Construction of Boys Hostel Building with Canteen for Tribal Development at Jamnagar.

Name of Work : CONSTRUCTION OF BOYS HOSTEL BUILDING WITH CANTEEN BUILDING

FOR TRIBAL DEVELOPMENT AT JAMNAGAR.

BILL OF QUANTITIES

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

1 Excavation for foundation in Dense or Hard soil incl. 595.00 Cum. 161.07

sorting out and stacking of useful materials and

disposing of the excavated stuff with all lead and lift.

2 Excavation for foundation in Hard Murrum incl. 606.00 Cum. 273.44

sorting out and stacking of useful materials and

disposing of the excavated stuff with all lead and lift.

3 Excavation for foundation in Soft Rock not requiring 473.90 Cum. 304.35

blasting incl. sorting out and stacking of useful

materials and disposing of the excavated stuff up to

all lead and lift.

4 Providing and laying cement concrete 1:2:4 (1- 110.00 Cum. 3791.11

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in Foundation

5 Pro. & laying controlled cement concrete M-250 and 406.00 Cum. 4836.89

curing complete inclu. the cost of form work and

foundation, footings, base of column and mass

6 Providing and laying Controlled cement concrete M 108.00 Cum. 8022.86

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in Column FOR all Floor.

7 Providing and laying Controlled cement concrete M 149.00 Cum. 6075.15

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in Plinth Beam .

8 Providing and laying Controlled cement concrete M 161.00 Cum. 6440.27

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in Beam for all floor.

9 Providing and laying Controlled cement concrete M 240.00 Cum. 6766.69

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in Slab for any thickness

10 Providing and laying controlled cement concrete 157.50 Cum. 4674.06

M.250 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

work in GRADE Slab

11 Providing and laying Controlled cement concrete M 30.00 Cum. 7308.36

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in Stair Case for all floor.

12 Providing and laying Controlled cement concrete M 40.00 Cum. 6519.98

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in Lintel for all Floor.

1 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

13 Providing and laying Controlled cement concrete M 3.00 Cum. 7277.05

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work for chhajja for all floors.

14 Providing and laying Controlled cement concrete M 3.00 Cum. 13174.44

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work for V & H Fins for all

15 Providing and laying Controlled cement concrete M 16.00 Cum. 6276.14

250 and curing complete including the cost of

formwork and excluding cost of reinforcement for

reinforced concrete work in wall caps/ coping.

16 Providing and laying cement concrete 1:4:8 (1- 331.00 Cum. 2910.82

cement : 4-Sand : 8-Crust stone aggregate 40mm

nominal size) & curing complete excluding cost of

formwork in foundation and plinth.

17 Providing Thermo Mechanical treated bar FE-500D 160700.00 Kg. 77.52

Steel Reinforcement for R.C.C. work including

bending, binding and placing in Position complete

18 Filling available excavated earth (excluding 612.00 Cum. 137.47

rock) in trenches. plinth, sides of foundations

etc. in layers not exceeding 20cm. in depth

consolidating each disposited layer by ramming

19 Filling in foundation and plinth with murrum or 2120.00 Cum. 304.59

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc.

20 Filling in plinth with sand under floors including 194.00 Cum. 489.28

watering ramming, consolidating and dressing

21 Carrying out plinth treatment to post construction / 1336.00 Sqm. 124.35

existing structure by spraying chemical solution for

termite control treatment including labour and

material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Concentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion

with 19 liter give 1 % concentration inclusive of one

litre chemical emulsion application at the rate of

Litre chemical / Sqm of surface is recommended as

22 Brickwork using common burnt Clay building bricks 192.00 Cum. 4310.73

having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand).

23 Brickwork using common burnt Clay building bricks 497.00 Cum. 4618.05

having crushing strength not less than

kg./Sq.Cm. in super structure in Cement Mortar 1:5.

(1- Cement : 5 -fine sand) for all floor.

24 Half brick masonry in common brunt clay 417.00 Sqm. 704.80

building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 ( 1-

Cement : 4 -coarse sand ) in Super structure for all

2 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

25 Providing and laying 25mm polished kota stone slab 1267.00 Sqm. 1019.39

flooring over 20mm (Average) thick base of cement

mortar 1`:6 (1-cement:6-coarse sand) or L.M. 1:1.5

laid over and jointed with grey cement slurry

including rubbing and polishing etc comp.

26 Providing and laying polished kota stone slab 25mm 84.00 Sqm. 1171.39

thick in risers of steps,skirting Dedo and pillars laid

on 10mm thick cement mortar 1:3 (1-Cement :

coarse sand) and jointed with gray cement slury

mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

27 Providing and laying Ceamic GVT tiles 600 x 600mm 37.00 Sqm. 1592.77

10mm thick mett finished in flooring laid on a bed of

20 mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing etc complete.

28 Providing and laying 300 x 600mm ceramic wall tiles 284.00 Sqm. 1618.02

with digital prints with matt/glassy finished with

3mm Horizontal grooves filed with coloured epoxy

grouting 8mm thick in skirting and dedo on a bed of

10mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) colours, shade and design to be approved by

29 Providing and laying 300 x 300mm Anti Skid Ceramic 85.00 Sqm. 1558.43

10mm thick mett finished in flooring laid on a bed of

20 mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with 3mm thick groove epoxy

coating etc complete.

30 Providing and laying 300 x 450mm GVT Vitrified wall 452.00 Sqm. 1583.68

tiles with digital prints with matt/glassy finished with

3mm Horizontal grooves filed with coloured epoxy

grouting 8mm thick in skirting and dedo on a bed of

10mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) colours, shade and design to be approved by

31 Providing and laying white glazed tiles 6mm thick in 6.00 Sqm. 964.47

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement: 3-coarse

sand) finished with flush pointing in white cement.

32 Providing and laying white glazed tiles 6mm thick in 30.00 Sqm. 1091.96

skirting, risers of steps and dedo on a bed of 10mm

thick cement plaster 1:3 (1-cement: 3-coarse sand)

and jointed with white cement slurry)

33 Providing and fixing 18mm thick black granite stone 430.00 Sqm. 3174.43

in Jambs & sills for window over 10mm (Average)

thick base of cement mortar 1:3 (1-cement : 3-

coarse sand) laid over and jointed with grey cement

slurry including rubbing and polishing etc.

34 Providing & laying both side POLISHED KOTAH 96.00 Sqm. 851.43

STONE SHELVES to C.B. with making the grooves in

the walls and fixing the kotah stone finishing the

same with cement mortar 1:2 etc. complete.

3 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

35 Providing and fixing sandwich type platform of 75cm 9.00 Sqm. 8769.83

wide and 75cm high from finished floor level using

25mm thick kotah stone slab as a base and 18mm

thick mirror polished full round edged granite slab

on top , 25mm thick mirror polished /kotah stone

supports of 75cm wide at 45cm C/C or as directed

including providing /Granite side 'Patta' of 30cm

wide on three sides of the platform and S.S. Kitchen

Sink of size 610x460x200mm of Nirali or equilant

brand as per detailed drawing and as directed.

