SPL REPAIR OF DRAINAGE AT GOVIND NAGAR AND OTHER SANCTIONED WORKS UNDER GE MISAMARI

Amount

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards /Blankets/Slabs, any description and any thickness including Cover Fillets, Cornices, etc., complete all as specified and as directed.

Dismantling Boarding of any description and any position, fixed with Nails, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.

Dismantling Stone Slabs and tiles of any description or thickness in Floors, Aprons, etc., laid dry or laid dry and pointed, complete all as specified and as directed.

Dismantling AC Corrugated/ Semi corrugated Sheets as in Roofing including Ridge or Similar Pattern Roof Coverings, complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed.

Dismantling Timber Scantling 40 Sq Cm and over in Section in any position in Unframed Work, complete all as specified and as directed.

Dismantling Timber Fillet, Rails, Posts, Rafter, Purlins, etc. under 40 Sq Cm in Section in Unframed Work, complete all as specified and as directed.

Roughing surfaces of old concrete floor by picking,sweeping clean and washing down with water remove dust etc.,complete all as specified and as directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces or lathing including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing,complete all as specified and as directed.

Surface dressing n exc15 cm deep in soft and loose soil, complete all as specified and directed.

Surfaces excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and as directed.

Excavation in trenches not exc. 1.5 Metre Wide and not exc. 1.50 Metre in Depth for foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes for laying of UG Cable/Pole/Stays etc, and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Excavation in trenches n. exc 1.5 meter wide & n. exc 1.5 meter depth; for foundations, etc. n. exc. 10 sqm on plan and n. exc. 1.5m in depth and getting out in any type of soil, complete all as specified and as directed.

Excavation in trenches n exc 1.5 meter with and not exc 1.5 meter in depth for cleaning of drainage and getting out in mud, brick bats and other deposited mtrls etc, complete all as specified and as directed.

Excavation over an areas n.exc. 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over an areas exc. 1.5m deep but not exc. 3.0m and getting out in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or simlar holes) each n exc. 0.50 cm getting out returing filling in and ramming earth as broken rubble mixed with earth around in layers n exc. 25 cm watering & removing surplus soil to a distance n exc. 50 m and making good surface.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

Spreading and levelling of earth in layers n.exc 25 cm thick and well ramming incl watering, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed. (Note:Demolished material to be used for filling under floors to bring upto required level, if neccesary)

Demolition Brick Work or Stone/ Bolder masonary built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed. Note:Demolished material to be used for filling under floors to bring upto required level.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each,,complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description, not exc 1.00 Sqm Each, complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.00 Sqm but not exc 2.00 Sqm Each, complete all as specified and as directed.

Refixing door shutter of any description n.exc. 1.00 square meter each in size at same opening, complete as all specified and as directed.

Refixing door shutter of any description exc. 1.00 square meter and n.exc. 2.00 square meter each in size at same opening, complete as all specified and as directed.

M&L Second Class Hardwood in Scantlings Wrought Timber Framed and fixed complete all as specified and as directed.

All as per item no. 31 here in before but except scantling, complete all as specified and as directed.

M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in Section Clean sawn, secured with Nails, sectional area exc. 13 Sq Cm but not exc.25 SqCm , complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Brickwork with sub-class `B' bricks in brick-on-edge walls (less than ½ brick thick,) built in CM 1:4 for side walls of drains, complete all as specified and as directed.

M&L brick work with sub-class ‘B’ Bricks Straight or Curved on Plan to any radius in half brick thick built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces mixed with WPC @ 200ml per bag of cement, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 10mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 5mm thick in Cement Mortar 1:3 on Brick work or on Concrete Surfaces in ceiling, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:4 on Fair Faces of Brick Walls on plastered Surfaces mixed with WPC @ 200ml per bag of cement. Finished even and smooth on one side of lathing, complete all as specified and as directed.

All as per item No 42 but in CM 1:6 on other side of lathing, complete all as specified and as directed.

