laid over roof when it is green including cost of all Material, excluding conveyance charges of Material and including all operational, incidental and Labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work - 10 Sq.M.

Dadooing to walls with Glazed coloured Tiles of any size Ist Quality set over base coat of C.M (1:3) prop. 12mm thick and neat grey cement slurry of honey like consistency spread @ 3.3 Kg of cement/sqm and jointed with neat white cement paste at 0.20 kg/sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all Material Labour charges, water to work site, operational. incidental, mixing mortor, fixing in position, lift charges, curing, etc., complete for finished item of work - 10 Sq.M

Flooring with vitrified tiles of 1st quality, set over base coat of C.M (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kg/sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work (BLD-CSTN-7-5) - 1 Sq.M.

Flooring with ceramic tiles, set over base coat of C.M (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kg/sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all Material like cement, sand water and tiles etc., complete for finished item of work (BLD-CSTN-7-6) - 10 Sq.M.

Painting to the walls with 2 coats of Plastic emulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for Internal Walls and Celling. (Thrree Coats)

Painting to the walls with 2 coats of Acrylicemulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for External Walls. (Thrree Coats)

Painting with Synthetic Enamel paint TWO Coats of approved quality colour & graded-I over a primary coat of read oxide paint of grade-II to new steel works after the surface are thoroughly cleaned & scrapped including primary coat item of work, cost & conveyance of all Material, Labour charges etc. as per S.S & as directed by the departmental authorities for finished item of work - 10 Sq.M.(Total Three Coats)

Supply and fixing Aluminium Anodised Casement windows as per approved drawing with aluminium anodised sections of Series C Jindal Hollow sections and outer frame of 8804 of size 46 x 44 mm, Shutter frame of 8802 of size 44 x 46 mm and Mullion frame of 8803 of size 59 x 38 and glazing section of 4433 with plain clear float glass 6 mm thick fixed including supply and fixing aluminium powder coated 1 No.of casement friction stay hinges for each shutter, 1 Nos. aluminium handles of 150 mm for each shutter and all Labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including Labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work (BLD-CSTN-11-30) - 1 Sq.M.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single sutter Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.Door Frame section of 63.5x 100 MM .The two'Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member Providing and fixing 28-30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be| fixcd to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame and providing 6Nos of Z' hold fast, 2 Nos of 12" Aluminium aldrop, 4 Nos MS powder coated 6"| hinges, 1 nos of Aluminium Tower bolt 6", 2 Nos of 6" Aluminium handles, Aluminium door |Stopper,rubber,stop bushes and all labour charges and putup, fevicol gum, nails, complete for finished item of work as directed by the dept. Size of the door: (0.90 x 2.10 ms WPC frame (2.1 +2.1+0.9 +0.9) BMT-N.83.C = 1.89Sqm

Supply of 3 Core 6.0 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. (ELEC-1.6.3) Makes : As per list of recommended brands as category I

Supplying and fixing of 25mm Outer Dia. heavy duty (2.00 to 2.20 mm thickness) grade with IS.9537, Part-3 regid PVC Pipe of VIP/Besto plast/Goldmedal/Million plast/GM/Sudhakar/Polyline of ISI mark for CONCEALED IN ROOF SLAB with all required accessories including chisiling the wall where ever necessary including masonry work for Light/Fan Points and seperate plug point with MS deep junction boxes including all labour chartges etc. complete.

Supplying and fixing of 25mm Outer Dia. heavy duty (1.60 to 1.80 mm thickness) grade with IS.9537, Part-3 regid PVC Pipe of VIP/Besto plast/Goldmedal/Million plast/GM/Sudhakar/Polyline of ISI mark for CONCEALED IN WALLS with all required accessories including chisiling the wall where ever necessary including masonry work for Light/Fan Points and seperate plug point with junction boxes and bends of makes Gold medal/Million plast/GM/Sudhakar/Polyline /Bestoplast.Including all labour chartges etc. complete.

Supply of 22/0.3mm (1.5 Sqmm) FRLS / HFFR / ZHFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable. Makes: Finolex / RR kabel / APAR E-beam ELEC-1.5.2

Wiring with 2 runs of 14/0.3mm (1.00 Sq.mm) PVC insulated F.R flexible copper cable (ISI Mark) make of Havells/KEI/Polycab/Bonton/Gold Medal/V-Guard/GM Million/HPL/Finecab/Orbit in the existing pipe with 6-A/10-A 1 way 1 module switch make of Legrand Arteor/Schneider Zencelo/ Honeywell/Blenge plus, Ceiling rose of make Anchore/Gold Medal Oliv`e/Million Zoom and 8 modular horizontal/vertical cover frame make of Legrand Myrius/Cabtree Thames platinum/GM Four Five/Mullion Logus/Gold Medal Curve/CPL/Panasonic vision/Salzer S.90,Series covering to module box including all labour charges etc., complete for LIGHT POINTS, FAN POINTS & BELL POINTS in Residental Building.

Supply and fixing of 20W,1900 lumens T8,not less than 1100mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes : As per list of recommended brands as category II. ELEC-3.8.17

Manufacture, Supply and Delivery of R.C.C. Collars conforming to B.I.S. 458/2003 (rate per each collar) suitable for R.C.C. Plain ended pipes including transportation but excluding all taxes. 1200 mm dia

Manufacture, Supply, & Delivery of Unplasticised Non-pressure poly vinyl chloride(PVC-U) pipes of dark (any shade of brown) for use in underground drainage & sewerage system conforming to IS 15328/2003) with solvent cement jointing as per specification inclusive of transportation to the sub-divisional stores anywhere in A.P, excluding all taxes OD 160 mm

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) BMW-I.221

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks (BMW-G.01)

Supplying & fixing oval shape basin white (520x410mm)parry or equivalent (BMW-I.129)

Supply and Fixing of steel body tap 12.7 mm (1/2") Indian Make heavy duty including all type of necessary charges etc., complete as per SS (BMW-E.09)

Supplying & Fixing low down porcelain flushing tank 10 Lit Capacitywith internal components BMW-D.11

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap (BMW-D.13)

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm x 440 mm (BMW-D.04)

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 (BMW-D.33)

Supplying & Fixing of concealed stop cock 12.7mm (1/2") Indian make heavy duty (BMW-E.03)

Provision for Seignorage Charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.749 %

Unforeseen item