36 Providing and fixing sandwich type platform of 75cm 18.00 Sqm. 8500.16

wide and 75cm high from finished floor level using

25mm thick kotah stone slab as a base and 18mm

thick mirror polished full round edged granite slab

on top, 25mm thick mirror polished /kotah stone

supports of 75cm wide at 45cm C/C or as directed

including providing / Granite side 'Patta' of 30cm

wide on three sides of the platform as per detailed

drawing and as directed.

37 Providing and laying 50mm thick cement concrete 1069.00 Sqm. 347.14

flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded

stone aggregate 20mm nominal size) laid in one

layer and finished with a floating coat of neat

38 Providing and mixing water proofing materials in 390.00 Per Bag 49.25

cement mortar in proportion recommended by the of

manufacturer. Kgs

39 Providing and laying broken China Mosaic Flooring 1018.00 Sqm. 779.69

for Terrace using 12mm to 20mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

crème out upto surface using white cement

including rounding off junctions and extending them

up to 15cm. along the wall, clearing with water and

oxalic acid etc. as directed.

40 Providing and fixing 35 mm thick Flush door shutters 47.00 Sqm. 4616.28

, solid core construction with frame of first class

hardwood with cross board and face veneer or

plywood face panels with both side 1 mm thick

laminated sheet including Indian Teak Wood Frame

12 x7 cm size including Screw, Khili, SS hinges,SS

handle , megnate, stopers etc including Colour(One

coat of primer and two coat of enamel paint) of

Frame and edges of flush door shutter for D3

41 Providing and fixing 35 mm thick Flush door Double 24.00 Sqm. 6844.77

shutters , solid core construction with frame of first

class hardwood with cross board and face veneer or

plywood face panels with both side 1 mm thick

laminated sheet including Indian Teak Wood Frame

12 x7 cm size including Screw, Khili, SS hinges,SS

handle , megnate, stopers etc including Colour(One

coat of primer and two coat of enamel paint) of

Frame and edges of flush door shutter for D2

4 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

42 Providing and fixing FRP of 28mm thick Fibre Glass 76.00 Sqm. 1560.32

shutter with 1.5 to 2.0 mm thick fire retardent grade

FRP skin in depressed panel design having extra

reinforcement on sides & edges & in Gel coat finish.

The core of the shutter is to be filled up with injected

retardent grade polyurethane foam done in situ

alongwith embedded wooden pieces for stiffening &

also taking hinges & fintures. The whole FRP frame

& shutter is to be water proof ,weather proof,

termite proof & resistance to mild acid/alkali. Rates

are to be inclusive of S.S hinges with necessary

screws & alluminium S.S fixtures & fastenings &

fastener sleeve.

43 Providing and fixing colour anodized aluminum 74.00 Sqm. 3804.67

sliding three track window having frame bottom

section size 124mm x 51mm Of Jindal Section

& side and top section size 124 x 41mm of Jindal

section 20837 including shutter frame size 71 x

30mm of Jindal section 20993 with sliding type three

shutters with 5mm thick transparent tinted float

glass and one shutter for mosquito net of wire gauge

including rubber beading PVC virgin, heavy type

handle, bearing, fixture and fastening etc. including

all labour and material etc. complete.

44 Providing and fixing colour anodized aluminum 33.00 Sqm. 4388.59

sliding Two track window of Jindal Series E (30mm)

or equivalent having frame bottom section size

82.8mm x 38mm x 2mm Of Jindal Section 20878 &

side and top section size 82.8 x 38mm x 2mm of

Jindal section 20877 including shutter frame size

x 30mm of Jindal section 21675 with sliding type two

shutters with 5mm thick transparent tinted float

glass with rubber gasket , air lock strip and finishing

joint with transperant silicon sealent , heavy type

handle, bearing, fixture and fastening etc. including

all labour and material etc. complete.

45 Providing & fixing coloured anodized aluminium 17.00 Sqm. 2548.23

sectional louvered ventilator with frame size

63x38.10mm & 1.80mm thick ground glass and

coloured anodized aluminium louvers fixtures and

hold fasting etc. complete.

46 Structural steel work ( Confirming to IS 4923-1997) 21312.00 Kg. 131.82

riveted, bolted or welded in builtup for all type

sections, in framed work, including cutting, hoisting,

fixing in position and applying a priming coat of

approved steel primer all complete as per the

structural designs and directions of Engineer in

charge.Column ( 122 x 61 x 3.6mm )

47 Providing and fixing Colour coated corrugated /semi 395.00 Sqm. 765.35

corrugated Galvalume sheet 0.50 mm thick roofing

fixed with GI "J" or "L" hooks bolts and nets 8mm

dia with bitumen washing filled with white lead

complete excluding cost of purlins, rafters and

48 Providing 15mm thick cement plaster in single coat 2668.00 Sqm. 174.17

on Rough (Similar)side of single or half brick walls

for interior plastering upto floor two level and

finished even and smooth in Cement mortar 1:4 (1-

cement :4-sand) for all floor.

5 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

49 Providing 20mm thick water proof cement plaster 339.00 Sqm. 327.24

for sunk in single coat on brick concrete wall for

interior plastering upto floor two level finished even

and smooth (ii) Cement Mortar 1:3 (1-Cement:3-

sand) and mixing water proofing materials of

approved brand and manufacture in cement mortar

in proportion recommended by the manufacturer for

50 Filling in foundation and plinth with brick Bats. 11.00 Cum. 625.47

Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc.

51 Providing 10mm thick cement plaster in single coat 1660.00 Sqm. 173.11

on ceiling and sofits of stair cases for interior

plastering upto floor two level and finished even and

smooth in Cement mortar 1:3 (1-cement:3-sand) For

52 20mm thick sand faced cement plaster on walls upto 3313.00 Sqm. 323.21

height 10 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

53 Applying Two Coats of Birla or Asian Acrylic Lappy 4328.00 Sqm. 40.59

(Putty) and two coats of primer of approved brand

and manufacture on New Wall Surface to give an

even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth.

54 Wall painting (two coats) with plastic emulsion paint 4328.00 Sqm. 86.37

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

55 Finishing Wall with Weather Proof Exterior Emulsion 3313.00 Sqm. 122.13

Paint on Wall Surface (Two Coats) to give an

required shape even shade after thoroguhly

brushing the surface to remove all dirt, and remains

of loose powdered materials etc. complete

56 Providing and fixing stainless steel railing having 31.00 Rmt. 5807.50

hand rail 850mm height and of 50mm dia and

baluster 32mm dia at 90 cm C/C and 4 horizontal

pipe of 19mm dia at required spacing as per design

and SS having 304 grade and 18 guage pipe

including fastening, hold fast, clumps, coach bolts

57 Providing and fixing stainless steel railing at 850mm 32.00 Rmt. 2090.70

height and of 50mm dia SS pipe with support of

horizontal pipe as 15mm dia at required spacing as

per design and SS having 304 grade and 15 guage

pipe including fastening, hold fast, clumps, coach

bolts for fixing to wall including touching finishing to

wall etc complete.

6 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

58 Providing and fixing frame type CB shutter of 18mm 36.00 Sqm. 5226.75

thick water proof plywood with 1.00mm ISI quality

1.0mm lamination for outside of frame and

cupboard and 0.80mm thick lamination to inside of

cupboard including necessary , hydraulic type S.S.

hinges , fixtures , fastenings of standard quality S.S.

with locking arrangement etc complete as per detail

drawing and as directed by Engineer-in-charge.

59 Providing and fixing cupboard with aluminum pipe 14.00 Sqm. 9292.00

frame of size 50x25mm filled with non-teak wood

and 18mm thick water proof plywood shutter with

nos of SS basket two of size 18" x 20" x 4" , two of

size 18"x 20" x 6" and two of size 18" x 20" x 8" with

necessary intranal arragement front plywood

necessary telescopic channels for drawers and

remaining part of two shutter including 1.00mm

thick laminated sheet for outer face and 0.8mm

sheet for inner face and with 20x20cm teak wood

beading including necessary S.S. hinges and S.S.

fixtures etc complete.

60 Providing and fixing box type cupboard for 8.00 Sqm. 7549.75

wardrobe including frame work with 19mm thick

water proof plywood rear side with 8mm thick

water proof plywood and shutter with 19mm

plywood with necessary drawers of same materials

with 1.00mm thick lamination sheet for outside and

0.80mm thick laminated sheet for inside work.

including cost of all heavy type stainless steel

fittings, sliding channels , locking arrangements for

shutter and drawers including teak wood beading

etc complete as per design and drawings.

61 Providing and fixing 5mm thick glass mirror machine 9.00 Sqm. 2544.19

cut belveled edge mounted on wall with special type

wall touch SS mirror bracket fixing with necessary

62 Providing and fixing wash down water closet 21.00 No. 9408.15

(European type Wall hung) Jaquar Vignette wall

hung size of 615 x 400 x 363mm with Hydraulic seat

cover with inlet & outlet gasket, CI chair brackets

including concealed type Metropole flush valve

40mm concealed body 100mm square plate of

Jaquar or equivalent quality with Health flow set etc.

63 Providing and fixing special type wash basin on 14.00 No. 6742.76

counter top of size 610x460mm of CERA or

equivalent quality including pillar tap, Stop cock

64 Providing erecting and fixing Tripal layer ISI water 10000.00 Liter. 12.12

tank of required capacity each with all necessary

fittings , tank cover and as required connection etc.

complete on terrace

65 Providing and fixing 15mm dia Jaguar or equivalent 10.00 No. 801.94

regular body stop cock etc complete.

66 Providing and fixing Heavy type lang body bib tap of 94.00 No. 1103.93

Jaguar or Equivalent quality of 15mm dia etc

67 Providing and fixing heavy type Push type bib tap of 11.00 No. 1277.65

Jaguar or equivalent quality of 15mm dia etc.

7 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

68 Providing and fixing concealed center point to wall 250.00 Rmt. 447.72

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of 40mm dia. nominal bore tube

fittings and clamps including making good the wall,

ceiling and floor etc. complete.

69 Providing and fixing Stainless steel Heavy Type 21.00 No. 1150.39

Brass Towel Rack 600mm considering & 12mm dia

rod and one 20mm dia rod including 3 to 4 pegs

including C.P. Brass Brackets etc complete

70 Providing and fixing Stainless steel Heavy Type 3.00 No. 348.45

Napkin Ring etc complete

71 Providing and fixing concealed center point to wall 54.00 Rmt. 170.35

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of 15mm dia. nominal bore tube

fittings and clamps including making good the wall,

ceiling and floor etc. complete.

72 Providing laying and jointing in true line and level 114.00 Rmt. 72.64

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

73 Providing laying and jointing in true line and level 135.00 Rmt. 91.83

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

74 Providing laying and jointing in true line and level 186.00 Rmt. 148.11

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help

of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

75 Providing and fixing to wall, ceiling and floor 100.00 Rmt. 794.18

galvanized mild steel tubes (Medium grade) of the

50mm nominal bore, tube fittings and clamps

including making good the wall, ceiling and floor.

76 Providing and fixing PVC pipe of 6 Kg / F / Sq.M. 246.90 Rmt. 356.53

Water pressure polythene pipe of 90mm inside dia.

high density complete including fixing by clamps to

wall including making good the wall ceiling and floor

8 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

77 Providing, laying and jointing in true line and level 539.00 Rmt. 897.78

110mm dia U.P.V.C. SWR Type B-Pipe conforming

to IS 13592-1992 with one end plain and other end

socketed with rubbering & fitting conforming to IS :

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160mm diameter x 210mm

length x 196mm high at every 2000mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes

etc. including testing of pies and joints and jointed

with adhesive solvent cement including cost of all

78 Providing, laying and jointing in true line and level 130.00 Rmt. 834.38

160mm dia U.P.V.C. SWR Type B-Pipe conforming

to IS 13592-1992 with one end plain and other end

socketed with rubbering & fitting conforming to IS :

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160mm diameter x 210mm

length x 196mm high at every 2000mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes

etc. including testing of pies and joints and jointed

with adhesive solvent cement including cost of all

79 Providing and fixing 25mm dia Gun metal check or 18.00 No. 420.63

non-return fully way wheel valve.

80 Providing and fixing 40mm dia Gun metal check or 13.00 No. 663.42

non-return fully way wheel valve.

81 Providing and fixing 50mm dia Gun metal check or 2.00 No. 1878.60

non-return fully way wheel valve.

82 Supplying and fixing standard quality (Kranti or 1.00 No. 7105.35

equivalent) 50mm dia water meter with flange, nut

bolt etc. complete.

83 Providing and fixing PVC SWR Nahni Trap IS 14735 66.00 No. 588.26

for drain with jali of the 75mm nominal diameter of

self cleansing design with C.I. Scrwed down or

hinged grating including the cost of cutting and

making good the walls.

84 Providing and fixing S.W. gully trap with C.I. grating 8.00 No. 1292.19

brick masonry chamber and water tight C.I. cover

with frame of 300mm x 300mm size (inside) with

standard weight wtih Square mouth traps size of

100mm x 100mm size P type

85 Constructing brick masonry chamber for 45.00 No. 3417.70

underground C.I. Inspection chamber and bends

with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete with Inside dimensions

455mmx 610mm and required depth for single pipe

9 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

86 Supplying and fixing reinforced concrete heavy duty 219.00 Rmt. 659.99

nonpressure pipes with collars for culverts carrying

heavy traffic as per IS 458-1991 specifications

including setting the pipes in C.M. 1:2 watering and

laying (to level or slopes) of class NP3 of Internal

87 Constructing brick masonry chamber for 18.00 Sqm. 2596.71

underground Inspection chamber and bends with

bricks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 650mm deep for

single pipe line.

88 Providing and fixing pre-cast Rubber Dye / steel Dye 424.00 Sqm. 707.54

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand

layer for levelling and filling the joint with sand in

proper line and level as per guidlines of IRC : SP 63-

2018 etc. Complete.

89 Providing and fixing Pre-Cast Concrete Kerb Stone 80.00 Rmt. 410.41

of gray cement based concrete block 30cm. length,

30cm. height and 15cm. thick of M-250 Grade

concrete as per approved design and including

excavation for fixing in proper line and level, filling

the joint with C.M. 1:3 (1-Cement : 3-Fine Sand) etc.

90 Providing and constructing and junction chamber of 20.00 No. 2588.63

size 0.45x0.45x0.45 mt. including necessary

excavating 23 Cum. brickwall, beding CC 1:2:4, top

RCC slab, 15mm thick plaster and connection of rain

water pipes as per detail drawings and as directed

by engineer – in – charge.