M&L Hardcore of broken stone or boulders of gauge exc. 63mm but not exc.100mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

M&L for sand filling under floors spread, levelled, watered and well rammed in layers n.esc 25 cm thick, complete all as specified and as directed.

M&L Cement Concrete 1:4:8, Type D2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. complete all as specified and as directed.

M&L Cement Concrete 1:2:4, Type B2, (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. complete all as specified and as directed.

M&L Cement Concrete 1:2:4 type B2 (40mm graded aggregate) in Surface Channels and Drains, etc. including Formwork as required/ordered at Site(s), complete all as specified and as directed.

M&L for 120 mm thick Cement concrete 1:3:6 type C2 in surface channels and drains (40 mm graded aggregate) as in foundation of drains, complete all as specified and as directed.

M&L 75mm thick Cement Concrete 1:4:8, type D2 (40mm graded aggregate), as in Sub-base finishing Concrete Surfaces Even and rough, complete all as specified and as directed.

M & L for 75mm thick cement concrete 1:3:6 type C2, using 40 mm graded aggregate as in plinth protection and finishing surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for 25mm thick Cement Concrete 1:2:4,type B1 (20 mm graded aggregate) as in floors finishing Concrete Surfaces Even and smooth without using extra cement , complete all as specified and as directed.

M&L Extra forming Fair Finished to Drains or Channels 30 Cm Inner Girth in Cement Concrete using Extra Cement including Forms Moulds Mitred/ Stopped Ends, etc., complete all as specified and as directed.

Supply only liquied Water Proofing Compound, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

All as per Item no.55 here in before but for 6mm to 8mm, complete all as specified and directed.

M&L TMT Bars 5mm dia and over upto and including 10mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L Formwork to Sides of Concrete Foundations, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., rough finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, complete all as specified and as directed.

M&L Formwork to sides of Pillars, Posts, Struts, Piers, Columns and stanchions, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Formwork to Soffits of suspended Slabs such as Roof Slabs, Floor Slabs, Landings and similar work; not exc. 200mm thick (horizontal or sloping), rough finished surfaces of Concrete, complete all as specified and as directed.

M & L for formwork to edges of concrete flats, treads, window cills, floor and roofs n exc 20 cm wide roughed finished surfacecomplete all as specified and as directed.

M&L Reinforced Cement Concrete (Nominal Mix) 1:1.5:3 (20mm graded aggregate) in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc.; Basement Slabs, Under-reamed Piles and Mass Concrete, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Reinforced Cement Concrete (Nominal Mix) A1 1:1.5:3 (20mm graded aggregate) in Columns, Pillars, Piers, Posts and Struts, etc. with WPC @ 200 ml per bag of cement, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L for RCC types A1 1:1.5:3, 20mm graded aggregate (nominal mix) as in Walls, retaining walls, basement walls, ballast walls, baffle wall and the like; any thickness; above top of footings; including attached pilaster and buttresses, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Reinforced Cement Concrete (Nominal Mix) 1:1.5:3,type A1 (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M & L for RCC (1:1.5:3) type A1 (Nominal Mix) using 20mm graded aggregates as in slabs supported on walls, beams and columns and the like mixing with WPC @ 200 ml per bag of cement, complete all as specified and as directed.

M&L for RCC type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in plinth beams and mass concrete etc, complete all as specified and as directed.

M&L Reinforced Cement Concrete (Nominal Mix) 1:1.5:3,type A1 (20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Reinforced Cement Concrete (Nominal Mix) A1 1:2:4 (20mm graded stone aggregate) as in slab supported on wall,beam and column in floor,roof,landing,balconies,canopies,deck slab and in shelves and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M& L for Providing precast RCC type B1 1:2:4 (20 mm graded aggreagae) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and as directed.

