Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.6 LAccepted-AOC GOEL MARKET BARARA 133201 | BARARA | AMBALA | HARYANA | 133201 | ₹1.6 L | 1 | Accepted-AOC ok |
| 2 | 2₹2.2 LRejected-Finance | ₹2.2 L | 2 | Rejected-Finance ok |
| 3 | 3₹2.6 LRejected-Finance 233 12 AMARGARH GAMRI GALI NO 11 KAITHAL 136027 | KAITHAL | KAITHAL | HARYANA | 136027 | ₹2.6 L | 3 | Rejected-Finance ok |
| 4 | 4₹3.3 LRejected-Finance THE CHEVISH CO OP L AND C SOCIETY LTD ALAWLA VPO ALAWLA TEHSIL ASSANDH DISTRICT KARNAL 132036 | ALAWLA | KARNAL | HARYANA | 132036 | ₹3.3 L | 4 | Rejected-Finance ok |
| 5 | 5₹3.4 LRejected-Finance PLOT NO 11 SAWANPURI JAGADHRI 135003 | YAMUNANAGAR | HARYANA | 135003 | ₹3.4 L | 5 | Rejected-Finance ok |
| Sl No | Description | Qty | Unit | The Radhika Co-Op L&C Society Ltd. L1 | THE DISIKA CO-OP LC SOCIEY LIMITED L4 | The Multani Enterprises Co-operative Labour and Construction Society ltd L3 | M/S THE BATRA CO OPERATIVE LABOUR & CONSTRUCTIONSOCIETY LIMITED ,AMBALA L5 | The Chevish Coop. L&C Society Ltd. Alawla L2 | THE DADA TULSI RAM COOPERATIVE LABOUR AND CONSTRUCTION L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Providing and fixing Leg Press in a pair with below specifications:- Dimensions (LxWxH): 1750x550x1600mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 50mm (G.I) ‘C’ Class pipe. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.
Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.
1. ISO 18001
2. ISO 50001:2018
3. ISO 45001:2018
4. ISO 14001:2015
5. ISO 9001:2015
6. DIN 79000-2012
7. EN 16630:2015 | 1 | Each | 29,700 ₹29,700 | 50,000 ₹50,000 | 48,800 ₹48,800 | 75,555 ₹75,555 | 75,000 ₹75,000 | 80,000 ₹80,000 |
| 2.00 | Providing and fixing Seated Chest Press in a pair with below specifications:- Dimensions (LxWxH): 1800x700x2000mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80- 120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.
Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.
1. ISO 18001
2. ISO 50001:2018
3. ISO 45001:2018
4. ISO 14001:2015
5. ISO 9001:2015
6. DIN 79000-2012
7. EN 16630:2015 | 1 | Each | 29,700 ₹29,700 | 55,000 ₹55,000 | 48,800 ₹48,800 | 74,444 ₹74,444 | 75,000 ₹75,000 | 79,000 ₹79,000 |
| 3.00 | Providing and fixing Arm Wheel in a pair with below specifications:- Dimensions (LxWxH): 850x800x1800mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.
Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.
1. ISO 18001
2. ISO 50001:2018
3. ISO 45001:2018
4. ISO 14001:2015
5. ISO 9001:2015
6. DIN 79000-2012
7. EN 16630:2015 | 1 | Each | 29,700 ₹29,700 | 55,000 ₹55,000 | 39,400 ₹39,400 | 73,333 ₹73,333 | 75,000 ₹75,000 | 81,000 ₹81,000 |
| 4.00 | Providing and fixing Double Cross Walker with below specifications:- Dimensions (LxWxH): 1600x600x1600mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Handle frame of NB 32mm and 25mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). Foot support frame of 100x50x2.5mm CRC rectangular pipe. All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 50mm (G.I) ‘C’ Class pipe. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.
Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.
1. ISO 18001
2. ISO 50001:2018
3. ISO 45001:2018
4. ISO 14001:2015
5. ISO 9001:2015
6. DIN 79000-2012
7. EN 16630:2015 | 1 | Each | 29,700 ₹29,700 | 55,000 ₹55,000 | 40,000 ₹40,000 | 72,222 ₹72,222 | 60,000 ₹60,000 | 82,000 ₹82,000 |
Tender Value
₹3.3 L
EMD Value
₹6,640
Closing Date
2 Apr 2026, 5:00 pmClosed
Saurabh Goel
Municipal Corporation Ambala
Installation of open gym equipments ward no.6 Ambala city (Only for L/C societies)
2026_HRY_511059_1
202685EED789 78E8 456E A79A A2F53A41361B282ULB
Open Tender
Civil Works
120 days
Ambala City
2 documents required · 2 mandatory
₹500
₹6,640
Yes
13 Apr 2026
26 Mar 2026
3 Apr 2026
26 Mar 2026
2 Apr 2026
26 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing Leg Press in a pair with below specifications:- Dimensions (LxWxH): 1750x550x1600mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 50mm (G.I) ‘C’ Class pipe. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015 | |||||
| 2Providing and fixing Seated Chest Press in a pair with below specifications:- Dimensions (LxWxH): 1800x700x2000mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80- 120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015 | |||||
| 3Providing and fixing Arm Wheel in a pair with below specifications:- Dimensions (LxWxH): 850x800x1800mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015 | |||||
| 4Providing and fixing Double Cross Walker with below specifications:- Dimensions (LxWxH): 1600x600x1600mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Handle frame of NB 32mm and 25mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). Foot support frame of 100x50x2.5mm CRC rectangular pipe. All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 50mm (G.I) ‘C’ Class pipe. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015 | |||||
stage.html
html • 0.05 MB
techsummary_589863.pdf
BOQ Comparative Chart
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.79 MB
BOQ_589863.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
