Improvement of water supply by development of source and storage arrangements to Patnagarh NAC

Earth work in all kinds of soil within 50 M initial lead and 1.5 M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm. And laying in layers not exceeding 0.3 M in depth and as per direction of the Engineer-in-charge.

Earth work in slushy soil (in water upto 0.6m depth requiring the aid of pans and vessels) within 50m lead and 1.5m initial lift as per the direction of Engineer in charge. 2nd depth (1.5 to 3mtr)

Providing all labour , T&P, and laying in trenches , Horizontal CI / GI / MS double flenged Pipes conforming to IS:7181 (Part-X) Class B, of the following nominal diameter as per specification, complete. (Earthwork in trenches , jointing of pipes, specials and fittings to be measured and paid for separately.) 250 mm dia MS pipe

Providing flanged joints to flanged CI/ M.S. pipes and fitting to the following nominal dia including testing and joints but excluding the cost of nut, bolt, washer etc.all complete 250 mm dia MS Pipe

Shoring and shuttering foundation trenches, pits etc. with close wooden planks or sheets shuttering etc.all comlete.

Providing all materials, labour T&P etc for filling filter media around slotted pipe for filtration with 12 mm to 25 mm chips including all cost conveyance, royalty etc. all comlete and as per the direction of engineer in charge. A)12 mm size to 25 mm chips

B ) 25 mm size to 40 mm chips.around pipe

C )40 mm size chips.around pipe

Providing all labour T&P etc for refilling the gallery line with all kind of excavated materials etc. all complete.

Providing all labour T&P etc for hire charges of disel pump with disel, consumable,operator etc all complete.(To be paid as per actuals.) 5 HP Diseal Pump 5 nos x 6 days x 12 hours daily

Cost of BSW Nut bolt

Cost of 250 mm dia MS Blank flange.

Supplying all materials, labour, T&P for laying of 250 mm dia MS Slotted gallery pipe

Supplying all materials, labour, T&P for laying of 250 mm dia MS Plain gallery pipe 5mm thick both side flange

Providing & fixing of Puddle collar with double flange ends for water works purpose for the following nominal dia. Including cost of nuts,bolts, rubber insertation including cost of Puddle collar as per specification complete.

Design, Drawing, Construction, Commissioning & Testing of R.C.C Elevated Service Reservior(ESR)Shaft type wall with piping arrangement at Patnagarh Town with loading,delivery,overflow and washout piping arrangement up to 5 Mtr from external face of the shaft wall etc. all complete as per directtion of Engineer-In-charge. i) 25 mtr staging

ii)25 mtr staging

Supply & Installation of 45 KVA DG Set with RCC Foundation, DG Set sheet shed with pipes ,Chemical Earthing-4 nos ,& Aluminium Power Cable of Required Length as per DG KVA Rating & Type and Control Cable for AMF DG Set of Required Length.This Includes transportation to the site, Trail run with Required Amount of Disel, Commissioning, Changeover and Anyother Instructions as per Direction of the Engineer -In-Charge

Laying of Rising and Distribution pipe line Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Dismantling of Lime Concrete, cement concrete grade M-10 and below including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres (Cutting of cement concrete road)

Supplying all materials, labour T&P for laying in trenches centrically cast (spun) D.I pressure, socket & spigot pipes Class-K9 & K7 without cement mortar lining , confirming to IS.8329-2000 of the following nominal diameter as per specification complete with local transportation of 5 Km (Earth work in excavation in trenches jointing of pipes & fittings to be measured & paid separately) i)100 mm dia DI-K7 pipe

ii)150 mm dia DI-K7 pipe

iii)200 mm dia DI-K9 pipe

Making Tyton joints using rubber rings to spun iron or cast iron pipes & fittings of the nominal diameter including testing of joints including cost of rubber rings etc. complete as per PH specification. i) 100 mm dia

150 mm dia

200 mm dia

Filling foundation and plinth with excavated materials (in all kinds of soil)

Filling foundation and plinth with sand watered & rammed.