S&F Factory made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Square Tube for Top and Bottom Rails, mild steel Frame shall be covered with heat moulded plain colour PVC 'C' Channel having PVC Sheet Strip 20 mm wide stuck inside with Solvent Cement for Styles and plain colour PVC Sheet for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail, Bottom Rail Panelling of plain colour PVC Sheet to be fitted in mild steel Frame welded/sealed to the Styles and Rails with suitable Sheet Beading and jointed together with Solvent Cement and fixing in the Frame at Site as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Factory made Solid PVC Door Frame of size 50x47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Mild Steel Butt Hinge of size 50mm, medium weight, cold rolled and fixed, complete all as specified and as directed

S&F Stainless Steel Butt Hinge of size 100mm, medium weight, cold rolled and fixed, complete all as specified and as directed

All as per Item no.76 here in before but for 75 mm, complete all as specified and directed.

S&F Aluminium Handle 150mm long Cast type, complete all as specified and as directed.

All as per Item no.78 here in before but for 100 mm, complete all as specified and directed.

S&F Aluminium anodised Barrel Tower Bolt 150 mm long, Extruded Section and fixed, complete all as specified and as directed.

All as per Item no.80 here in before but for 100 mm, complete all as specified and directed.

Hacking out old/broken Glass (any thickness, size, quality or description) from Wooden Frames/metal frame, Glazed with Putty or fixed with Beads, complete all as specified and as directed.

M&L Sheet Glass, Ordinary, 3.0mm thick, Glazing in Wooden/Metal Frames and glazed with Beads or Oil Putty, area not exc. 0.50 SQM in Each Pane, complete all as specified and as directed.

M&L Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed.

M&L Factory Made Second Class Hardwood Rail and Style, 35mm thick Plain Framed Panelled Door Shutter (Two Panel) with Lock Rail and Panel of 9mm BWP Commerical Ply or 12mm Venerred Particle Board with commercial veneering on both faces. The size of rails and stiles as per IS: 1003 (Part I), klin seasoned and chemically pressure treated and fixing to Chowkat, complete all as specified and as directed.

M&L Flush Door Shutter 30mm thick, Solid Core Construction with Block Board Core and Plywood face Panels commercial type on both side with Particle Board and fitted to Wooden Chowkat, complete all as specified and as directed.

M&L Factory Made Second Class Hardwood 35mm thick Glazed and Skelton Shutters, open rebated and prepared to receive Glass, Gauze, etc. (without Sash Bars) edges of Framing plain, chamfered or rounded, mitred beads for screwing Glass, Gauge, etc. sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.24(a) and fitted to Wooden Chowkat, complete all as specified and as directed.

M&L Factory Made Second Class Hardwood 35mm thick Glazed and Skelton Shutters, open rebated and prepared to receive Glass, Gauze, etc. but divided into squares, edges of Framing plain, chamfered or rounded, mitred beads for screwing Glass, Gauge, etc. sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.24(b) and fitted to Wooden Chowkat, complete all as specified and as directed.

S&F Steel Window/ventilator with top Hung Shutters including Hinges with Steel Handle and Steel Peg Stay, complete with Glazing Bars, dovetailed or welded, complete all as specified and as directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410.Gde-E-310 complete all as specified and directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed.

S&F in repair Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed.

S&F in repair 12mm mess wire netting of galvanised steel wire 0.90mm dia fixed with tinned tacks of wire staples or nails including all laps, complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., conforming to Fe 290-W (Gde E-165) quality A, drilled for fixing of steel sheeting or other covering Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,complete all as specified and as directed.

S&F Mild Steel Sliding Door Bolt 300mm long, Plate type, Black Japanned Finish with bright Bolt not less than 12mm dia, minimum 6 Bolts and Nuts 4 on Bolt Plate 2 on Staple Plate and fixed, complete all as specified and as directed.

S&F Ordinary Rat Tail 300mm, Rod Pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.

Supply and fix 2nd class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each , complete all as specified and as directed.

S & F in repair 20mm dia, M S Powder coated , tubular curtain rail fancy type with and incl MS brackets and end stoppers,complete all as specified and as directed.