91 Providing filter chamber of brick work in C.M. 1:5 of 1.00 No. 13948.10

size 2.06mt X 1.21 mt x 1.20mt and excavation

dimension of 2.66x1.81x1.35mt including C.C. 1:2:4

bed concrete of 0.15mt thick including brick work in

C.M. 1:5 for 23cm thick wall including 15mm thick

cement plaster inside and out side and 10 cm thick

RCC 1:2:4 top over with CRS steel and manhole

cover with frame of minimum weight of 35 Kg and

filling filter material Kapchi and sand as per detailed

92 Providing recharging pit of size 1.20mt dia and 1.00 No. 42356.37

1.20mt Depth of water logging with excavation filling

the pir with brick bats & sand in layerincluding

macking 300mm dia bore dpeth of 4.5mt & filling

bricks bats as per drawing as directed.

93 Providing and fixing Sign board on Alluminium 9.00 Sqm. 3467.33

Composite Pannel 4 mm thick and letter with sticker

sheet including fixing etc complete.

10 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

94 Providing and fixing special type clamping system 30.00 No. 213.11

made out from C patti, Z patti, L Clamp , U clamp

with Nut/ Bolt and washer as suitable arrangement

for water supply and plumbing system like Drainage

Line , Rain Water line and supply line for Hot and

Cold water etc line fitting from GF to 2nd Floor

required as per site condition for fixing etc

complete. (A) 15 to 40mm dia Pipe

95 Providing and fixing special type clamping system 30.00 No. 242.40

made out from C patti, Z patti, L Clamp , U clamp

with Nut/ Bolt and washer as suitable arrangement

for water supply and plumbing system like Drainage

Line , Rain Water line and supply line for Hot and

Cold water etc line fitting from GF to 2nd Floor

required as per site condition for fixing etc

complete. (B) 50 to 65mm dia pipe

96 Providing and fixing special type clamping system 50.00 No. 275.73

made out from C patti, Z patti, L Clamp , U clamp

with Nut/ Bolt and washer as suitable arrangement

for water supply and plumbing system like Drainage

Line , Rain Water line and supply line for Hot and

Cold water etc line fitting from GF to 2nd Floor

required as per site condition for fixing etc

complete. (C) 75 to 110mm dia pipe

97 Drilling of 215mm dia bore hole in over burden 200.00 Rmt. 551.46

strata (alternative layer of lime stone and yellow

stridly formation) by DTH regi. up to required depth

including fixing of 175/180 dia ERW/PVC pipe if

required drilling by 165mm dia bore hole in hard

rock strata DTH drilling method up to all depth.

98 Earthwork for embankment including breaking 1098.00 Cum. 182.14

clods, dressing with all lead and lift and including

watering rolling and consolidation of subgrade in

layers at O.M.C. to required dry density including

filling the depression which occur during the

process using power roller 8T to 10T.(E) From

Borrow area within all lead.

99 Providing and laying compacted W.B.M. 150mm 128.00 Cum. 1246.34

thick of grade-II in two layers each of 75mm thick of

machine crushed BT metal of size 40mm to 63mm

with using 13% stone screenings of 13.2mm size and

7% stone dust as filler including spreading watering

and consolidation by vibratory roller etc. comp. in

100 Providing and casting in situ controlled trimix 171.00 Cum. 7070.00

cement concrete M-250 for average 200mm thick

road work laid as directed including adding super

platisizer admixture of IS make and providing and

laying M.S. side rail of road thickness with

necessary nut bolts plates fixing as per width

applying plate vibrator (electric or diesel) on

channel compressor with vacuum dewatering

system by using all necessary equipments and

materials and machinery such as running screed

vibrator on prelaid M.S. channel for leveling

,Vacume pump, floating and power towelling etc

with filling the joints with bitumen as directed etc

11 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

101 Painting lines, deashes, arrows, letters etc on 44.00 Sqm. 59.17

roads, Air fields and like in two coats with road

marking paint, brushing including cleaning the

surface of all dirt, dust and other foreign matter for

102 Distance Informatory/ Destubatuib sign :Providing 2.00 No. 18254.19

and fixing sing boards made out of 2mm aluminium

sheet; size 180 x 120cms. rectangle as as per the

design of IRC-67-1977 pre treated with phospheting

process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy

paint; reflectorised with retro refiective sheeting as

per latest M.O.S.T. Specifications; Letters and

numerals should be as per IRC-30-1968, 3.1m long

(2 nos) stand post and frame fabricated from

suitable size iron angle of 50 x 50 x 5mm 75 x 75 x

6mm as required; painted with best quality epoxy

coatings in black and white bends. the details of

symbol or inscription / numerals for each board shall

be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x

x 60cms. for each leg. including excavation curing

etc. complete under the supervision of engineer in

charge.(B)High Intensity Grade.

103 Providing and fixing cattle trap of required size and 12.00 Sqm. 9072.83

design by providing GI pipes 50mm dia at 10 cm c/c

including providing “c" chanels 100x50x6x6mm size

including necessary excavation 10 CM thick CC

1:2:4 for foundation complete CC wall of CC 1:3:6

with cement plaster 15mm thick in CM 1:4 etc.

complete as directed by Engineer – in – Charge.

104 Providing and fixing RBT fencing with punched tape 293.00 Rmt. 365.62

concertina upto 3 m height of wall with angle iron ‘Y’

shaped 40 x 40 x 5mm placed 2.4 m or 3.00 m apart

and with 6 horizontal R.B.T. reinforced barbed

wire,stud tied with G.I. staples and G.I. clips to

retain horizontal, including necessary bolts or G.I.

barbed wire tied to angle iron, all complete as per

direction of Engineer-in-charge, with reinforced

barbed tape(R.B.T.) / Spring core (2.5mm thick)

wire of high tensile strength of 165 kg/ sq.mm with

tape (0.52 mm thick) and weight 43.478 gm/ metre.

(Cement concrete for fixing angle will be paid under

105 Preparing the existing land /soil and removal of 2221.00 Sqm. 24.74

unserviceable soil, stone ,unwanted vegetation and

disposing of the same as directed.

106 Preparing the land by filling fertile/ selected garden 2221.00 Sqm. 77.77

soil, including leveling & fine dressing and mixing

manure/bio tech fertilizer/ fertilizer and termite

treatment as per requirement.

107 Plantation of carpet type lawn including labour 2221.00 Sqm. 57.57

materials , watering and growing etc. as per

instruction of EIC.

108 Plantation of flower bed with selected flower plant 223.00 Sqm. 232.30

including planting the same at 45 CM apart and

growing the same including as per instruction of

109 Planting of hedge with selected hedge plant like 387.00 Rmt. 154.53

Golden , Duranta, Red Bhaji or selected plant @

CM apart as per instruction of EIC.

12 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

110 Planting of selected shrubb trees like Ticoma, 200.00 No. 64.64

Nerium or other selected plant including preparing

pit of size 30 x 30 x 30 CM and filing with selected

garden soil including manure, fertilizer and as per

instruction of EIC.

