GE AF/AMB-26/2020-21 REPAIRS TO PATHS HARD STANDING DRAINS BOUNDARY WALLS FENCING SEWAGE LINES AND CAMOUFLAGE PAINTING AT SITE-IV KALPI UNDER GE AF AMBALA

Amount

Excavating in post holes (or similar holes) each not exceeding 0.5cum, returning, filling in, getting out in soft / loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance not exceeding 50m complete all as specified and as directed

Surface dressing not exceeding 15cm deep in soft / loose soil including cutting/pruning shrubs, grass, vegetation, etc. and removing upto a distance exceeding 50m but not exceeding 100m complete all as specified and as directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc.not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m but not exceeding 3m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc.not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed

Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed

Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed

M&L for hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, using broken stone or boulders complete all as specified and as directed

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed

M&L for dismantling rusted / damaged fencing of any size / type from any height and disposing off complete all as specified and as directed

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris complete all as specified and as direc

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in cover slabs, removing debris from site and making good the disturbed surfaces / portions in existing specifications complete all as specified and as directed

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed

Demolition and breaking up 150mm bore drain pipes (salt glazed stoneware, AC or reinforced concrete) set in cement mortar and disposing off outside MD land including all cartage, etc. complete all as specified and as directed

Demolition and breaking up 150mm bore drain pipes (salt glazed stoneware, AC or reinforced concrete) set in cement mortar and disposing off outside MD land including all cartage, etc. complete all as specified and as directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed

Dismantling stone slabs / tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and disposing off complete all as specified and as directed

M&L for 75mm thick plain cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate as in floors, plinth protection, etc. including making spike rolling to surfaces or making impressions of expanded metal whilst the concrete is green laid in alternate bays of 3m length and joints between bays filled with 85/25 grade bitumen and sand mix @ 1:2 complete all as specified and as directed

M&L for plain cement concrete 1:3:6 (type C-1) using 20mm graded stone aggregate as in embedding fencing posts, foundations, etc. complete all as specified and as directed

M&L for plain cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate as in beds of drains, etc. complete all as specified and as directed

M&L for plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregate as in foundation filling, mass concrete, etc. complete all as specified and as directed

M&L for 75mm thick plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregate as in sub-bases, pavings, etc. complete all as specified and as directed

M&L for plain cement concrete type B-1,1:2:4 (using 20mm graded stone aggregates) in locking of edges of inter-locking tiles, padding, PCC bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, etc. complete all as specified and as directed

M&L for 100mm thick plain cement concrete type B-1,1:2:4 (using 20mm graded stone aggregates) as in paths, floors, etc. finished to receive floor finishes, etc. complete all as specified and as directed

M&L for plain cement concrete type B-1,1:2:4 (using 20mm graded stone aggregates) as in coping, kerbs, throating, etc. including all necessary formwork, etc. complete all as specified and as directed

M&L for plain cement concrete type B-1,1:2:4 (using 20mm graded stone aggregates) as in bedding to drains, surface channels, etc. complete all as specified and as directed

M&L for plain cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate for bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for drain pipes complete all as specified and as directed for the following bores:

100mm bore

150mm bore

M&L for plain cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate for bed to drain pipes including packing under and haunching completely surrounding the pipes after they are laid and tested for drain pipes complete all as specified and as directed for the following bores:

100mm bore

150mm bore

M&L for precast RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregates as in cover slab for man holes, drains, soak wells, and similar articles, set in CM 1:4 with plain faces including necessary formwork and chamfering, weathering, throating, etc. complete all as specified and as directed

M&L for mild steel TMT bars grade Fe-500D, 10mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for mild steel round bars 8 to 10mm dia and over, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in supports to chain link fencing complete all as specified and as directed

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm in length, dia of neck & shank 10mm complete all as specified and as directed

S&F angle iron posts & struts in fencing including cutting top to shape, drilling holes, notching for wire including all necessary drilling bolts or rivetting & similar works conforming to Fe-410W grade E-250 quality -'B' (for securing chain link fencing, etc.) complete all as specified and as directed

S&F MS flat iron fillets (for securing wire mesh, fencing, etc.) including all necessary drilling bolts or rivetting and similar works conforming to Fe-410W grade E-250 quality -'B' complete all as specified and as directed

Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provisioning of binding wire complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed

--ditto-- all as per serial item No. 40 hereinabove but except bricks

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan as in half brick thick walls built in CM (1:4) complete all as specified and as directed

--ditto-- all as per serial item No. 42 hereinabove but except bricks

M&L for brickwork with sub-class ‘B’ bricks in brick-on-edge walls (less than ½ brick thick), built in CM 1:4 complete all as specified and as directed