S&F aluminium anodised tubular Towel Rail, 20mm dia, D-type, 60 Cm long between Flanges with Bracket (one Pair) and fixed, complete all as specified and as directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, wastes and waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm, complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over cement screed base 15mm th in CM (1:6), complete all as specified and as directed.

M&L for 20-22 mm thick granite (of any type) table rubbed and polished in steps, jambs, window cills, cooking platforms as reqd pointing in white cement (1:2) using admixture of pigment to match shade of granite incl bull nosing of edge of slabs laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed.

M&L Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

M&L Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.06 Sqm but n.exc. 0.11 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

M&L glazed ceramic coloured tiles, glossy finished of size 600x150x7mm thick as in vertical surfaces such as skirting/dados and riser of stems., over and including including 10 mm thick rendering/backing coat in CM 1:3 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles,complete all as specified and as directed.

M&L glazed ceramic coloured tiles, glossy finished of size 300x600x7mm thick as in vertical surfaces such as skirting/dados and riser of stems., over and including including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles,complete all as specified and as directed.

M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications, complete.? (a). Priming surfaces and applying normal treatment (for moderate conditions), using glass fibre base bitumen felt grade 2 (except felt) (b). M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m over cleaned surface of any description. (c) S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified. (d) M&L Applying two coats of Aluminium Paint over APP based Polymeric Membrane.

S&F vitreous china wash down water closet pan (pedestal pattern) white incl seat cover of plastic, CP jet and pipe etc complete incl necssary PVC pipe fittings, complete all as specified and as directed.

S&F vitreous china squatting Orissa pattern Water closet, size 580 x 440 mm white, with 'P' or 'S' Trap, integral foot rests etc. complete including making good to floor, complete all as specified and as directed.

M&L Vitreous china wash hand basin, white, (flat back or angle back) of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed.

M&L in repair vitreous china wash hand basin, white, (flat back or angle back) of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed.

S&F Vitreous China Urinal, Half stall type,white/ivory (excluding Flushing Cistern, Flush Pipe and Waste Pipe) with Grating and Union for Discharge Pipe complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

S&F in PVC low level flushing cistern 10 ltrs capacity with and including fixing Flush pipe of polyethylene of low or density 32 mm dia, complete all as specified and as directed.

S&F CP brass hot & cold 15mm dia wall mixture with L bend pipe for shower provn, complete all as specified and as directed.

S&F Brass Chromium plated Shower Rose 125mm size, with or without Swivel Joints, and fixing to Steel Pipe or Union and fixed, complete all as specified and as directed.

S & F in repair PVC waste pipe of 32 mm bore of adequate length complete all as specified and as directed.

S&F PTMT grating Doom 125mm dia (minimum weight 40 Grams) complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia), Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F in repair bib Tap 15mm bore (dia), Cast Copper Alloy, Chromium Plated with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F Stop Cock 15mm bore , Fancy type, Chromium Plated with long shank, Concealed type, screwed down high pressure with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

S&F CP fancy type twin Angle valve 15mm dia (angle cock) cast copper alloy, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper Alloy, fancy type Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

S&F stainless steel soap dish, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches or in Floors complete all as specified and as directed.

All as per Item no.126 here in before but for 75 mm, complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating, Diameter of outlet 110mm, including jointing with solvent cement complete all as specified and as directed.

All as per Item no.128 here in before but for 75 mm, complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement,complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Vent Cowl, jointing with Solvent Cement and fixed, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation including taking up or down existing unserviceable pipe line , complete as all specified and as directed.

All as per Item no.132 here in before but for 20 mm, complete all as specified and directed.

Supply & laying Steel Water Tubing 15mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

All as per Item no.134 here in before but for 20 mm, complete all as specified and directed.

S&F in repair Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity (Cylindrical, Vertical with Closed Top), 3 layered, hoisted and fixed in Position all as specified in MES Scheduleincluding wash out GI Pipe 32mm of 450mm length with stopper, complete all as specified and as directed. , complete all as specified and as directed.

S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, complete all as specified and as directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed (as approved) complete all as specified and as directed.

M&L Steel Work in Tubular Trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

Supply and fix GI Snap Grid of size 605 x 605mm (Exposed Grid System) Frame Work for False Ceiling, including supporting Hanger of 2 mm GI Wi, J Bolt with necessary washers, Bolts and Nuts for securing Frame work to Ceiling and to the Snap Grid as per specification and drawing to MES schedule part-II, complete all as specified and as directed.

Supply and fix Non-Asbestos fibre decorative cement plain board E- board 4.00 mm thick, fixed to GI sanp grid 60x60 cm as in ceiling and fixed /laid/inserted to GI snap frame work with screw, complete all as specified and as directed.

M&L Second Class Hardwood Boarding 25mm thick, planed one side with butt joints, and fixed with nails as in Eave boards,complete all as specified and as directed.

M&L Cement Concrete Bed 1:4:8 type D-2 (40mm graded aggregate) of 150mm bore (dia) Drain Pipes including Packing under and Haunching to Sides of the pipes after Laying and Testing of Pipe, complete all as specified and as directed.

M&L Salt-Glazed Stone-ware Drain Pipe 150mm bore (dia), Grade ‘A’, laid in Trenches, Jointed with Cement Mortar 1:1 and testing, complete all as specified and as directed.

Soakage wells of size 3.00m dia and 2.00m of effective depth, excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in RCC 1:2:4 (nominal mix), interconnecting pipes of RCC/DWC complete filled with brick bats of size n. exc 150mm, complete all as specified and directed.

M&L for Machine pressed Precast concrete interlocking paver block any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Grade over and including 25 mm thick sand screed bed/cushioning etc.,complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 solid blocks size 400x300x100mm kerb stones (one edge rounded or chamfered as directed) setting in mortar 1:4,complete all as specified and as directed.

M&L preparing new Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of primer, complete all as specified and as directed.

M&L preparing old treated/decorated Surfaces of Walls and applying One Coat of Cement Base Paint, complete all as specified and as directed.

M&L preparing newly plastered surfaces of wall and applying Three Coats of White Wash, complete all as specified and as directed

M&L preparing newly plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed

M&L for prepration of new plastered surfaces and applying two coat of oil bound distemper over 1mm thick with wall putty white cement base and making smooth finish, complete all as specified and as directed.

M&L for preparation of old distempered surface of wall and appliying one coat of distemper oil emulsion complete all as specified and as directed.

M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L preparing new or previously untreated Wooden Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and as directed.

Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) of any description on batten/conduit and making good disturbed surfaces of Ceiling, Walls, etc. in Cement Mortar 1:3 and providing Surface Treatment so as to match the existing Finishes, complete all as specified and as directed.

Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unservicable UG cable of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down ceiling fan of any sweep, keeping with safe custody and refixing the same with replacement of unserviceable 3 core PVC insulated, PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal, Overhauling the fan, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Rigid PVC Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLS) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per item No. 163 here in before for One Ceiling Fan/Exhaust Fan Point controlled by One 1-Way Switch 5 Amp and Regulator, complete all as specified and as directed.

All as per Item no. 163 here in before but for 3pin 5Amps switch socket outlet point controlled by One Switch on the Same Board, complete all as specified and as directed.

All as per Item no. 163 here in before but or One 3 Pin 5 Amps Switch Socket Outlet Point controlled by One Switch on Independent Board, complete all as specified and as directed

Description all as per item No 163 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Socket Outlet, 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 230 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 3 Pin, 15 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volts, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Fan Regulator, Step type, Flush type, heavy duty, suitable to work on 230 Volt, AC supply and connecting up, complete all as specified and as directed.

S&F Lamp Holder Surface Bakelite with Back Plate insulated body suitable for Batten/Angle Fittings and fixed with PVC Block, conforming to IS and connecting up, complete all as specified and as directed.