Cement concrete (1:3:6) with 4cm. size hard granite Cruser Broken metal.

Cement concrete (1:2:4) with 12mm. size hard granite Cruser Broken chips.

Cement concrete (1:1 ½:3) with 12mm. size chips including cost of Centering & shuttering charges

Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.

Brick work with Fly ash. bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg./Cm2 with dimentional tolerance + 8% in cement mortar (1:6) in foundation & plinth.

16mm thick cement plaster (1:6) over brick or stone masonary including punning.

Supplying all materials, labour, T&P for lifting of surplus earth within 5 KM by mechanical means.

Laying in trenches MS pipes of all Classes conforming to IS:3589 - 2001 & IS:3601 - 2006 of the following outside diameter as per specification complete including cost of pipe (Earthwork in trenches, jointing of pipes, specials and fittings to be measured separately) 114.3 mm outer dia M.S Pipe ( 5.4 mm thick )

168.3 mm outer dia M.S Pipe ( 4.5 mm thick)

Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.

Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site by using welding generator including testing of joints, as per specification complete

Providing flanged joints conforming to IS:3114-1994 to flanged Cast Iron pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification complete i)100mm dia pipe

ii)150mm dia pipe

Supplying all materials, labour and T & P etc. and laying in trenches double socket Cast Iron bends, fittings and specials conforming to I.S : 1538 of the following sizes as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete.

Fixing Cast Iron Sluice Valve with double flanged ends for water works purposes conforming to IS 14846 - 2000 for the following rating and nominal diameters as per specification complete(P.N-1.6) i)100mm dia

150mm dia

Supplying of 100 mm dia Sluice Valve P.N-1.6

Supplying of 150 mm dia Sluice Valve P.N-1.6

Supplying and Fixing of 100 mm dia DI MJ Collar

Supplying and Fixing of 150 mm dia DI MJ Collar

Supplying and Fixing of 100 mm MS Flange 10 mm thick

Supplying and Fixing of 150mm MS Flange 10 mm thick

Supplying and Fixing of 150 mm dia CI foot valve

Supplying and Fixing of 150 mm dia C.I NRV P.N-1.6

Cost of D.I fittings 100 mm to 250 mm

Design,drawing & Construction of Frame structure RCC roof Slab 4.0 Mtr height Pump house complete in all respect as per techniccal specification and as per direction of Engineer-IN-Charge(2 Nos 30Sqm each)

Design,drawing & Construction of Frame structure RCC roof Slab 4.0 mtr height for chemical house including stair case and parapet wall camplete in all respect as per techniccal specification and as per direction of Engineer-IN-Charge

Design,drawing & Construction of Frame structure RCC roof Slab 4.0 mtr height for Store Room complete in all respect as per techniccal specification and as per direction of Engineer-IN-Charge

20mm. Thick cement plaster (1:6) for stone work. Existing Intake wall,Hatapada

Wall painting Two coats with weather coat paint of approved shade on new work to give an even shade including cost of paint. Badpadar-I

Brick work with Fly ash. bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg./Cm2 with dimentional tolerance + 8% in cement mortar (1:4). in superstructure

12mm. thick cement plaster (1:6) on brick work

Supply, Testing and commissioning of 30HP open well . Horizontal Submersible pump set having 34 to 44 mtr head & 45 to 55 lps discharge (LHS-41) (Make- Kiloskar/KSB/Crompton Greaves) 4No X 30HP= 120HP

Supply,Indtallation, Testing and commissioning of 20.0 HP open well . Horizontal Submersible pump & motor having without Control Panel having 50 to 60 Mtr head & 21 to 26 lps discharge (source-2) (Make- WIPL/Mather+Platt/KSB/Crompton Greaves)

Supply, Fitting and Fixing of 6mm² core Copper flat Cable (Make-Havells / L&T /Finolex / BCH / Polycab)

Supply, Fitting and Fixing of 10mm² core Copper flat Cable (Make-Havells / L&T/ Finolex /BCH/ Polycab)