111 Providing Three plants having minimum 2.00 mt. 50.00 No. 64.64

hight and healthy growth of various kinds as like

peltroform, Gulmahore, Karanj, Ambla, Rain tree,

Sapparni, Cherry, Cryjeliya, Spethodiya, Paras

Pipala, Garmali, Neem, Borsalli, Kadam, Buch,

Chanpo, Asopalav and as suggested etc.

112 Providing tree plants having minimum 2.00 mt height 20.00 No. 1742.25

and health growth of bottle palm tree, Cycus palm

and other palm tree planting including 30 x 30 x

Cm. pit filling with selected garden soil including

manure, fertilizer as per instruction of EIC.

113 Providing and fixing Precast Garden three seater 20.00 No. 3484.50

bench size of 4.50 Feet with back rest as per

Design drawing including fixing on site as EIC

114 Constructing hexagonal Gazebo by using necessary 3.00 No. 225836.00

excavation for foundation of MS. Structure framing

brick work , plaster work & weather proof paint and

1mm thick Galvalume Sheet roofing as per required

shape, Kotah Stone flooring , kotah stone slab type

55cm wide seating arrangement with necessary

support of 25mm thick kotah stone vertical support

and in centre 120cm dia kotah stone table with four

nos vertical support with finished edge and in

periphery 0.60mt height wall with required pattern

with including plaster and exterior paint etc

complete for all required material , labour etc work

carried out as per drawing & instruction by EIC.

115 Supply & Installing of ABC Type - 6 Kg, Capacity 20.00 No. 2846.18

Fire Extinguisher as per IS -2171 ISI - mark , with

necessary Fittings etc. complete.

116 Supply & Installing of Gas Co2 Type–4.5 Kg.. 20.00 No. 6736.70

Capacity Fire Extinguisher as per IS And ISI - mark

, with necessary Fittings etc. complete.

Total of Civil Items (A) Rs.

(B) Electrical Work

117 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 313.00 Pt. 410.06

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed.(j) in existing pipe erected concealed in

wall/ceiling complete Cat III

13 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

118 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 79.00 Pt. 556.51

sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity

of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed. (j) in existing

pipe erected concealed in wall/ceiling complete cat-III

119 Point wiring for Individual Plug with & earth wire of 1.5 3.00 Pt. 425.21

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (j) in existing pipe erected

concealed in wall/ceiling complete cat-III

120 [III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. 43.00 Pt. 702.96

Wire with 2.5 sq.mm ( green) earthing wire from mcb d b

board. (j) in existing pipe erected concealed in

wall/ceiling complete Cat. III

121 Point wiring for on board Looped Plug with 6A Modular 98.00 Pt. 257.55

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules

erected on / in wall / ceiling with following type

accessories cat-III

122 Point wiring for Two Way Controlled Light Point with 2-1.5 4.00 Pt. 514.09

sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling

rose or H.D.Connector as directed. (j) in existing pipe

erected concealed in wall/ceiling complete cat-III

123 Providing following type of Modular Type Accessories 80.00 Ea. 25.25

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as

per site situation directed by Engineer In charge (7) Blank

Plate Single cat-III

124 Providing and erecting ISI mark Medium class RIGID PVC 3204.00 Mtr. 24.24

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed (a)

126 Providing and erecting Mains with 1.1 KV grade FRLS 55.00 Mtr. 46.46

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (E) in existing

pipe (a) 2 wire 1.5 sq. mm

14 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

127 (E) in existing pipe (b) 2 wire 2.5 sq. mm 1888.00 Mtr. 62.62

128 providing and erecting Mains with 1.1 KV grade FRLS PVC 200.00 Mtr. 86.86

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (E) in existing pipe (a) 2 wire 4 sq. mm

129 (E) in existing pipe (b) 2 wire 6 sq. mm 15.00 Mtr. 121.20

130 (E) in existing pipe (h) 4 wire 6 sq. mm 296.00 Mtr. 240.38

131 providing and erecting Mains with ISI marked, 1.5KV 16.00 Mtr. 12.12

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (a) One wire

132 (e) One wire 6.00 sq. mm 108.00 Mtr. 56.56

133 (h) One wire 25.00 sq. mm 14.00 Mtr. 236.34

134 (i) One wire 35.00 sq. mm 8.00 Mtr. 300.98

135 Supplying and erecting Flexible PVC insulated multi 183.00 Mtr. 46.46

strand multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.(e) 1.50 Sq.mm

core round PVC sheathed

136 Providing & erecting Switch board for Computer or 89.00 Ea 1133.22

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front plate, modules

erected with necessary connections as directed 1 no.

6A/16A universal plug-switch combined. 3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories cat-III

137 Supplying and erecting LED indoor fittings with LEDs of 226.00 Ea 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.9, THD < 15%,CCT 3000 K to

6500K,Luminaire efficacy> 85 lumens/watt ,LED driver

efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A)

Tube Light with integral driver (iv) 22 Watts, Surge -

2KV,IP-20, conventional 4 feet cat-III

138 Supplying and erecting LED street light / Flood light 24.00 Ea 5976.17

fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K

to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage

protection. (iii) 90 watts cat-III

15 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

139 (B) Flood Light (IP-65), Surge protection -4KV integral 3.00 Ea 7266.95

and ,Light must have 440VAC line supply with over-

voltage protection. (iv) 100 to 120 watts cat-III

140 (B) Flood Light (IP-65), Surge protection -4KV integral 10.00 Ea 9647.52

and ,Light must have 440VAC line supply with over-

voltage protection. (vi) 200 watts cat-III

141 (C) Post Top Lantern LED fitting comprises of finish cast 2.00 Ea 4819.72

aluminum spigot and spun aluminum canopy fixed with

opal polycarbonate, pipe arrangement for vertical

mounting driver and accessories wired upto terminal

block.IP 65 (ii)40W Cat iii

142 Pproviding and erecting Approved make Four pole 4.00 Ea 6173.12

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up to

63 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. ICS=100% of ICU only Cat

143 Pproviding and erecting Approved make Four pole 4.00 Ea 6790.43

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating up to

63 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. ICS=100% of ICU only Cat

III Note:-1 Add Rs. 10% extra for housing/Encloser of

MCCB for Item No 3-4-1 to 3-4-12 (The Enclosures should

be used of same company of MCCBs to be used)

144 Providing and erecting Approved make Earth fault Relay 2.00 Ea 4687.41

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete

erected in existing M.S.housing.. (1) 63 A -100 A , CT

145 Supplying & erecting approved make Four Pole 415V 1.00 Ea 4785.38

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

(B)63 A Cat-III

147 Supplying and erecting triple pole & neutral 440V / 500V 1.00 Rn. Mtr 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence

of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with

necessary connections. (A) Suitable for 100 Amp.