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.Make Havells, Cat No: LHLDEUEBML8Z010 or equivalent in CG or Polycab.

S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal blocks for incoming and outgoing circuits, inbuilt loose wire box, ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar, 2+6 way double door openable complete all as specified and as directed.

S&F Sheet Metal Enclosure MCB DB, SPN, 4-way with 200 Amp rated Bus-bar, 240 Volt, Double Doors with Magnitic Locking System and connecting up, complete all as specified and as directed.

S&F Sheet Metal Enclosure MCB DB, SPN, 8-way with 200 Amp rated Bus-bar, 240 Volt, Double Doors with Magnitic Locking System and connecting up, complete all as specified and as directed.

S&F MCB Double Pole, 20 Amps, 240/415 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB20320B, Schinder & Legrand.)

S&F MCB SP,6 Amps, 240 Volt for fixing on MCB DB’s, 10 kA,c curve 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed.(Make- L&T, Cat No: BB10060B ,Schinder & Legrand.)

S & F wall mounted LED 18 watts , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make-Model -REGALBATTENT5UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight ,Make Havells, or equivalent in CG, Polycab.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 15 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as specified and as directed.Make-Havells,Model No - ENDURAPEARLSL25WLED757SASYTOPCMP Or Equivalent

Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 16 Sqmm 2.0 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed. NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.

Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 35 Sqmm 3.5 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed. NOTE : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items.

S&F Sub-Class ‘B’ Brick, well burnt, laid breadthwise along the length of Cable laid in trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after lay-ing the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE: For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid for.

S&F Galvanised Iron Pipe 40mm bore (dia), Light grade as in protection of UG Cable laid in Trenches/fixing with Poles with Mild Steel Flat Iron Clamps, complete all as specified and as directed. NOTE: Cost of Mild Steel Clamp, Nuts, Bolts and painting is deemed to be included in the QUOTED UNIT RATE.

S&F heavy duty exhaust fan 300 mm sweep MS body, 3 wing 1400 rpm, single phase 240 volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC coper wire run through flexible pipe. Single phase type. Make : Orient or equivalent in USHA/ Havells.

Boring holes horizontally under road without damaging the surface of road of any type (minmum 1.0 metre below the raod surface with the help of GI Tubing not ex. 50mm bore (dia) for passing of UG cable, complete all as specified and as directed.. NOTE : GI Pipe laid will be measured and paid separately under appropriate item.

S&F 5 Star rated BLDC ceiling fans AC 230 Volts single phase 1200mm sweep complete with all accessories including MS Hook, Nuts, Bolts and washer for hanging arrangement complete all as specified and directed. Make: usha, Model -Energia 32 5 Star/Bajaj/Crompton

Supply & laying Steel Water Tubing 25mm bore (dia), galvanised, ‘medium grade’ with all Fittings, fixed on walls, ceiling or laid in floors or any other situation, complete as all specified and as directed.

Supply & laying Steel Water Tubing 50mm bore (dia), Galvanised, ‘light grade’ with all Fittings,in protection of cable at road crossing/hard standing/pole protection fixed with clam as per site or any other situation, complete as all specified and as directed.

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed (as approved) complete all as specified and as directed.

Cutting of existing CI pipe laid 80 mm dia for inserting Tees for new connection of 25 mm diacomplete all as specified and as directed.

M&L for GI connection pieces for inserting 25 mm GI pipe into 80 mm distribution mains all as specified and directed.

M&L Earthing complete with Galvanised Steel Earth Plate Electrode 600x600x6mm, buried directly in ground vertically to a depth not less than 2.25 Metre below ground level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal ground level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) ‘light grade’ upto 1.0 Metre above the Floor Level of Building where Main Switch/ DB situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150 mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded aggre gate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded aggregate), reinforced with 8.0mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) ‘medium grade’ including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including removal old existing unserviceable Earthing, complete all as specified and as directed.

Sunrise Enterprise

M/S B.B. Singh Contractor