REPAIRS TO JOINERY, ATT AND CERTAIN B/R WORKS AT SOUTH SIDE OF RUNWAY AT AF STN JODHPUR

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and removing from site complete all as specified & directed by the Engineer-in-Charge.

Material & labour for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe 410-W (GdeE- 250) quality-A complete complete all as specified and as directed.

Material & labour for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in bed blocks etc for embedding hold fasts complete all as specified and directed by Engineer-in-Charge

Supply & fixing solid PVC door frame of size (50mmX47mm) made out of 5 mm plain colour PVC sheet reinforced with MS Square tube fixed with 75mm long MS screws with PVC fasteners to wall all including repair of james of wall finishes & fixing in opening as per specification & drawing complete all as specifiedd & directed by the Engineer-in-Charge.

Supply & fixing factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, & fixing in frame at site as per specification & drawing complete all as specifiedd & directed by the Engineer-in-Charge

Supply & fixing 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specifiedd & directed by the Engineer-in-Charge.

Supply & fixing flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides and decorative on other side complete all as specifiedd & directed by the Engineer-in-Charge

Material & labour for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge

Supply & fixing butt hinges, medium weight, cold rolled, stainless steel of size 100 mm complete all as specifiedd & directed by the Engineer-in-Charge

Supply & fixing stainless steel barrel tower bolt of 200 mm long complete all as specified and directed by Engineer-in-charge.

Supply & fixing stainless steel sliding door bolts with hasp, staple bolt type and fixing clips of sheet of 300 mm long complete all as specified and directed by Engineer-in-Charge.

Supply & fixing stainless steel handle of 150 mm long complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs stainless steel barrel tower bolt of 200 mm long complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repairs stainless steel sliding door bolts with hasp, staple bolt type and fixing clips of sheet of 300 mm long complete all as specified and directed by Engineer-in-Charge

Supply & fixing in repairs stainless steel handle of 150 mm long complete all as specified and directed by Engineer-in-Charge

Supply & fixing factory made uPVC white colour sliding window Area not exceeding 2.00 sqm each. Three track made of extruded profiles with wall thickness of 2.3 mm (±0.2mm). Window profile with hollow section with multi chamber, Frame (88mmX52mm), sliding sash (42mmX67mm),sliding mesh sash (42mmx57mm) Sliding interlock (One vertical length in each shutters) (45.5mmX28mm), Glazing bead (24.5 mm x16mm) will be mitered cut and fusion welded at all cornes, including railing of holes for fixing of hardware and drainage of water etc., making arrangment for fixing of hardware, EPDM gasket, 1.2±0.2mm thick galvanized steel frame (30mmX18mm) 2nos,sliding sash (30mmX18mm),sliding mesh sash (26mmX10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mmX100mm long fasteners. Hardware : (Touch Lock of zinc alloyed (white powder coated ), stainessless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and required accessories). (Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. net opening will be measured for payment )

Supply & fixing factory made uPVC white colour sliding window Area exceeding 2.00 sqm each. Three track made of extruded profiles with wall thickness of 2.3 mm (±0.2mm). Window profile with hollow section with multi chamber, Frame (88mmX52mm), sliding sash (42mmX67mm),sliding mesh sash (42mmx57mm) Sliding interlock (One vertical length in each shutters) (45.5mmX28mm), Glazing bead (24.5 mm x16mm) will be mitered cut and fusion welded at all cornes, including railing of holes for fixing of hardware and drainage of water etc., making arrangment for fixing of hardware, EPDM gasket, 1.2±0.2mm thick galvanized steel frame (30mmX18mm) 2nos,sliding sash (30mmX18mm),sliding mesh sash (26mmX10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mmX100mm long fasteners. Hardware : (Touch Lock of zinc alloyed (white powder coated ), stainessless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and required accessories). (Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. net opening will be measured for payment )

Material & labour for preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete all as specified & directed by the Engineer-in-Charge.

Material & labour for preparation of new wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of aluminium wood primer complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 150 mm floor door stopper of aluminium alloy body and tongue andodised with hard drawn steel spring fixed in floor complete all as specified & directed by the Engineer-in-Charge.

Supply and fixing in repairs of 150 mm aluminium handles cast type anodised complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Aluminium Anodized powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows, ventilators, partion wall with one or more rebates including joining cleat for fixing etc complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 5.5 mm thick froasted glass panes and glazing with oil putty or fix in aluminium door / widnow complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 5.50 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified & directed by the Engineer-in-Charge.

Material & labour for repairs to Aluminium doors exceeding 1.50 Sqm but not exceeding 5.00 Sqm by necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges anodised aluminium snap beading screw etc including chowkhat and refixing in the same opening after complete repair except glass complete all as specified & directed by the Engineer-in-Charge.

Material & labour for repairs to Aluminium doors not exceeding 1.50 Sqm by necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges anodised aluminium snap beading screw etc and refixing in the same opening after complete repair except glass complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs Aluminium door closer hydraulically regulated, designation No 1, universal type of weight not more than 35 kg complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs double action floor spring hydraulically regulated made up of of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified & directed by the Engineer-in-Charge.

Material & labour for ANTI-TERMITE TREATMENT by providing and injecting Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & directed by the Engineer-in-Charge.

Material & labour for ANTI-TERMITE TREATMENT of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified & directed by the Engineer-in-Charge.

Material & labour for ANTI-TERMITE TREATMENT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified & directed by the Engineer-in-Charge.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, removal of debris outside MOD land complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Mild steel sliding door bolts 200mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Aluminium mortice lock of 4 lever vertical type, size 100 mm for doors complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing in repairs 18 mm thick solid PVC ply of 1st quality of one side prelaminated of apprvoed colour and one side white colour fixed with screws, solvent cement / adhesive to make kitchen cabinate and cupboard shutters complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing stainless steel handle of 110mm size as peer approved sample for kitchen cabinate and cupboard shutter complete all as specified and directed by the Engineer-in-Charge..

Supply & fixing Sliding telescopic channel high grade mild steel, bright finish or electrogalvanised of size 20'' as per approved sample complete all as specified & directed by the Engineer-in-Charge.

Supply & fixing Magnet catch for CB/Cabinet shutters as per approved sample complete all as per specified and directed by the Engineer-in-Charge.

Supply & fixing Continuous (piano) hinges, mild steel , bright finish or electrogalvanised for 30 mm width of flaps (when open), complete all as specified and directed by the Engineer-in-Charge.

Supply & fixing brass locks of 4 levers for cupboard, grade I, size 65mm complete all as specified and directed by the Engineer-in-Charge.

DEV INDUSTRIES

Om Trading Corporation