148 providing and erecting Miniature circuit breaker single 39.00 Ea 270.68

pole 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat iii

149 providing and erecting Miniature circuit breaker single 142.00 Ea 112.11

pole 10 A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark cat-

150 Providing & erecting 240 V MCB double pole switch for 2.00 Ea 278.76

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity (A) 32 Amp. cat-III

151 (B) 40 Amp. cat-III 9.00 Ea 295.93

16 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

152 Providing & erecting 415V MCB Four Pole Switch for 25.00 Ea 638.32

Lighting Load (B curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following

capacity (b) 40 Amp. Cat iii

153 Providing & erecting 415 V MCB Four Pole for Motor & 4.00 Ea 595.90

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (a) 32 Amp. cat-III

154 Sheets steel powder coated enclosure suitable for 26.00 Ea 176.75

incorporating One/Two nos. MCB

155 Providing and erecting Sheet Steel powder coated MCB 4.00 Ea 629.23

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43)(i)4 way

156 (A) single phase incoming and horizontal single phase 1.00 Ea 1680.64

outgoing (b) sheet steel double door (IP-43)(v) 16 way

157 (B) three phase incoming and single phase horizontal type 5.00 Ea 2339.16

outgoing Per phase isolation type (PPI) (b) sheet steel

double door (i)4 way

158 (B) three phase incoming and single phase horizontal type 4.00 Ea 2913.85

outgoing Per phase isolation type (PPI) (b) sheet steel

double door (ii)6 way

159 providing and erecting Approved make RCCBs 24.00 Ea 1969.50

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component.

for following Max. rating erected as directed (i)

Amps.DP Cat III

160 (ii) 40Amps. DP Cat-III 28.00 Ea 2235.13

161 Providing and erecting metallic vitrified danger notice 2.00 Ea 69.69

board as per language suggested by engineer incharge

for MEDIUM VOLTAGE installation to be erected as per IS-

162 Providing and erecting required size Copper strip for 8.00 Kg 794.87

earthing of H.T. OCB / ACB/ Transformer, LT panel board,

Motors etc. using copper clamp.

163 Providing and erecting Annealed bare Copper wire 8 to 12 6.00 Kg 794.87

17 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

164 Supplying & erecting earth pit of minimum bore 7.00 Ea 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with

high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must

be submitted by Agency. (a) For Electrical Installation up

to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

165 Providing & erecting weather proof, dust & vermin proof, 2.50 Sq. Mtr 14902.55

floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per

approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction

of engineer-in-charge with erection of supplied switch

gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets,

rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket, heavy duty

end terminal connection, danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes

the cost of switchgears, bus bars, inter connecting mains

& Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams) The

panel shall be supplied with following approved

manufacturers with following size. (B) The standard

companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm

166 Providing , erecting , fabricating the M.S. structure as per 190.00 Kg 77.77

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections

complete with cutting, welding, grinding & finishing duly

painted with one coat of red oxide with erection on site as

per direction of engineer in charge with necessary

grouting, cementing, plastering & finishing complete.

167 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 214.00 Mtr. 126.25

cable Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of

following size of cables. (C) 2 core 10 Sq. mm

18 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

168 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 196.00 Mtr. 220.18

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (B) 3 1/2 core 35 Sq. mm (

16 Sq. mm 1/2 core)

170 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 474.00 Mtr. 126.25

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (B) 4 core 6 Sq.

171 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 134.00 Mtr. 153.52

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (A) 4 core 16 Sq. mm

172 Making trench in soft soil of suitable width of 90 cm deep 631.00 Mtr. 55.55

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

173 Supplying following size of Light duty “A” Class G.I . Pipe 42.00 Mtr. 300.98

& erecting as directed by Engineer-in-charge. (B) 50 mm

174 Providing & laying approved make Double walled 907.00 Mtr. 62.62

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable

(A)50 mm outer dia

175 Providing and, fixing heavy duty flange type brass cable 7.00 Ea 38.38

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (B) 2 to 4 core 6 Sq. mm

176 (C) 2 to 4 core 10 Sq. mm 3.00 Ea 38.38

177 (D) 2 to 4 core 16 Sq. mm 2.00 Ea 47.47

178 Providing and, fixing heavy duty flange type brass double 9.00 Ea 75.75

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.(B) 3 & 1/2

core 35/50 Sq. mm

179 Solder less crimping type Aluminium lugs conforming to 17.00 Ea 15.15

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm.

181 Solder less crimping type Copper lugs conforming to IS 8.00 Ea 8.08

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm

182 Providing & erecting Approved make Power Saving 50 79.00 Ea 1948.29

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy &

cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge))

183 Supplying and erecting 19 / 20 mm. nominal bore Medium 40.00 Mtr. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

184 Supplying & erecting fan hook box of 10 mm M.S. round 79.00 Ea 108.07

bar bounded to the RCC bars up to 50mm length each

side and pierced through a 16 Gauge M.S. box / Heavy

Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

19 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

185 Providing 2.5mm.thick laminated acrylic sheet to cover 79.00 Ea 18.18

the fan hook or Fan box.

186 Supplying & erecting approved make low noise 29.00 Ea 1703.87

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame. 200mm with 1350RPM

187 Supply of approved make FRP Pole having following 12.00 Ea 14059.20

specifications: FRP Light Pole made by CNC filament

winding machine using thermoset resin polyester/epoxy

resin system) having minimum 62% glass content. The

pole should be in one piece and tapered round in shape,

having smooth finish and should be totally free from

corrosion as well as non conductive & shock proof Pole

should be provided with FRP Anchor Base and it should

be heavy duty, or MS Material duly painted with Epoxy

paint.Pole should be flame retardant as per IS 6746. Resin

used shall be UV resistance and pigmented. A highly

weather resistant polyurethane coating shall be applied

to the pole after applying suitable primer system that

ensures proper adhesion of the paint. Minimum coating

thickness shall be 80 to 100 micron. Deflection of the pole

shall not exceed more than 10% of the length of pole for

the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some

interchangeability features of poles as per standard ANSI

C 136.20 latest version or ASTM D 4923/01 including

cable termination box with necessary accessories . The

size of pole and type of installation with foundation as per

manufacturer details and site requirement are as below

.(1) Suitable for base plate mounting single arm Bracket.

[H] Overall length of 6 Mtr. Average Thickness: 7.5mm

Top/ Bottom OD Dia A/F 89mm ± 2mm approx. approx.

Weight of Pole 32 kg approx. (Without Base) Anchor Base

(Size 300X300 & 18mm Th.)

188 (2) Suitable for base plate mounting Double arm Bracket. 6.00 Ea 14894.47

[C] Overall length of 6 Mtr. Average Thickness: 8mm.

Top/ Bottom OD Dia A/F 114/174 mm ± 2mm approx.

approx. Weight of Pole 38 kg approx. (Without Base)

Anchor Base (Size 300X300 & 18mm th.)

189 Providing FRP arm bracket of having 2 sets of suitable 12.00 Ea 2551.26

SS304 hardware for fixing the brackets & spread of

Mtr(Suitable for 89 to 114 mm pole top dia) (A) Single arm

190 (B) Double arm bracket 6.00 Ea 3933.95

191 Supplying & erecting approved make SMC press 5.00 Ea 476.72

moulded composite FRP. loop-in, loop-out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors

as per requirement having locking arrangements with

mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth bolt of

following size of box.(C)150mm x 125mm x 100mm [deep]

192 Supplying & erecting approved make Digital time switch 1.00 Ea 3168.37

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed.

20 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

193 Supplying & erecting power contactor ,AC3 duty for time 1.00 Ea 2782.55

switch complete erected as per direction Cat III (D)

pole 440V 40 Amp.