M&L rendering 15mm thick in cement mortar (1:4) on fair surfaces of PCC block / brick masonry wall / concrete surfaces, inner sides of drains, etc. finished even and smooth without using extra cement complete all as specified and as directed

M&L for raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement or cement lime mortar complete all as specified and as directed

M&L for flush pointing to brick walls in CM 1:3 complete all as specified and as directed

M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brickwall or concrete surfaces complete all as specified in SSR Part-I clause 14.22 complete all as specified and as directed Note: Rough cast finish shall be made as under: (i) After applying the under coat of cement mortar 1:3 and while it is still in plasic state the rough cast mixture consisting of crushed stone or fine gravel / aggegates (of size between 6 to 12mm depending on the texture required) mixed with course sand and cement in the ratio of 1:1:1 shall be applied and finished even (ii) The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered

M&L for preparing of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed

M&L for preparing of old steel/ metal surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint (tint as approved) to fencing posts, angles, fencing, etc. including all staging, safety measures for working at heights upto 6m complete all as specified and as directed

M&L preparation of new plastered / unplastered masonry / concrete wall surfaces, etc. and applying two coats of exterior acrylic anti-fungal paint (tint as approved by the GE) over a coat of wall primer as per manufacturer's instructions with all staging as required complete all as specified and as directed

M&L preparation of old treated plastered / unplastered masonry / concrete wall surfaces, etc. and applying two coats of exterior acrylic anti-fungal paint (tint as approved by the GE) in camouflage pattern as per manufacturer's instructions with all staging as required complete all as specified and as directed

M&L preparation of old treated plastered / unplastered masonry / concrete wall surfaces, etc. and applying one coat of exterior acrylic anti-fungal paint (tint as approved by the GE) as per manufacturer's instructions with all staging as required complete all as specified and as directed

M&L preparation of old treated plastered / unplastered masonry / concrete wall surfaces, etc. and applying one coat of exterior acrylic anti-fungal paint (tint as approved by the GE) in camouflage pattern as per manufacturer's instructions with all staging as required complete all as specified and as directed

M&L for chequered cement concrete tiles 200x200x25mm thick, set, jointed and pointed in neat cement slurry in floors laid 15mm over bedding layer in CM 1:4 (cost shall be inclusive) complete all as specified and as directed

M&L for laying pre-polished 80mm thick rubber moulded, double glossy, coloured, designer, interlocking tiles made of M-40 design mix concrete of approved design and shape with the crushing strength not less than 250kg/sqcm laid over and including 25mm thick (compacted thickness) sand bed (rate shall be inlcuded) complete all as specified and as directed

Supply and laying slat glazed stone ware pipe, 150mm dia (internal dia), laid in trenches, jointed in cement mortar 1:2 including testing on laying / fixing complete all as specified and and directed

S&F PVC (SWR) pipes, 110mm bore, single socketed in any length with rubber ring joints laid in trenches / floors complete all as specified and as directed

M&L for desilting of box / open drains, etc. by removing either by mechanical or manual means, the exiting slush/hardened silt/sludge/ any other hardened debris accumulated over a period and in foul conditions (debris like concrete pieces, stone boulders, hardened lime, etc.) including taking out these materials through existing manholes/openings with a lift upto 2m, transportation and depositing at a point within a lead exceeding 50m but not exceeding 100m, spreading, dressing and leveling the heaps to a level not higher than 1m level including all tools, tackles, equipment, labour, etc. complete all as specified and as directed

M&L for cleaning / de-sludging of septic tanks / sewage sump wells of capacity upto 50 users, using mechanical pumps, diesel driven, with fuel, operator, etc. and all necessary tools / plants including loading and carting off the drawn sludge, waste material, scum, spoil water, etc. outside MD land through designated sludge carriers / bio tanks complete all as specified and as directed

Notes for serial item Nos. 59 & 60: (i) All necessary precautions and all safety measures as per Municipality rules / relevant regulatory guidelines shall be taken by the Contractor in employing his workmen in foul conditions to prevent any health hazards, etc. (ii) The Contractor shall be solely responsible for any mishap to any of labourer deployed and to equipment/machinery/plants/material, etc. brought at site for work and any lapses whatsoever during the execution, (iii) The work shall be executed under the supervision of highly skilled tradesman / supervisor, (iv) The rates quoted shall be deemed to be inclusive of the above aspects, and no claims whatsover shall be entertainable at later stages and or during execution

Esha Engineers

Anil jindal and sons

M/s R.K.Jain

AAR PEE ENTERPRISES