Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.0 LAccepted-AOC C O M KHARKARANG LUMJINGSUK BLOCK A MADANRTING SHILLONG 793021 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793021 | L1 | Accepted-AOC L1 | |
| 2 | L2₹9.8 L+₹72,321.52 (8.00%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹9.9 L+₹83,524.07 (9.24%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
24 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I AF Kumbhirgram
AGE I AF Kumbhirgram Military Engineer Services PO Kumbhirgram Assam Pin 788109 Tele 03841282376
PROVISION OF CERTAIN MINOR AND REVENUE WORKS AT AF STN KUMBHIRGRAM
2022_MES_567222_1
8446/2022-23/E8
Open Tender
Civil Works
Item Rate
180 days
AF STATION KUMBHIRGRAM
As per NIT
8 documents required · 8 mandatory
₹500
Yes
AGE I AF Kumbhirgram
₹18,000
Yes
18 Feb 2023
3 Dec 2022
26 Dec 2022
3 Dec 2022
24 Dec 2022
10 Dec 2022
Amount
Excavating over areas, n exc 1.5 m deep and getting out Soft/ loose soil complete all as specified and as directed.
Materials and labour for Hardcore of gauge of broken stone or boulders n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in sub base floor,or in hard standing, finished even and rough complete all as specified and as directed.
Materials and labour for pre polished chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment with screed bed or bedding layer of cement mortar 1:6 in 15 mm thick for laying floor finishes complete all as specified and as directed.
Materials and labour for Finishing walls with Acrylic Smooth exterior paint of required shade two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over new surfaces of walls including preparation of surface of walls, complete all as specified and as directed.
Materials and labour for preparing of old surfaces of walls and applying two coat of oil emulsion distemper on the same after complete removing the existing treatment and preparation of internal wall surfaces with minimum1mm thick oil putty and appying one coat of primer, complete all as specified and as directed.
Supply and fixing of SS railing (304 grade) with newel post and Caps (turned to match section of handrail and mitred in) including handrail screws,dowels and SS welding (dia of cap twice the width of handrail) and balusters complete all as specified and as directed.
Material and labour for brick work with sub class 'B' bricks laid flat in side of drain/channel, jointed and pointed in cement mortar (1:6), complete all as specified and as directed.
Material and labour for 10 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement, complete all as complete all as specified and as directed.
Demolition of concrete (Un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Material and labour for 75mm thick PCC (1:2:4) type B2 as in plinth protection using 40mm graded stone aggregate, finishing cement concrete surface even and smooth without using extra cement, laid in alternate bays including filling of joints with mastic filling using one part of bitumen 80/100 grade mixed with three part of dry sand complete all as specified and directed.
Material and labour for plain cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in surface channel/drain, complerte all as specified and as directed.
Extra for forming fair finished drain or channel avg 30 cm inner girth in cement concrete, using extra cement, including forms moulds, mitred/stopped ends etc complete all as specified and as directed.
Supply and fixing on wall 1.5 Ton capacity, convertible inverter split type, Air Conditioner indoor/outdoor unit complete with cordless remote unit and with 5 - in -1cooling mode,anti bacteria filter, 100% copper condenser coil with minimum BEE 5 Star rating with inbuilt invertor, 230V 50 Hz single phase electric input complete all as specified and as directed. Make : Voltas/Hitachi/LG/Samsung/Bluestar
Supply and fixing automatic boost/buck transformer for low and high voltage correction, equippied with electronic transistorised relay suitable for correction on single phase 50 cycles AC supply complete with voltmeter and designed for input voltage 175 V to 250 V and out put voltage stabilized between 215V to 240 V all as suitable for 5 KVA complete all as specified and as directed. Make :- V-Guard/APLAB/VOLINA
Materials and labour for sub main wiring of two single core PVC insulated unsheathed stranded copper conductor cables of size 6 Sqmm, 1100 volts grade, drawn through and including 20 mm dia PVC surface conduit/casing caping including all fixing accessories, and 6 sqmm PVC insulated stranded copper conductor cable as earth wire connected to earth dolly complete all as specified and directed. (Phase-Red, Neutral – black in colour of cable) Note:- Both running cables including earth wire including one run pvc conduit pipe shall be measured and paid for as single length.
Supply and fix sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin and earth plug and socket complete with one no MCB (SP) 230 volts, 20 Amps complete all as specified and as directed.