194 Providing & erecting water cooler having storage 4.00 Ea 55893.40

capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @

an ambient temp of 45˚ C. The outlet temp. of the water

should drop by 15˚C within a hour, The water cooler

should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete with

necessary inlet & outlet connection. The body of water

cooler will be made from Stainless Steel.

195 Supplying & erecting 5 stage single reverse osmosis 4.00 Ea 29187.99

water purification system with M.S. powder coated frame,

prefilter housing with 'O' ring presediment filter GAC

filter, carbon filter suitable buster DC pump capacity

psi, mention with 40 psi inline type post carbon filter auto

low & high pressure switches with following size of

storage tank & LPH capacity & erected as directed [C]

Ltr / Hr with 150 psi 2 nos booster pump

196 Supplying and erecting horizontal / vertical mounting type 21.00 Ea 11455.42

storage water heater with copper container housed in

M.S./S.S./ABS body insulated with glass wool/puff

complete with heating elements,adjustable thermostats

300C to 850C, indicating lamp, safety valve, fusible plug,

etc.complete erected with coach bolts, nuts. washers &

cementation (C)25 Ltr. with 2 KW. heating element

Premium Category (Racold,A.o.Smith,Venus)

197 Providing & Erecting new water level Sensor for 50 Ltr. 4.00 Ea 864.56

198 Supplying and erecting approved make panel mounting 2.00 Ea 1275.63

type Digital Voltmeter having 3 digits LED display, 0 to

750 AC Volts range erected on existing panel board with

all connection, wiring etc .with manufacturers calibration

199 Supplying and erecting approved make panel mounting 2.00 Ea 1558.43

type Digital Ammeter having 3 digits LED display,

external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc .with

manufacturers calibration certificate.

200 Supplying and erecting Ammeter / Voltmeter selector 4.00 Ea 317.14

switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections.

201 Providing & erecting L.T. Current Transformer with bar 6.00 Ea 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

202 Supplying and erecting approved make suitable panel 6.00 Ea 43.43

indicator LED type lamp, lens cover, complete erected

with necessary connections.

203 Providing & erecting open well horizontal mono block 2.00 Ea 18746.61

pump set with cast iron body, complete for three phase

submersible motor having[D] For 5 HP 3 phase open well

horizontal mono block pump set suitable for 1350 LPM to

310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia

delivery pipe Cat-II

21 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

204 Supplying & erecting approved make motor control 3.00 Ea 7722.46

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of

suitable size of ON- OFF isolator (AC - 3/23duty) main

fuses, single phasing preventer, indicating lamps for R- Y -

B phases, overload relay, Automatic water level

controller, Ammeter, Voltmeter each with two way

selector switch incoming, wires duly socket crimped,

main contactor & overload relay, start - stop push

buttons, to be erected on angle iron frame grouted on

wall as directed. The isolator, overload relay & contactors

will be of L & T, Siemens or BCH make only. (A) DOL up to

205 S.I.T.C. submersible pump set suitable for bore of 100 1.00 Ea 22374.53

mm. dia. or more having three phase motor capacity not

more than 5 H.P. with following capacity Lifting and

Lowering taken extra. (B) (16 stage) 140 to 180 LPM

discharge at 96 to 69 mtrs. head respectively suitable for

50mm dia. delivery pipe Cat III

206 Lowering of submersible motor pump set at the depth of 1.00 Per Job 2568.43

following ,complete with required. Nos. and size of casing

pipes erected by means of proper chain pulley block &

pipe wrenches after checking of threads of each pipe with

coupling to take the load of the pump set and pipe

assembly filled up with water (B) Above 60 mtrs. and Up

207 Providing and erecting ISI marked PVC insulated PVC 160.00 Mtr. 146.45

Sheathed Flat flexible Submersible copper cable

approved make of following Size.(C) 3 Core x 4 Sq. mm

208 Providing Water proof straight Joint in PVC insulated flat 3.00 Ea 189.88

flexible copper cable by using insulating material, water

proofing material, & making the joint complete. (A) Up to

209 Supplying of following size of HEAVY UPVC column pipe 96.00 Rn. Mtr 359.56

with coupler and wire lock [B] 50 mm dia

210 Supply of following size of TOP & BOTTOM accessories 1.00 Per Set 1489.75

i.e. Adaptor set (CI) long, pump guard set, starter pipe

Rubber ring for submersible pump & UPVC column pipe

as directed by Engineer - in - charge with necessary

plumbing as desired. [D] 50 mm dia

211 Supplying and erecting, commissioning and testing of 1.00 Ea 675844.53

Diesel Generating set confirming to IS: 4722:1968 &

BS:5514 having continuous rating, 3 phase, 415 volts,

cycles A.C. supply comprising of a totally enclosed

air/water cooled diesel engine with multi-cylinders

developing suitable BHP not less than following capacity

at 1500 RPM with 10% overload for one hour in 24 hours

with standard accessories like fly wheel, lubricating oil

cooler, "A" class governor, heavy duty fuel wheel and

lubricating oil filter, oil bath air filler, lubricating oil

pressure gauge, end exhaust manifold, standard set of

tools with adjustable spanners, screw drivers, cylinder

head to cover, joint cylinder head to exhaust, element

lube oil filter, 12 / 24 volts electric starting equipment

complete with standard heavy duty battery, dynamo, cut-

outs, ammeter, necessary wiring, pressure gauge, starter

etc and heavy duty Residential type exhaust silencer

(With DEF System) and vertical hot air duct both

22 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

logged with asbestos rope, save oil trays, exhaust piping

of required length, standard wall/floor mounted fuel with

level indicator and piping and drip proof alternator, self

excited, self regulated, screen protected, with excitation

system, capable of delivering the rated system output at

415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at

RPM, conforming to IS-4722- 1968 with voltage regulation

+/- 5% of rated voltage from no load to full load. Both the

engine and alternator fitted on a common fabricated steel

base plate with antivibration mounting engine and

alternator both connected to each other by flexible flange

coupling and with floor/wall mounted control panel box

comprising of voltmeter ammeter, selector switches,

ACB / MCCB / MCB of adequate capacity, indicator lamps

duly wired with HRC fuses. The alternator & control panel

shall be connected with provided suitable capacity

armoured cable and complete with Acoustic enclosure

(canopy) made out of 16 SWG CRCA Sheet, sound

absorbing material Rockwool of 64 density & 100 mm

conforming to IS:8183 / PU Foam of 40 Density - at least

40 mm. The resin bonded rockwool covered from inside

the canopy by perforated sheet with 3/4 mm holes, sound

level not more than 75 dB at a distance of 1 mtr, as per

PVCT norms.DG set should have in built fuel tank capacity

of minimum 8 hrs of continous running capacity on full

load . Erection, commissioning and satisfactory testing as

per requirement with first filling of fuel (minimum up to the

80% of fuel tank capacity), oil, etc. with guarantee /

Warrantee of complete system for Two years. & with

obtaining all necessary certificate from Electrical

Inspector. The Capacity and Ratings of DG sets are as

below. (As per new CPCB4+ Emission norms Engine With

- Turbo Charger, EGR (Exhaust Gas Recirculation), CRS

(Common Rail Fuel System), DOC (Diesel Oxidation

Catalyst), SCR (Selective Catalytic Reduction), Integrated

wiring harness connected to ECU .) (I) Continuous Rating

of 62.5 KVA ,BHP not less than 76 BHP

212 AMF panel Providing & erecting approved make AMF 1.00 Ea 97320.57

control panel suitable for following size of 3 phase,

V., 50 cycles, A.C. diesel generating set complete of

scope as detailed below: 1) Power module: A pair of

electromechanically interlocked contactors (for mains &

generator) Overload relay for generator contactor

Neutral contactor for mains and generator Power socket

for connections.2) Control and metering module: Line

voltage monitor. Generator voltage monitor Ammeter

items attempt start facility. Air circuit

breakers/MCB/MCCB of suitable rating for auto/manual

operation. Auto/manual switch. Emergency stop push

buttons. Manual start push button. frequency meter.

Engine hour meter. Two earthing studs.3) Protection

module: The engine shutdown in the unlikely event of Low

lube oil pressure High cylinder head temperature. V belt

failure. 4) Indicators with alarm Load on generator.5)

Indicators Load on mains Engine fails to start .

Emergency stop battery charger. The AMF Panel of

following capacity (A) AMF Control Panel for 50/62.5 KVA

23 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

213 Supply, Installation, Testing & Commissioning of following 40.00 Per KW 42156.39

size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material :

Anodized Aluminum alloy Frame With Twin Wall Profile,

Front Cover : High Transmission Low-Iron Tempered

Glass (AR Coated), High efficency and positive power

tolerance Pmax: 0/+5, Module Efficiency should be

approx. 19.5%-22%, Normal operating temperature 45'C,

Junction Box with Waterproof IP67 & MC4 Compatible and

Enclosed with Bypass diodes, 100% Electroluminescence

test to ensure error free Modules, Thep. temp. co-efficient

of the PV module shall equal or better than -0.45%/degree

C. Solar PV modules of minimum fill factor 75% to be

used. Unit Production:- More than 4.5 Unit /kw /day

(Actual)(1Year Avg) With 10 year Product warranty and

year Linear Power Warranty includes all mechanical and

electrical parameters of the Solar panel. Modules must be

complied to the DCR(Domestic content requirements).

The Ration of AC to DC is 5:6 for the Installation capacity

which are given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V

Max efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz,

Operating Altitude (m) ≤4000, O/p Power Factor: ~1, O/P

THDi: <3%, Operating Tempreture Range: -25~60°C,

Integrated protection of Inverter are Anti-islanding

Protection, Input Reverse Polarity Protection, Insulation

Resistor Detection, Ground fault protection, Residual

Current Monitoring Unit, Output Over Current Protection,

Output Short Circuit Protection, Output Over Voltage

Protection, PV array string fault Protection. Protection

Degree: IP65, User Interface LCD & APP, Datalogger &

Communication: GPRS / Wi-Fi.Integrated, Input Reverse

Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit

Integrated, Output Over Current Protection Integrated,

Output Short Circuit Protection Integrated, Output Over

Voltage Protection Integrated, Protection Degree: IP65,

User Interface LCD & APP,Datalogger & Communication:

GPRS / Wi-Fi, Module Mounting Structure:

The mounting (Rectangular pipe / square pipe / circular

pipe) with requisite cross bars, nuts and bolts, etc. shall

be Hot deep galvanized with minimum 80micron coating.

The Rectangular / square /circular hollow pipe section

used for the structure should have a minimum thickness

of 2.0 mm. other than above, the material thickness

should be minimum 2.5 mm. A certificate of a structural

engineer certifying the strength and stability of the

mounting structure to withstand the weight and wind

speed of 150 km/hour throughout the life span of 25 years

of the system, shall be submitted by the vendors. Hot

Dipped Galvanized steel coils. suitable arrangement for

base plate for foundation , solar panel mounting, the

structure should be suitable for carry the load of solar

panel,wiring, sprinkler system etc. with necessary

foundation work/wall mount, j bolt, anchor fastner etc. the

nut bolt used for installtion of stucture should be (SS 304)

quality.The ground clearance of the bottom most edge of

solar panel shall not be less than 300 mm to 1200 mm or

as per site’s technical/feasibility requirement.

24 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

a. Column –The minimum section (thickness) should be

b. Rafter - The minimum section (thickness) should be

c. Purlin - The minimum section (thickness) should be

40MM * 40MM Balane of System with necessary

Swichgears (Suitabel size and protection of ACDB &

DCDB), inter connecting wiring, earthing system as per

the CEIG drawing approval, lightining arrester system as

per the CEIG drawing approval, all liasoning work with

various gov. dipartment like state nodal agency,DISCOM

& CEIG is included in agency scope (Excluding All

charges namely GEDA Application fees, Solar

connectivity Charges, Meter connectivity Charges, Meter

testing Charges and system stability/strenthning

charges.) (D) Grid Tied Solar Power System: 26 - 50 kW (3 -

Total of Ele Items (B) Rs.

Total of (A)+ (B) Rs.

Amount of my tender work out as under

I / We am/are willing to carry out the work at ………………………………………….. % above / below

Percent [should be written in figures and words] of the estimated rates mantioned above. Amount of

my/our tender works out as under

Estimated Amount Put to tender: Estimated Amount Put to tender:

Deduct % below Add % above

Net Rs. Net Rs.

In words : In words :

Signature of Contractor

Deputy Executive Engineer Executive Engineer

City (R&B) Sub Division Jamnagar (R & B) Division,

Jamnagar Jamnagar.

25 of 26 DTP of Tribal Hostel Bldg 06-26

Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount

No. and reference to book of specifications)

1) The work shall be carried out as per Public Works Department Hand Book, I.S. Specification and

other specification of the Division or as Directed.

2) All the columns in Schedule should be filled in INK and the total of the entries in the last column

should be strike out by the Contractor under his Signature.

3) Rates should include clearance of site (Prior to commencement of work and its close) in all

respect and good for work under all conditions of site moisture weather etc.

4) The Contractor shall exhibit the details of works, Tenders amount and specification as per Govt.

Circular No. TD 32772 N. Dt. 26-4-78 and as per G.R. No. TNC-9-24-C, Dt. 18-11-91, as directed by

Engineer-in-Charge of the works, on board at site of the work.

5) Contractor shall even "NIL" percentage, if no deduction is offered.

6) Testing of materials shall be as per statement attached with the specification. The material shall

be tested in GERI Bill for the testing shall be paid by the Executive Engineer and 1% of amount put

to tender after deducting the cost of materials to be supplied by Department as per SCHEDULE

'A' at the sanctioned estimate rates from the Contractor in Running Bills. (As per G.R.No. (R&B)

TNC-1085/4/C Dt. 20-12-91 and modified ide (R&B) Deptt. Circular No. SSR/10000092-IB-12910-C

7) For R.C.C. Item where there is change of grade mix or charge as per actual mix design the

difference of cement consumption shall be deducted from rate of original item at the rate of star

rate mentioned in the tender.

8) 1% L.C. shall be deducted from the bill as per agreement.

9) GST will be paid extra as per Govt. Emendment.

10) GST and Income tax will be deducted at source while making payment of bills

Signature of Contractor

Deputy Executive Engineer Executive Engineer

City (R&B) Sub Division Jamnagar (R & B) Division,

Jamnagar Jamnagar.

26 of 26 DTP of Tribal Hostel Bldg 06-26