Supply and fix stand suitable for out door unit including necessary fittings and fixtures with clamps fixed to Wall/Floor all as per site requiment complete all as specified and as directed.
Supply and fix flexible PVC drain pipe 15mm dia including clamp and fittings from indoor unit upto drain complete all as specified and as directed.
Taking down chowkats or frame, n. exc. 1.50 Sqm each with shutters (without taking off shutters from the frame) and unserviceable materials removing from the site, complete all as specified and as directed.
Taking down chowkats or frame with shutters (without taking off shutters from the frames ) exc. 1.5 sqm but n.exc. 4 sqm each complete all as specified and as directed.
Disconnecting existing tanks exc 500 Ltrs but n exc 1000 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after throughly cleaning, repairing, etc. complete all as specified and as directed.
Supply and fix solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and as directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed.
Supply and fix mild steel butt hinges 75mm size, medium weight, cold rolled and fixed, ISI marked,complete all as specified and as directed.
Supply only mild steel butt hinges 100mm, medium weight , clod rolled and fixed, ISI marked, complete all as specified and as directed. NOTE : Cost of fixing/labour charges of MS butt hinges included against BoQ Item Nos.16 here-in-after.
Supply and fix 100 mm Aluminium handles, cast type, anodised,extruded section and fixed complete all as specified and as directed.
Supply and fix 150 mm Aluminium barrel tower bolt,anodised, extruded section and fixed complete all as specified and as directed.
Supply and fix 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed
Taking down existing tarfelt, roof tiles and cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50 m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust complete all as specified and as directed.
Materials and labour for 15 mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane, finished even and smooth without using extra cement complete all as specified and as directed. (NOTE : Polymeric membrane shall be measured and paid separately under relevant item ).
Materials and labour for PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, finished even and smooth on exposed concrete surface without using extra cement complete all as specified and as directed. (Note: Water proofing compound shall be measured and paid perarately under relevant item as supply only).
Supply only integral water proofing compound conforming to IS:2645-1975, complete all as specified and as directed.
Material and Labour for water proofing treatrment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bitumenous primer @ 0.25 ltrs per Sqm over plastered surfaces of roof incl parapet surface. (b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3mm thick weight not less than 3.50 Kgs per Sqm reinforced with non woven polyester febric weight not less than 160 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note :- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) APP bassed polymeric membrane shall be "Dr Fixit" manufacturered by M/S Pidilite Industries or "MOPLY FP 4MM" manufactured by M/S Texsa India Limited and 'Hyperplus" by IWL India Limited/ STP Ltd/ SIKA. (iv) Applying Aluminium paint @ 0.125 ltrs per Sqm over APP membrane.
Supply and fix pressed steel frames of size 125X60mm made out from 1.25mm thick MS sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fasts etc., complete all as specified and as directed. NOTE : Cost of MS butt hinges measured and paid separately under respective items of BoQ.
Material and Labour for cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frames of pressed steel and in bed blocks and like etc complete all as specified and as directed.
Supply and fix 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
Supply and fix second class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. divided into squares with plain, chamfered or rounded, mitred and sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.20(b), complete all as specified and as directed.
Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples fixed complete all as specified and as directed.
Material and Labour for cutting holes in brick walls, built in cement mortar for taking out or inserting hold fasts, in exc. half brick but n. exc. one brick thick walls and making good with PCC 1:2:4 (using 12.5mm graded crushed aggregate) including formwork as required and disturbed wall surfaces with cement mortar 1:4 to match the existing surfaces, complete all as specified and as directed.
Material and Labour for preparing previously untreated steel surfaces, of any description and girth not otherwise described and treating with tar or coal tar black paint to backs of chowkats frame, etc. area tarred exc. 0.1 Sqm but n. exc. 0.5 Sqm each including sanding with clean sharp sand after tarred, complete all as specified and as directed.
Material and Labour for preparing previously untreated steel surfaces of any description and girth not otherwise described and treating with tar or coal tar black paint to small articles such as holdfasts, etc., area tarred n. exc. 0.1 Sqm each including sanding with clean sharp sand after tarred, complete all as specified and as directed.
Material and Labour for preparing surfaces of new wood and wood based surfaces and applying two coats of synthetic enamel painting over a coat of pink primer, exc. 10cm with or girth, complete all as specified and as directed.
Material and Labour for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
Niranjan Roy
M/S ANITA ROY and SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .